Applied Materials 10-Q 2024-01-28

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-Q

(Mark One)

☑ QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended January 28, 2024

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission File Number 000-06920

Applied Materials, Inc.

(Exact name of registrant as specified in its charter)

3050 Bowers Avenue, P.O. Box 58039, Santa Clara, California 95052-8039

(Address of principal executive offices) (Zip Code*)*

Registrant’s telephone number, including area code: (408) 727-5555

Securities registered pursuant to Section 12(b) of the Act:

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☑ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☑ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☑

Number of shares outstanding of the issuer’s common stock as of January 28, 2024: 830,897,356

APPLIED MATERIALS, INC.

FORM 10-Q FOR THE QUARTERLY PERIOD ENDED JANUARY 28, 2024

TABLE OF CONTENTS

PART I. FINANCIAL INFORMATION

APPLIED MATERIALS, INC.

CONSOLIDATED CONDENSED STATEMENTS OF OPERATIONS

(In millions, except per share amounts)

See accompanying Notes to Consolidated Condensed Financial Statements.

APPLIED MATERIALS, INC.

CONSOLIDATED CONDENSED STATEMENTS OF COMPREHENSIVE INCOME

(In millions)

See accompanying Notes to Consolidated Condensed Financial Statements.

APPLIED MATERIALS, INC.

CONSOLIDATED CONDENSED BALANCE SHEETS

(In millions)

Amounts as of January 28, 2024 are unaudited. Amounts as of October 29, 2023 are derived from the October 29, 2023 audited consolidated financial statements.

See accompanying Notes to Consolidated Condensed Financial Statements.

APPLIED MATERIALS, INC

CONSOLIDATED CONDENSED STATEMENTS OF STOCKHOLDERS’ EQUITY

(In millions, except per share amount)

| | | | | | | | | | | |

Showing the first 8K of 124K characters. Open the full section

The following management’s discussion and analysis is provided in addition to the accompanying consolidated condensed financial statements and notes, and for a full understanding of our results of operations and financial condition should be read in conjunction with the consolidated condensed financial statements and notes included in this Form 10-Q and the financial statements and notes for the fiscal year ended October 29, 2023 contained in our Form 10-K filed on December 15, 2023.

As used herein, the terms “we,” “us,” and “our” refer to Applied Materials, Inc. and its subsidiaries.

This report contains forward-looking statements that involve a number of risks and uncertainties. Examples of forward-looking statements include those regarding our future financial or operating results, customer demand and spending, end-user demand, our and market and industry trends and outlooks, cash flows and cash deployment strategies, declaration of dividends, share repurchases, business strategies and priorities, costs and cost controls, products, competitive positions, management’s plans and objectives for future operations, research and development, acquisitions, investments and divestitures, growth opportunities, restructuring and severance activities, backlog, working capital, liquidity, investment portfolio and policies, taxes, supply chain, manufacturing, properties, legal matters, claims and proceedings, and other statements that are not historical facts, as well as their underlying assumptions. Forward-looking statements may contain words such as “may,” “will,” “should,” “could,” “would,” “expect,” “plan,” “anticipate,” “believe,” “estimate,” “intend,” “potential” and “continue,” the negative of these terms, or other comparable terminology. All forward-looking statements are subject to risks and uncertainties and other important factors, including those discussed in Part II, Item 1A, “Risk Factors,” below and elsewhere in this report. These and many other factors could affect our future financial condition and operating results and could cause actual results to differ materially from expectations based on forward-looking statements made in this document or elsewhere by us or on our behalf. Forward-looking statements are based on management’s estimates, projections and expectations as of the date hereof, and we undertake no obligation to revise or update any such statements.

Overview

We provide manufacturing equipment, services and software to the semiconductor, display, and related industries. Our customers include manufacturers of semiconductor wafers and chips, liquid crystal and organic light-emitting diode (OLED) displays, and other electronic devices. These customers may use what they manufacture in their own end products or sell the items to other companies for use in electronic products. Each of our segments is subject to variable industry conditions, as demand for manufacturing equipment and services can change depending on supply and demand for chips, display technologies, and other electronic devices, as well as other factors, such as global economic, political and market conditions, the nature and timing of technological advances in fabrication processes and other factors described under “Risk Factors” in Part II, Item 1A.

We operate in three reportable segments: Semiconductor Systems, Applied Global Services, and Display and Adjacent Markets. A summary of financial information for each reportable segment is found in Note 15 of Notes to Consolidated Condensed Financial Statements. A discussion of factors that could affect our operations is set forth under “Risk Factors” in Part II, Item 1A, which is incorporated herein by reference. Product development and manufacturing activities occur primarily in the United States, Europe, Israel, and Asia. Our broad range of equipment and service products are highly technical and are sold primarily through a direct sales force.

