IDEX 10-K 2019-12-31

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

For the fiscal year ended December 31, 2019

Commission file number 1-10235

IDEX CORP****ORATION

(Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code:

(847) 498-7070

Securities Registered Pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No ¨

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ¨ No þ

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No ¨

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes þ No ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No þ

The aggregate market value, as of the last business day of the registrant’s most recently completed second fiscal quarter, of the common stock (based on the June 28, 2019 closing price of $172.14) held by non-affiliates of IDEX Corporation was $12,993,666,859.

The number of shares outstanding of IDEX Corporation’s common stock, par value $.01 per share, as of February 18, 2020 was 76,205,390.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the proxy statement with respect to the IDEX Corporation 2020 annual meeting of stockholders (the “2020 Proxy Statement”) are incorporated by reference into Part III of this Form 10-K.

Table of Contents

PART I

Cautionary Statement Under the Private Securities Litigation Reform Act

This report contains “forward-looking” statements within the meaning of the Private Securities Litigation Reform Act of 1995, as amended. These statements may relate to, among other things, capital expenditures, acquisitions, cost reductions, cash flow, cash requirements, revenues, earnings, market conditions, global economies, the anticipated timing of our acquisition of Flow Management Devices, LLC, plant and equipment capacity and operating improvements, and are indicated by words or phrases such as “anticipates,” “estimates,” “plans,” “expects,” “projects,” “forecasts,” “should,” “could,” “will,” “management believes,” “the Company believes,” “the Company intends,” and similar words or phrases. These statements are subject to inherent uncertainties and risks that could cause actual results to differ materially from those anticipated at the date of this report. The risks and uncertainties include, but are not limited to, the following: economic and political consequences resulting from terrorist attacks and wars; levels of industrial activity and economic conditions in the U.S. and other countries around the world; pricing pressures and other competitive factors and levels of capital spending in certain industries, all of which could have a material impact on order rates and the Company’s results, particularly in light of the low levels of order backlogs it typically maintains; the Company’s ability to make acquisitions and to integrate and operate acquired businesses on a profitable basis; the relationship of the U.S. dollar to other currencies and its impact on pricing and cost competitiveness; political and economic conditions in foreign countries in which the Company operates; developments with respect to trade policy and tariffs; interest rates; capacity utilization and the effect this has on costs; labor markets; market conditions and material costs; and developments with respect to contingencies, such as litigation and environmental matters and the other risk factors discussed in Item 1A, “Risk Factors” of this annual report. The forward-looking statements included here are only made as of the date of this report, and management undertakes no obligation to publicly update them to reflect subsequent events or circumstances, except as may be required by law. Investors are cautioned not to rely unduly on forward-looking statements when evaluating the information presented here.

IDEX Corporation (“IDEX,” the “Company,” “us,” “our,” or “we”) is a Delaware corporation incorporated on September 24, 1987. The Company is an applied solutions business that sells an extensive array of pumps, valves, flow meters and other fluidics systems and components and engineered products to customers in a variety of markets around the world. All of the Company’s business activities are carried out through wholly-owned subsidiaries.

The Company has three reportable business segments: Fluid & Metering Technologies (“FMT”), Health & Science Technologies (“HST”) and Fire & Safety/Diversified Products (“FSDP”). Within our three reportable segments, the Company maintains 13 platforms, where we focus on organic growth and strategic acquisitions. Each of our 13 platforms is also a reporting unit that we annually test for goodwill impairment.

The FMT segment contains the Energy platform (comprised of Corken, Liquid Controls, SAMPI and Toptech), the Valves platform (comprised of Alfa Valvole, Richter and Aegis), the Water platform (comprised of Pulsafeeder, OBL, Knight, ADS, Trebor and iPEK), the Pumps platform (comprised of Viking and Warren Rupp) and the Agriculture platform (comprised of Banjo). The HST segment contains the Scientific Fluidics & Optics platform (comprised of Eastern Plastics, Rheodyne, Sapphire Engineering, Upchurch Scientific, ERC, CiDRA Precision Services, thinXXS Microtechnology (“thinXXS”), CVI Melles Griot, Semrock, AT Films and Finger Lakes Instrumentation (“FLI”)), the Sealing Solutions platform (comprised of Precision Polymer Engineering, FTL Seals Technology, Novotema, SFC Koenig and Velcora Holding AB (“Velcora”)), the Gast platform, the Micropump platform and the Material Processing Technologies platform (comprised of Quadro, Fitzpatrick, Microfluidics and Matcon). The FSDP segment is comprised of the Fire & Safety platform (comprised of Class 1, Hale, Godiva, Akron Brass, Weldon, AWG Fittings, Dinglee, Hurst Jaws of Life, Lukas and Vetter), the Band-It platform and the Dispensing platform.

IDEX believes that each of its reporting units is a leader in its product and service areas. The Company also believes that its strong financial performance has been attributable to its ability to design and engineer specialized quality products, coupled with its ability to successfully identify, acquire and integrate strategic acquisitions.

FLUID & METERING TECHNOLOGIES SEGMENT

The Fluid & Metering Technologies segment designs, produces and distributes positive displacement pumps, flow meters, injectors and other fluid-handling pump modules and systems and provides flow monitoring and other services for the food, chemical, general industrial, water and wastewater, agriculture and energy industries. Fluid & Metering Technologies application-specific pump and metering solutions serve a diverse range of end markets, including industrial infrastructure (fossil fuels, refined and alternative fuels and water and wastewater), chemical processing, agriculture, food and beverage, pulp and paper, transportation, plastics and resins, electronics and electrical, construction and mining, pharmaceutical and bio-pharmaceutical, machinery and numerous other specialty niche markets.

Fluid & Metering Technologies accounted for 38% of IDEX’s sales in each of 2019, 2018 and 2017, respectively, with approximately 43% of its 2019 sales to customers outside the U.S. The segment accounted for 44%, 42% and 42% of total segment operating income in 2019, 2018 and 2017, respectively.

Energy. Energy consists of the Company’s Corken, Liquid Controls, SAMPI and Toptech businesses. Energy is a leading supplier of flow meters, electronic registration and control products, rotary vane and turbine pumps, reciprocating piston compressors and terminal automation control systems. Applications for Liquid Controls and SAMPI consist of positive displacement flow meters and electronic registration and control products, including mobile and stationary metering installations for wholesale and retail distribution of petroleum and liquefied petroleum gas, aviation refueling and industrial metering and dispensing of liquids and gases. Corken products consist of positive-displacement rotary vane pumps, single and multistage regenerative turbine pumps and small horsepower reciprocating piston compressors. Toptech supplies terminal automation hardware and software to control and manage inventories as well as transactional data and invoicing to customers in the oil, gas and refined-fuels markets. Energy maintains facilities in Lake Bluff, Illinois (Liquid Controls products); Longwood, Florida and Zwijndrecht, Belgium (Toptech products); Oklahoma City, Oklahoma (Corken products); and Altopascio, Italy (SAMPI products). Approximately 44% of Energy’s 2019 sales were to customers outside the U.S.

Valves. Valves consists of the Company’s Alfa Valvole, Richter and Aegis businesses. Valves is a leader in the design, manufacture and sale of specialty valve products for use in the chemical, petro-chemical, energy and sanitary markets as well as a leading producer of fluoroplastic lined corrosion-resistant magnetic drive and mechanical seal pumps, shut-off, control and safety valves for corrosive, hazardous, contaminated, pure and high-purity fluids. Alfa Valvole’s products are used in various industrial fields for fluid control, in both gas and liquid form, in all sectors of plant engineering, cosmetics, detergents, food industry, electric energy, pharmaceutical, chemical plants, petrochemical plants, oil, heating/air conditioning and also on ships, ferries and marine oil platforms. Richter’s products offer superior solutions for demanding and complex pump and valve applications in the process industry. Aegis produces specialty chemical processing valves for use in the chemical, petro-chemical, chlor-alkali and pulp and paper industries. Valves maintains operations in Casorezzo, Italy (Alfa Valvole products); Cedar Falls, Iowa, Kempen, Germany and Suzhou, China (Richter products); and Geismar, Louisiana (Aegis products). Approximately 78% of Valves’ 2019 sales were to customers outside the U.S.

Water. Water consists of the Company’s ADS, iPEK, Knight, Trebor, Pulsafeeder and OBL businesses. Water is a leading provider of metering technology, flow monitoring products and underground surveillance services for wastewater markets, alloy and non-metallic gear pumps, peristaltic pumps, transfer pumps as well as dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. ADS’ products and services provide comprehensive integrated solutions that enable industry, municipalities and government agencies to analyze and measure the capacity, quality and integrity of wastewater collection systems,

including the maintenance and construction of such systems. iPEK supplies remote controlled systems used for infrastructure inspection. Knight is a leading manufacturer of pumps and dispensing equipment for industrial laundries, commercial dishwashing and chemical metering. Trebor is a leader in high-purity fluid handling products, including air-operated diaphragm pumps and deionized water-heating systems. Trebor products are used in the manufacturing of semiconductors, disk drives and flat panel displays. Pulsafeeder products (which also include OBL products) are used to introduce precise amounts of fluids into processes to manage water quality and chemical composition as well as peristaltic pumps. Its markets include water and wastewater treatment, oil and gas, power generation, pulp and paper, chemical and hydrocarbon processing and swimming pools. Water maintains operations in Huntsville, Alabama and various other locations in the United States, Canada and Australia (ADS products and services); Hirschegg, Austria and Sulzberg, Germany (iPEK products); Rochester, New York, Punta Gorda, Florida, and Milan, Italy (Pulsafeeder products); West Jordan, Utah (Trebor products); Irvine, California, Mississauga, Ontario, Canada, and Lewes, England (Knight products); and a maquiladora in Ciudad Juarez, Chihuahua, Mexico (Knight products). Approximately 44% of Water’s 2019 sales were to customers outside the U.S.

Pumps. Pumps consists of the Company’s Viking and Warren Rupp businesses. Pumps is a leading manufacturer of rotary internal gear, external gear, vane and rotary lobe pumps, custom-engineered OEM pumps, strainers, gear reducers and engineered pump systems. Viking’s products consist of external gear pumps, strainers and reducers and related controls used for transferring and metering thin and viscous liquids sold under the Viking and Wright Flow brands. Viking products primarily serve the chemical, petroleum, pulp and paper, plastics, paints, inks, tanker trucks, compressor, construction, food and beverage, personal care, pharmaceutical and biotech markets. Warren Rupp products (which include Versa-Matic products) are used for abrasive and semisolid materials as well as for applications where product degradation is a concern or where electricity is not available or should not be used. Warren Rupp products, which include air-operated double diaphragm pumps, primarily serve the chemical, paint, food processing, electronics, construction, utilities, oil and gas, mining and industrial maintenance markets. Pumps maintains operations in Cedar Falls, Iowa (Viking and Wright Flow products); Eastbourne, England (Wright Flow products); Shannon, Ireland (Viking and Blagdon products); and Mansfield, Ohio (Warren Rupp products). Pumps primarily uses independent distributors to market and sell its products. Approximately 37% of Pumps’ 2019 sales were to customers outside the U.S.

Agriculture. Agriculture consists of the Company’s Banjo business. Banjo is a provider of special purpose, severe-duty pumps, valves, fittings and systems used in liquid handling. Banjo is based in Crawfordsville, Indiana with distribution facilities in Didam, The Netherlands and Valinhos, Brazil. Its products are used in agriculture (approximately 71% of revenue) and industrial (approximately 29% of revenue) applications. Approximately 20% of Banjo’s 2019 sales were to customers outside the U.S.