Our results are driven primarily by customer spending on capital equipment and services to support key technology transitions or to increase production volume in response to worldwide demand for semiconductors and displays. The timing of customer investment in manufacturing equipment is also affected by the timing of next-generation process development and the timing of capacity expansion to meet end-market demand. In light of these conditions, our results can vary significantly year-over-year, as well as quarter-over-quarter.

The following table presents certain significant measurements for the periods indicated:

Showing the first 8K of 62K characters. Open the full section

We are exposed to financial market risks, including fluctuations in interest rate and foreign currency exchange rates. For information about our exposure to market risks as of October 29, 2023, see Part II, Item 7A, Quantitative and Qualitative Disclosures About Market Risk in our Annual Report on Form 10-K for the fiscal year ended October 29, 2023.

Interest Rate Risk

Available-for-sale Debt Securities - The market value of our investments in available-for-sale securities was approximately $2.3 billion at January 28, 2024. An immediate hypothetical 100 basis point increase in interest rates would result in a decrease in the fair value of investments as of January 28, 2024 of approximately $31 million.

Debt - At January 28, 2024, the aggregate principal of long-term senior unsecured notes issued by us was $5.5 billion with an estimated fair value of $5.1 billion. A hypothetical decrease in interest rates of 100 basis points would result in an increase in the fair value of our long-term senior notes issuances of approximately $409 million at January 28, 2024. From time to time we use interest rate swaps or rate lock agreements to mitigate the potential impact of changes in benchmark interest rates on interest expense and cash flows.

Foreign Currency Risk

Certain of our operations are conducted in foreign currencies, such as Japanese yen, Israeli shekel, euro and Taiwanese dollar. Hedges are used to reduce, but not eliminate, the impact of foreign currency exchange rate movements on the consolidated balance sheet, statement of operations, and statement of cash flows.

We use primarily foreign currency forward contracts to offset the impact of foreign exchange movements on non-U.S. dollar denominated monetary assets and liabilities. The foreign exchange gains and losses on the assets and liabilities are recorded in interest and other income (expense), net and are offset by the gains and losses on the hedges.

We use foreign currency forward and option contracts to hedge a portion of anticipated non-U.S. dollar denominated revenues and expenses expected to occur within the next 24 months. Gains and losses on these hedging contracts generally mitigate the effect of currency movements on our net revenue, cost of products sold, and operating expenses. A hypothetical 10% adverse change in foreign currency exchange rates relative to the U.S. Dollar would result in a decrease in the fair value of these hedging contracts of $141 million at January 28, 2024.

We do not use foreign currency forward or option contracts for trading or speculative purposes.

Disclosure Controls and Procedures

As of the end of the period covered by this report, our management conducted an evaluation, under the supervision and with the participation of our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures, as such term is defined in Rule 13a-15(e) of the Securities Exchange Act of 1934 (the Exchange Act). Based upon that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were effective as of the end of the period covered by this report in ensuring that information required to be disclosed was recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and to provide reasonable assurance that information required to be disclosed by us in such reports is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Changes in Internal Control over Financial Reporting

During the first quarter of fiscal 2024, there were no changes in the internal control over financial reporting, as such term is defined in Rule 13a-15(f) of the Exchange Act, that materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations of Disclosure Controls and Procedures and Internal Control over Financial Reporting

It should be noted that any system of controls, however well designed and operated, can provide only reasonable, and not absolute, assurance that the objectives of the system will be met. In addition, the design of any control system is based in part upon certain assumptions about the likelihood of future events.

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

The information set forth under “Legal Matters” in Note 14 in Notes to Consolidated Condensed Financial Statements is incorporated herein by reference. See also “Legal, Compliance, and Other Risks – We are exposed to various risks related to legal proceedings, claims and investigations.” in Part II, Item 1A, “Risk Factors.”

The risk factors set forth below include any material changes to, and supersede the description of, the risk factors disclosed in Part I, Item 1A of our 2023 Form 10-K. These factors could materially and adversely affect our business, financial condition or results of operations and cause reputational harm, and should be carefully considered in evaluating our business, in addition to other information presented elsewhere in this report.

Business and Industry Risks

The industries we serve can be volatile and difficult to predict.

We are a supplier to the global semiconductor and display and related industries, which historically have been cyclical and are subject to volatility and sudden changes in customer demand. Factors that impact demand for our products and services include technology inflections and advances in fabrication processes, new and emerging technologies and market drivers, production capacity relative to demand for chips and display technologies, end-user demand, customers’ capacity utilization, production volumes, access to affordable capital, business and consumer buying patterns and general economic and political conditions. Changes in demand can affect the timing and amounts of customer investments in technology and manufacturing equipment and can significantly impact our operating results. The amount and mix of our customers’ capital equipment spending between different products and technologies can also significantly impact our operating results.