HEALTH & SCIENCE TECHNOLOGIES SEGMENT

The Health & Science Technologies segment designs, produces and distributes a wide range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including very high precision, low-flow rate pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, high performance molded and extruded sealing components, custom mechanical and shaft seals for a variety of end markets including food and beverage, marine, chemical, wastewater and water treatment, engineered hygienic mixers and valves for the global biopharmaceutical industry, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, biotechnology, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision photonic solutions used in life sciences, research and defense markets and precision gear and peristaltic pump technologies that meet exacting original equipment manufacturer specifications.

Health & Science Technologies accounted for 37%, 36% and 36% of IDEX’s sales in 2019, 2018 and 2017, respectively, with approximately 55% of its 2019 sales to customers outside the U.S. The segment accounted for 31%, 32% and 32% of total segment operating income in 2019, 2018 and 2017, respectively.

Scientific Fluidics & Optics. Scientific Fluidics & Optics consists of the Company’s Eastern Plastics, Rheodyne, Sapphire Engineering, Upchurch Scientific, ERC, CiDRA Precision Services, thinXXS, CVI Melles Griot, Semrock, AT Films (including Precision Photonics products) and FLI businesses. Eastern Plastics products, which consist of high-precision integrated fluidics and associated engineered manifolds, are used in a broad set of end markets including medical diagnostics, analytical instrumentation and laboratory automation. Rheodyne products consist of injectors, valves, fittings and accessories for the analytical instrumentation market. These products are used by manufacturers of high pressure liquid chromatography (“HPLC”) equipment servicing the pharmaceutical, biotech, life science, food and beverage, and chemical markets. Sapphire Engineering and Upchurch Scientific products consist of fluidic components and systems for the analytical, biotech and diagnostic instrumentation markets, such as fittings, precision-dispensing pumps and valves, tubing and integrated tubing assemblies, filter sensors and other micro-fluidic and nano-fluidic components as well as advanced column hardware and accessories for the high performance liquid chromatography market. The products produced by Sapphire Engineering and Upchurch Scientific primarily serve the pharmaceutical, drug discovery, chemical, biochemical processing, genomics/proteomics research, environmental labs, food/agriculture, medical lab, personal care and plastics/polymer/rubber production markets. ERC manufactures gas liquid separations and detection solutions for the life science, analytical instrumentation and clinical chemistry markets. ERC’s products consist of in-line membrane vacuum degassing solutions, refractive index detectors and ozone generation systems. CiDRA Precision Services’ products consist of microfluidic components serving the life science, health and industrial markets and thinXXS is a leader in the design, manufacture and sale of microfluidic components serving the point of care, veterinary and life science markets. CVI Melles Griot is a global leader in the design and manufacture of precision photonic solutions used in the life science, research, semiconductor, security and defense markets. CVI Melles Griot’s innovative products are focused on the generation, control and productive use of light for a variety of key science and industrial applications. Products consist of specialty lasers and light sources, electro-optical components, specialty shutters, opto-mechanical assemblies and components. In addition, CVI Melles Griot produces critical components for life science research, electronics manufacturing, military and other industrial applications including lenses, mirrors, filters and polarizers. These components are utilized in a number of important applications such as spectroscopy, cytometry (cell counting), guidance systems for target designation, remote sensing, menology and optical lithography. Semrock is a provider of optical filters for biotech and analytical instrumentation in the life science market. Semrock’s optical filters are produced using state-of-the-art manufacturing processes which enable it to offer its customers significant improvements in instrument performance and reliability. AT Films specializes in optical components and coatings for applications in the fields of scientific research, defense, aerospace, telecommunications and electronics manufacturing. AT Films’ core competence is the design and manufacture of filters, splitters, reflectors and mirrors with the precise physical properties required to support their

customers’ most challenging and cutting-edge optical applications. The Precision Photonics portion of its business specializes in optical components and coatings for applications in the fields of scientific research, aerospace, telecommunications and electronics manufacturing. FLI specializes in the design, development and production of low-noise cooled charge-coupled device (“CCD”) and high speed, high-sensitivity Scientific complementary metal-oxide semiconductor (“CMOS”) cameras for the astronomy and life sciences markets. Scientific Fluidics & Optics has facilities in Bristol, Connecticut (Eastern Plastics products); Rohnert Park, California (Rheodyne products); Middleboro, Massachusetts (Sapphire Engineering products); Oak Harbor, Washington (Upchurch Scientific products); Kawaguchi, Japan (ERC products); Wallingford, Connecticut (CiDRA Precision Services products); Zweibrücken, Germany (thinXXS products); Albuquerque, New Mexico, Rochester, New York, Leicester, England and Didam, The Netherlands (CVI Melles Griot products); Rochester, New York (Semrock products); Boulder, Colorado (AT Films products); and Lima, New York (FLI products). Approximately 51% of Scientific Fluidics & Optics’ 2019 sales were to customers outside the U.S.

Sealing Solutions. Sealing Solutions consists of the Company’s Precision Polymer Engineering, FTL Seals Technology, Novotema, SFC Koenig and Velcora businesses. Precision Polymer Engineering is a provider of proprietary high performance seals and advanced sealing solutions for a diverse range of global industries and applications, including hazardous duty, analytical instrumentation, semiconductor, process technologies, oil and gas, pharmaceutical, electronics and food applications. Precision Polymer Engineering is headquartered in Blackburn, England with an additional manufacturing facility in Brenham, Texas. FTL Seals Technology, located in Leeds, England, specializes in the design and application of high integrity rotary seals, specialty bearings and other custom products for the mining, power generation and marine markets. Novotema, located in Villongo, Italy, is a leader in the design, manufacture and sale of specialty sealing solutions for use in the building products, gas control, transportation, industrial and water markets. SFC Koenig is a producer of highly engineered expanders and check valves for critical applications across the transportation, hydraulic, aviation and medical markets. SFC Koenig is based in Dietikon, Switzerland, with additional facilities in North Haven, Connecticut, Illerrieden, Germany, and Suzhou, China. Velcora and its operating subsidiaries, Roplan and Steridose, are headquartered in Sweden with operations in China, the United Kingdom and the United States. Roplan is a global manufacturer of custom mechanical and shaft seals for a variety of end markets including food and beverage, marine, chemical, wastewater and water treatment. Steridose develops engineered hygienic mixers and valves for the global biopharmaceutical industry. Approximately 78% of Sealing Solutions’ 2019 sales were to customers outside the U.S.

Gast. The Gast business is a leading manufacturer of air-moving products, including air motors, low-range and medium-range vacuum pumps, vacuum generators, regenerative blowers and fractional horsepower compressors. Gast products are used in a variety of long-life applications requiring a quiet, clean source of moderate vacuum or pressure. Gast products primarily serve the medical equipment, environmental equipment, computers and electronics, printing machinery, paint mixing machinery, packaging machinery, graphic arts and industrial manufacturing markets. Based in Benton Harbor, Michigan, Gast also has a logistics and commercial center in Redditch, England. Approximately 25% of Gast’s 2019 sales were to customers outside the U.S.

Micropump. Micropump, headquartered in Vancouver, Washington, is a leader in small, precision-engineered, magnetically and electromagnetically driven rotary gear, piston and centrifugal pumps. Micropump products are used in low-flow abrasive and corrosive applications. Micropump products primarily serve the continuous ink-jet printing, medical equipment, chemical processing, pharmaceutical, refining, laboratory, electronics, textiles, peristaltic metering pumps, analytical process controllers and sample preparation systems markets. Approximately 74% of Micropump’s 2019 sales were to customers outside the U.S.

Material Processing Technologies. Material Processing Technologies consists of the Company’s Quadro, Fitzpatrick, Microfluidics and Matcon businesses. Quadro is a leading provider of particle control solutions for the pharmaceutical and bio-pharmaceutical markets. Based in Waterloo, Canada, Quadro’s core capabilities include fine milling, emulsification and special handling of liquid and solid particulates for laboratory, pilot phase and production scale processing. Fitzpatrick is a global leader in the design and manufacture of process technologies for the pharmaceutical, food and personal care markets. Fitzpatrick designs and manufactures customized size reduction, roll compaction and drying systems to support their customers’ product development and manufacturing processes. Fitzpatrick is headquartered in Waterloo, Canada. Microfluidics is a global leader in the design and manufacture of laboratory and commercial equipment used in the production of micro and nano scale materials for the pharmaceutical and chemical markets. Microfluidics is the exclusive producer of the Microfluidizer family of high shear fluid processors for uniform particle size reduction, robust cell disruption and nanoparticle creation. Microfluidics is also based in Waterloo, Canada and has offices in Newton, Massachusetts. Matcon is a global leader in material processing solutions for high value powders used in the manufacture of pharmaceuticals, food, plastics and fine chemicals. Matcon’s innovative products consist of the original cone valve powder discharge system and filling, mixing and packaging systems, all of which support its customers’ automation and process requirements. These products are critical to its customers’ need to maintain clean, reliable and repeatable formulations of prepackaged foods and pharmaceuticals while helping them achieve lean and agile manufacturing. Matcon is located in Evesham, England. Approximately 61% of Material Processing Technologies’ 2019 sales were to customers outside the U.S.

FIRE & SAFETY/DIVERSIFIED PRODUCTS SEGMENT

The Fire & Safety/Diversified Products segment designs, produces and distributes firefighting pumps, valves and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications and precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world.

The Fire & Safety/Diversified Products segment accounted for 25%, 26% and 26% of IDEX’s sales in 2019, 2018 and 2017, respectively, with approximately 52% of its 2019 sales to customers outside the U.S. The segment accounted for 25%, 26% and 26% of total segment operating income in 2019, 2018 and 2017, respectively.

Fire & Safety. Fire & Safety consists of the Company’s Class 1, Hale, Godiva, Akron Brass, AWG Fittings, Dinglee, Hurst Jaws of Life, Lukas and Vetter businesses, which produce truck-mounted and portable fire pumps, stainless steel valves, monitors, apparatus valves, nozzles, foam and compressed air foam systems, pump modules and pump kits, electronic controls and information systems, conventional and networked electrical systems, mechanical components for the fire, rescue and specialty vehicle markets, hydraulic, battery, gas and electric-operated rescue equipment, hydraulic re-railing equipment, hydraulic tools for industrial applications, recycling cutters, pneumatic lifting and sealing bags for vehicle and aircraft rescue, environmental protection and disaster control and shoring equipment for vehicular or structural collapse. Fire & Safety’s customers are OEMs as well as public and private fire and rescue organizations. Fire & Safety maintains facilities in Ocala, Florida (Class 1 and Hale products); Warwick, England (Godiva products); Wooster and Columbus, Ohio (Akron Brass and Weldon products); Ballendorf, Germany (AWG Fittings products); Shelby, North Carolina (Hurst Jaws of Life products); Tianjin, China (Dinglee products); Erlangen, Germany (Lukas products); and Zulpich, Germany (Vetter products). Approximately 50% of Fire & Safety’s 2019 sales were to customers outside the U.S.

Band-It. Band-It is a leading producer of high-quality stainless steel banding, buckles and clamping systems. The BAND-IT brand is highly recognized worldwide. Band-It products are used for securing exhaust system heat and sound shields, industrial hose fittings, traffic signs and signals, electrical cable shielding, identification and bundling and in numerous other industrial and commercial applications. Band-It products primarily serve the automotive, transportation equipment, oil and gas, general industrial maintenance, electronics, electrical, communications, aerospace, utility, municipal and subsea marine markets. Band-It is based in Denver, Colorado, with additional operations in Staveley, England. Approximately 41% of Band-It’s 2019 sales were to customers outside the U.S.