To meet rapidly changing demand, we must accurately forecast demand and effectively manage our resources, investments, production capacity, supply chain, workforce, inventory, and other components of our business. We may incur unexpected or additional costs to align our business operations with changes in demand. If we do not effectively manage these challenges, our business performance and operating results may be adversely impacted. Even with effective allocation of resources and management of costs, our gross and operating margins, cash flows and earnings may be adversely impacted during periods of changing demand.

We are exposed to risks associated with an uncertain global economy.

Uncertain or adverse economic and business conditions, including uncertainties and volatility in the financial markets, national debt, fiscal or monetary concerns, rising inflation and interest rates, bank failures, and economic recession, could materially and adversely impact our operating results. Markets for semiconductors and displays depend largely on business and consumer spending and demand for electronic products. Uncertain or adverse economic and business conditions could result in decreases in consumer spending and demand. Decreases in spending and demand have caused, and may in the future cause, our customers to push out, cancel or refrain from purchasing our equipment or services, which could negatively impact demand for our products and services, reduce our backlog, increase our inventory, and materially and adversely impact our operating results.

Sudden increases in demand for electronic products have caused, and may in the future cause, a shortage of parts and materials needed to manufacture our products. Such shortages, and shipment delays due to transportation capacity and interruptions, have adversely impacted, and may in the future adversely impact, our suppliers’ ability to meet our requirements. Accelerated digital transformation may further increase demand and exacerbate shortages and strain our manufacturing capacity, which may adversely impact our ability to meet customer demand and have an adverse impact on our revenues, operating results and financial condition.

Uncertain or adverse economic and market conditions, difficulties in obtaining capital, increased costs or reduced profitability may cause some customers to scale back operations, exit businesses, merge with other manufacturers, or file for bankruptcy protection and potentially cease operations, which can result in lower sales, additional inventory or bad debt expense. Economic and industry uncertainty may impair the ability of suppliers to deliver parts and negatively affect our ability to manage operations and deliver our products. These conditions may also lead to consolidation or strategic alliances among other equipment manufacturers, which could adversely affect our ability to compete effectively.

Uncertain economic and industry conditions and supply chain challenges make it more difficult to accurately forecast operating results, make business decisions, and identify and prioritize the risks that may affect our businesses, sources and uses of cash, financial condition and results of operations. If we do not appropriately manage our business operations in response to changing economic and industry conditions, it could have a material and adverse impact on our business performance and financial condition. We may be required to implement additional cost reduction efforts, including restructuring activities, which may adversely impact our ability to capitalize on opportunities. Even during periods of economic uncertainty or lower demand, we must continue to invest in research and development and maintain a global business infrastructure to compete effectively and support our customers, which can have a negative impact on our operating results.

We maintain an investment portfolio that is subject to general credit, liquidity, market and interest rate risks. The risks to our investment portfolio may be exacerbated if financial market conditions deteriorate due to rising inflation, rising interest rates, bank failures or economic recession and, as a result, the value and liquidity of the investment portfolio and returns on pension assets, could be negatively impacted and lead to impairment charges. We also maintain cash balances in various bank accounts globally in order to fund normal operations. If any of these financial institutions become insolvent, it could limit our ability to access cash in the affected accounts, which could affect our ability to manage our operations.

We are exposed to the risks of operating a global business.

We have product development, engineering, manufacturing, sales and other operations distributed throughout many countries, and some of our business activities are concentrated in certain geographic areas. Moreover, in the three-month period ended January 28, 2024, approximately 89% of our net revenue were to customers in regions outside the United States. As a result of the global nature of our operations, our business performance and results of operations may be adversely affected by a number of factors, including:

• uncertain global economic, political and business conditions and demand;

• global trade issues and changes in and uncertainties with respect to trade and export regulations, trade policies and sanctions, tariffs, and international trade disputes, including new and changing export regulations and their impact on our ability to export products and provide services to customers;

• positions taken by governmental agencies regarding possible national, commercial or security issues posed by the development, sale or export of certain raw materials, products and technologies;

• political instability, natural disasters, regional or global health epidemics, social unrest, terrorism, acts of war or other geopolitical turmoil, or cybersecurity incidents in locations where we have operations, suppliers or sales, or that may influence the value chain of the industries we serve;

• political and social attitudes, laws, rules, regulations and policies within countries, including in China, the United States, and countries in Europe and Asia, that favor domestic companies over non-domestic companies, including efforts to promote the development and growth of local competitors and reduce dependence on foreign semiconductor equipment and manufacturing capabilities t

Showing the first 8K of 73K characters. Open the full section

During the three months ended January 28, 2024, no director or officer, as defined in Rule 16a-1(f), adopted or terminated a “Rule 10b5-1 trading arrangement” or a “non-Rule 10b5-1 trading arrangement,” each as defined in Regulation S-K Item 408.

Exhibits are numbered in accordance with the Exhibit Table of Item 601 of Regulation S-K:

† Filed herewith.

‡ Furnished herewith.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.