Dispensing. Dispensing produces precision equipment for dispensing, metering and mixing colorants and paints used in a variety of retail and commercial businesses around the world. Dispensing is a global supplier of precision-designed tinting, mixing, dispensing and measuring equipment for auto refinishing and architectural paints. Dispensing products are used in retail and commercial stores, hardware stores, home centers, department stores, automotive body shops as well as point-of-purchase dispensers. Dispensing maintains facilities in Sassenheim, The Netherlands, Wheeling, Illinois, Unanderra, Australia and Milan, Italy as well as IDEX shared manufacturing facilities in India and China. Approximately 67% of Dispensing’s 2019 sales were to customers outside the U.S.

INFORMATION APPLICABLE TO THE COMPANY’S BUSINESS IN GENERAL AND ITS SEGMENTS

Competitors

The Company’s businesses participate in highly competitive markets. IDEX believes that the principal points of competition are product quality, design and engineering capabilities, product development, conformity to customer specifications, quality of post-sale support, timeliness of delivery and effectiveness of our distribution channels.

Principal competitors of the Fluid & Metering Technologies segment are the Pumps Group (Maag, Blackmer and Wilden products) of Dover Corporation (with respect to pumps and small horsepower compressors used in liquefied petroleum gas distribution facilities, rotary gear pumps and air-operated double-diaphragm pumps); Milton Roy LLC (with respect to metering pumps and controls); and Tuthill Corporation (with respect to rotary gear pumps).

Principal competitors of the Health & Science Technologies segment are the Thomas division of Gardner Denver, Inc. (with respect to vacuum pumps and compressors); Thermo Scientific Dionex products (with respect to analytical instrumentation); Parker Hannifin (with respect to sealing devices); Valco Instruments Co., Inc. (with respect to fluid injectors and valves); and Gooch & Housego PLC (with respect to electro-optic and precision photonics solutions used in the life sciences market).

The principal competitors of the Fire & Safety/Diversified Products segment are Waterous Company, a unit of American Cast Iron Pipe Company (with respect to truck-mounted firefighting pumps); Holmatro, Inc. (with respect to rescue tools); Corob S.p.A. (with respect to dispensing and mixing equipment for the paint industry); and Panduit Corporation (with respect to stainless steel bands, buckles and clamping systems).

Customers

None of our customers in 2019 accounted for more than two percent of net sales.

Employees

At December 31, 2019, the Company had 7,439 employees. Approximately 7% of employees were represented by labor unions, with various contracts expiring through June 2023. Management believes that the Company has a positive relationship with its employees. The Company historically has been able to renegotiate its collective bargaining agreements satisfactorily, with its last work stoppage occurring in March 1993.

Suppliers

The Company manufactures many of the parts and components used in its products. Substantially all materials, parts and components purchased by the Company are available from multiple sources.

Inventory and Backlog

The Company regularly and systematically adjusts production schedules and quantities based on the flow of incoming orders. Backlogs typically are limited to two months of production. While total inventory levels also may be affected by changes in orders, the Company generally tries to maintain relatively stable inventory levels based on its assessment of the requirements of the various industries served.

Raw Materials

The Company uses a wide variety of raw materials which are generally available from a number of sources. As a result, shortages from any single supplier have not had, and are not likely to have a material impact on operations.

Shared Services

The Company has production facilities in Suzhou, China and Vadodara, India that support multiple business units. IDEX also has personnel in China, India, Dubai, Mexico, Latin America and Singapore that provide sales and marketing, product design and engineering and sourcing support to its business units as well as personnel in various locations in South America, the Middle East, Korea and Japan to support sales and marketing efforts of IDEX businesses in those regions.

Segment Information

For segment financial information for the years 2019, 2018 and 2017, including financial information about foreign and domestic sales and operations, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and Note 13 of the Notes to Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data.”

Information about Our Executive Officers

Set forth below are the names of the executive officers of the Company, their ages, years of service, the positions held by them and their business experience during the past five years.

Mr. Silvernail has served as President and Chief Executive Officer since August 2011 and as Chairman of the Board since January 2012. Prior to that, Mr. Silvernail was Vice President-Group Executive Health & Science Technologies, Global Dispensing and Fire & Safety/Diversified Products from January 2011 to August 2011. From February 2010 to December 2010, Mr. Silvernail was Vice President-Group Executive Health & Science Technologies and Global Dispensing. Mr. Silvernail joined IDEX in January 2009 as Vice President-Group Executive Health & Science Technologies.

Mr. Grogan has served as Senior Vice President and Chief Financial Officer since January 2017. Prior to that, Mr. Grogan served as Vice President of Finance, Operations from July 2015 through January 2017. From January 2012 through July 2015, Mr. Grogan was Vice President-Finance for the Company’s Health & Science Technologies and Fire & Safety/Diversified Products segments.

Mr. Ashleman has served as Senior Vice President and Chief Operating Officer since July 2015. Prior to that, Mr. Ashleman served as the Vice President-Group Executive of the Company’s Health & Science Technologies and Fire & Safety/Diversified Products segments from January 2014 through July 2015 and President-Group Executive of the Company’s Fire & Safety/Diversified Products segment from 2011 through January 2014. Mr. Ashleman joined IDEX in 2008 as the President of Gast Manufacturing.

Mr. Bucklew has served as the Senior Vice President-Chief Human Resources Officer since joining IDEX in March 2012. Prior to joining IDEX, Mr. Bucklew served as the Vice President of Human Resources for Accretive Health from March 2009 to March 2012.

Ms. Cade has served as Senior Vice President, General Counsel and Corporate Secretary since joining IDEX in October 2015. Prior to joining IDEX, Ms. Cade was Senior Vice President, General Counsel, Corporate Secretary and Chief Compliance Officer for SunCoke Energy, Inc. from March 2011 to October 2015 and held various roles at PPG Industries before joining SunCoke.

Mr. Salliotte has served as Senior Vice President-Corporate Development since March 2018. Prior to that, Mr. Salliotte served as Senior Vice President-Corporate Strategy, Mergers & Acquisitions and Treasury since February 2011. Mr. Salliotte joined IDEX in October 2004 as Vice President-Strategy and Business Development.

Mr. Yates has served as Vice President and Chief Accounting Officer since February 2010, and served as interim Chief Financial Officer from September 2016 to December 2016. Mr. Yates joined IDEX as Vice President-Controller in October 2005.

The Company’s executive officers are elected at a meeting of the Board of Directors immediately following the annual meeting of stockholders, and they serve until the meeting of the Board immediately following the next annual meeting of stockholders, or until their successors are duly elected and qualified or until their death, resignation or removal.

Public Filings

Copies of the Company’s annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports are made available free of charge at www.idexcorp.com as soon as reasonably practicable after being filed electronically with the United States Securities and Exchange Commission (the “SEC”). Our reports are also available free of charge on the SEC’s website, www.sec.gov. Information on the Company’s website is not incorporated into this Form 10-K.

For an enterprise as diverse and complex as the Company, a wide range of factors present risks to the Company and could materially affect future developments and performance. In addition to the factors affecting specific business operations identified in connection with the description of our operations and the financial results of our operations elsewhere in this report, the most significant of these factors are included below. Current global economic events and conditions may amplify many of these risks. These risks are not the only risks that may affect us. Additional risks that we are not aware of or do not believe are material at the time of this filing may also become important factors that adversely affect our business.

Changes in U.S. or International Economic Conditions Could Materially Adversely Affect the Sales and Profitability of Our Businesses.

In 2019, 50% of the Company’s sales were derived from domestic operations while 50% were derived from international operations. The Company’s largest end markets include industrial, semiconductor, automotive, life sciences and medical technologies, fire and rescue, oil and gas, paint and coatings, chemical processing, agriculture, water and wastewater treatment and optical filters and components. A slowdown in the U.S. or global economy and, in particular, any of these specific end markets could materially reduce the Company’s sales and profitability.

Change to Geopolitical and Economic Conditions in the U.S. and Foreign Countries in Which We Operate Could Adversely Affect Our Business.

In 2019, approximately 50% of our total sales were to customers outside the U.S. We expect our international operations and export sales to continue to be significant for the foreseeable future. Our sales from international operations and our sales from export are both subject in varying degrees to risks inherent in doing business outside the U.S. These risks include the following:

Any of these events could have a materially adverse impact on our business and operations.

Our Inability to Continue to Develop New Products Could Limit Our Sales Growth.

Our ability to continue to grow organically is tied in large part to our ability to continue to develop new products. A failure to continue to develop and deliver new, innovative and competitive products to the market could limit our sales growth and negatively impact our business, financial condition, results of operations and cash flow.

Our Growth Strategy Includes Acquisitions and We May Not be Able to Make Acquisitions of Suitable Candidates or Integrate Acquisitions Successfully.

Our historical growth has included, and our future growth is likely to continue to include, acquisitions. We intend to continue to seek acquisition opportunities both to expand into new markets and to enhance our position in existing markets throughout the world. We may not be able to successfully identify suitable candidates, negotiate appropriate acquisition terms, obtain financing needed to consummate those acquisitions, complete proposed acquisitions or successfully integrate acquired businesses into our existing operations. In addition, any acquisition, once successfully integrated, may not perform as planned, be accretive to earnings, or otherwise prove beneficial to us.

Acquisitions involve numerous risks, including the assumption of undisclosed or unindemnified liabilities, difficulties in the assimilation of the operations, technologies, services and products of the acquired companies and the diversion of management’s

attention from other business concerns. In addition, prior acquisitions have resulted in, and future acquisitions could result in, the incurrence of substantial additional indebtedness and other expenses.

The Markets We Serve are Highly Competitive and this Competition Could Reduce our Sales and Operating Margins.

Most of our products are sold in competitive markets. Maintaining and improving our competitive position will require continued investment by us in manufacturing, engineering, quality standards, marketing, customer service and support and our distribution networks. We may not be successful in maintaining our competitive position. Our competitors may develop products that are superior to our products or may develop methods of more efficiently and effectively providing products and services or may adapt more quickly than us to new technologies or evolving customer requirements. Pricing pressures may require us to adjust the prices of our products to stay competitive. We may not be able to compete successfully with our existing competitors or with new competitors. Failure to continue competing successfully could reduce our sales, operating margins and overall financial performance.

We are Dependent on the Availability of Raw Materials, Parts and Components Used in Our Products.

While we manufacture certain parts and components used in our products, we require substantial amounts of raw materials and purchase some parts and components from suppliers. The availability and prices for raw materials, parts and components may be subject to curtailment or change due to, among other things, suppliers’ allocations to other purchasers, interruptions in production by suppliers, including due to geopolitical unrest, unfavorable economic or industry conditions, labor disruptions, catastrophic weather events, natural disasters or the occurrence of a contagious disease or illness, changes in exchange rates and prevailing price levels. Any change in the supply of, or price for, these raw materials or parts and components could materially affect our business, financial condition, results of operations and cash flow.

Significant Movements in Foreign Currency Exchange Rates May Harm Our Financial Results.

We are exposed to fluctuations in foreign currency exchange rates, particularly with respect to the Euro, Swiss Franc, Canadian Dollar, British Pound, Indian Rupee, Chinese Renminbi and Swedish Krona. Any significant change in the value of the currencies of the countries in which we do business against the U.S. Dollar could affect our ability to sell products competitively and control our cost structure, which could have a material adverse effect on our results of operations. For additional detail related to this risk, see Part II, Item 7A, “Quantitative and Qualitative Disclosures About Market Risk.”

Fluctuations in Interest Rates Could Adversely Affect Our Results of Operations and Financial Position.

Our profitability may be adversely affected during any periods of unexpected or rapid increases in interest rates. We maintain a revolving credit facility, which bears interest at either an alternate base rate or adjusted LIBOR plus, in each case, an applicable margin based on the Company's senior, unsecured, long-term debt rating or the Company’s applicable leverage ratio. A significant increase in LIBOR would significantly increase our cost of borrowings. We are also exposed to risks if the U.S. Federal Reserve raises its benchmark interest rate, which may reduce the availability and increase the cost of obtaining new debt and refinancing existing indebtedness. For additional detail related to this risk, see Part II, Item 7A, "Quantitative and Qualitative Disclosures About Market Risk."

An Unfavorable Outcome of Any of Our Pending Contingencies or Litigation Could Adversely Affect Us.

We are currently involved in pending and threatened legal, regulatory and other proceedings arising in the ordinary course of business. These proceedings may pertain to matters such as product liability or contract disputes, and may also involve governmental inquiries, inspections, audits or investigations relating to issues such as tax matters, intellectual property, environmental, health and safety issues, governmental regulations, employment and other matters. Where it is reasonably possible to do so, we accrue estimates of the probable costs for the resolution of these matters. These estimates are developed in consultation with outside counsel and are based upon an analysis of potential results and the availability of insurance coverage, assuming a combination of litigation and settlement strategies. It is possible, however, that future operating results for any particular quarter or annual period could be materially affected by changes in our assumptions, the continued availability of insurance coverage or the effectiveness of our strategies related to these proceedings. For additional detail related to this risk, see Item 3, “Legal Proceedings” and Note 10 in Part II, Item 8, “Financial Statements and Supplementary Data.”

Our Intangible Assets, Including Goodwill, are a Significant Portion of Our Total Assets and a Write-off of Our Intangible Assets or Goodwill Would Adversely Impact Our Operating Results and Significantly Reduce Our Net Worth.

Our total assets reflect substantial intangible assets, primarily goodwill and identifiable intangible assets. At December 31, 2019, goodwill and intangible assets totaled $1,779.7 million and $388.0 million, respectively. These assets primarily result from our acquisitions, representing the excess of the purchase price over the fair value of the tangible net assets we have acquired. Annually, or when certain events occur that require a more current valuation, we assess whether there has been an impairment in the value of our goodwill and identifiable intangible assets. If future operating performance at one or more of our reporting units were to fall significantly below forecasted levels, we could be required to reflect, under current applicable accounting rules, a non-cash charge to operating income for an impairment. Any determination requiring the write-off of a significant portion of our goodwill or identifiable intangible assets would adversely impact our results of operations and net worth. See Note 5 in Part II, Item 8, “Financial Statements and Supplementary Data” for further discussion on goodwill and intangible assets.

A Significant or Sustained Decline in Commodity Prices, Including Oil, Could Negatively Impact the Levels of Expenditures by Certain of Our Customers.

Demand for our products depends, in part, on the level of new and planned expenditures by certain of our customers. The level of expenditures by our customers is dependent on, among other factors, general economic conditions, availability of credit, economic conditions within their respective industries and expectations of future market behavior. Volatility in commodity prices, including oil, can negatively affect the level of these activities and can result in postponement of capital spending decisions or the delay or cancellation of existing orders. The ability of our customers to finance capital investment and maintenance may also be affected by the conditions in their industries. Reduced demand for our products could result in the delay or cancellation of existing orders or lead to excess manufacturing capacity, which unfavorably impacts our absorption of fixed manufacturing costs. This reduced demand could have a material adverse effect on our business, financial condition and results of operations.

Our Success Depends on Our Executive Management and Other Key Personnel.

Our future success depends to a significant degree on the skills, experience and efforts of our executive management and other key personnel and their ability to provide the Company with uninterrupted leadership and direction. The loss of the services of any of our executive officers or a failure to provide adequate succession plans for key personnel could have an adverse impact. The availability of highly qualified talent is limited and the competition for talent is robust. However, we provide long-term equity incentives and certain other benefits for our executive officers which provide incentives for them to make a long-term commitment to our Company. Our future success will also depend on our ability to have adequate succession plans in place and to attract, retain and develop qualified personnel. A failure to efficiently replace executive management members and other key personnel and to attract, retain and develop new qualified personnel could have an adverse effect on our operations and implementation of our strategic plan.

Challenges with Respect to Labor Availability Could Negatively Impact our Ability to Operate or Grow our Business.

Our success depends in part on the ability of our businesses to proactively attract, motivate and retain a qualified and highly skilled workforce in an intensely competitive labor market. A failure to attract, motivate and retain highly skilled personnel could adversely affect our operating results or our ability to operate or grow our business. Additionally, any labor stoppages or labor disruptions, including due to geopolitical unrest, unfavorable economic or industry conditions, catastrophic weather events, natural disasters or the occurrence of a contagious disease or illness could adversely affect our operating results or our ability to operate or grow our business.

Our Business Operations May Be Adversely Affected by Information Systems Interruptions or Intrusion.

We depend on various information technologies throughout our Company to administer, store and support multiple business activities. If these systems (or the systems of our customers or third-party hosting services) are damaged, cease to function properly or are subject to cyber-security attacks, such as those involving unauthorized access, malicious software and/or other intrusions, we could experience production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromising of confidential or otherwise protected information, destruction or corruption of data, security breaches, other manipulation or improper use of our systems or networks, financial losses from remedial actions, loss of business or potential liability, penalties, fines and/or damage to our reputation. While we attempt to mitigate these risks by employing a number of measures, including employee training, technical security controls and maintenance of backup and protective systems, our systems, networks, products and services remain potentially vulnerable to known or unknown threats, any of which could have a material adverse effect on our business, financial condition or results of operations. Further, given the

unpredictability, nature and scope of cyber-security attacks, it is possible that potential vulnerabilities could go undetected for an extended period.

Failure To Comply with the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act or Other Applicable Anti-bribery Laws Could Have an Adverse Effect on Our Business.

The U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments for the purpose of obtaining or retaining business. Recent years have seen a substantial increase in anti-bribery law enforcement activity with more frequent and aggressive investigations and enforcement proceedings by both the Department of Justice and the SEC, increased enforcement activity by non-U.S. regulators and increases in criminal and civil proceedings brought against companies and individuals. Our policies mandate compliance with all anti-bribery laws. However, we operate in certain countries that are recognized as having governmental and commercial corruption. Our internal control policies and procedures may not always protect us from reckless or criminal acts committed by our employees or third-party intermediaries. Violations of these anti-bribery laws may result in criminal or civil sanctions, which could have a material adverse effect on our business, financial condition and results of operations.

None.

The Company’s principal plants and offices have an aggregate floor space area of approximately 4.7 million square feet, of which 3.1 million square feet (66%) is located in the U.S. and approximately 1.6 million square feet (34%) is located outside the U.S., primarily in Germany (10%), U.K. (6%), Italy (5%), India (3%), China (2%), Sweden (2%), Canada (2%) and The Netherlands (2%). Management considers these facilities suitable and adequate for the Company’s operations. Management believes the Company can meet demand increases over the near term with its existing facilities, especially given its operational improvement initiatives that usually increase capacity. The Company’s executive office occupies 36,588 square feet of leased space in Lake Forest, Illinois and 16,268 square feet of leased space in Chicago, Illinois.

Approximately 2.9 million square feet (61%) of the principal plant and office floor area is owned by the Company and the balance is held under lease. Approximately 1.9 million square feet (39%) of the principal plant and office floor area is held by business units in the Fluid & Metering Technologies segment; 1.4 million square feet (30%) is held by business units in the Health & Science Technologies segment; and 1.2 million square feet (26%) is held by business units in the Fire & Safety/Diversified Products segment. The remaining 0.2 million square feet (5%) include the executive office as well as shared services locations.

The Company and its subsidiaries are party to legal proceedings as described in Note 10 in Part II, Item 8, “Commitments and Contingencies,” and such disclosure is incorporated by reference into this Item 3, “Legal Proceedings.” In addition, the Company and six of its subsidiaries are presently named as defendants in a number of lawsuits claiming various asbestos-related personal injuries, allegedly as a result of exposure to products manufactured with components that contained asbestos. These components were acquired from third party suppliers and were not manufactured by the Company or any of the defendant subsidiaries. To date, the majority of the Company’s settlements and legal costs, except for costs of coordination, administration, insurance investigation and a portion of defense costs, have been covered in full by insurance, subject to applicable deductibles. However, the Company cannot predict whether and to what extent insurance will be available to continue to cover these settlements and legal costs, or how insurers may respond to claims that are tendered to them. Claims have been filed in jurisdictions throughout the United States and the United Kingdom. Most of the claims resolved to date have been dismissed without payment. The balance of the claims have been settled for various insignificant amounts. Only one case has been tried, resulting in a verdict for the Company’s business unit. No provision has been made in the financial statements of the Company, other than for insurance deductibles in the ordinary course, and the Company does not currently believe the asbestos-related claims will have a material adverse effect on the Company’s business, financial position, results of operations or cash flows.

Not applicable.

PART II

The Company’s common stock trades on the New York Stock Exchange under the symbol “IEX”. As of February 18, 2020, there were approximately 5,416 stockholders of record of our common stock and there were 76,205,390 shares outstanding.

Our payment of dividends in the future will be determined by our Board of Directors and will depend on business conditions, our earnings and other factors.

For information pertaining to securities authorized for issuance under equity compensation plans and the related weighted average exercise price, see Part III, Item 12, “Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.”

The Company’s purchases of common stock during the quarter ended December 31, 2019 are as follows:

Performance Graph. The following table compares total stockholder returns over the last five years to the Standard & Poor’s (the “S&P”) 500 Index, the S&P Midcap Industrials Sector Index and the Russell 2000 Index assuming the value of the investment in our common stock and each index was $100 on December 31, 2014. Total return values for our common stock, the S&P 500 Index, S&P Midcap Industrials Sector Index and the Russell 2000 Index were calculated on cumulative total return values assuming reinvestment of dividends. The stockholder return shown on the graph below is not necessarily indicative of future performance.

The information contained in this Performance Graph section shall not be deemed to be “soliciting material” or “filed” with the SEC, nor shall such information be incorporated by reference into any future filing under the Securities Act of 1933 or the Securities Exchange Act of 1934.

Management uses Adjusted gross profit, Adjusted operating income, Adjusted net income and Adjusted EPS as metrics by which to measure performance of the Company since they exclude items that are not reflective of ongoing operations, such as gains/losses on the sale of businesses, restructuring expenses, a fair value inventory step-up charge and pension settlements. Management also supplements its U.S. GAAP financial statements with adjusted information to provide investors with greater insight, transparency and a more comprehensive understanding of the information used by management in its financial and operational decision making.

EBITDA means earnings before interest, income taxes, depreciation and amortization. Given the acquisitive nature of the Company, which results in a higher level of amortization expense from recently acquired businesses, management uses EBITDA as an internal operating metric to provide another representation of the businesses’ performance across our three segments and for enterprise valuation purposes. EBITDA is also used to calculate certain financial covenants, as discussed in Note 6 of the Notes to Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data.” In addition, EBITDA has been adjusted for items that are not reflective of ongoing operations, such as gains/losses on the sale of businesses, restructuring expenses, a fair value inventory step-up charge and pension settlements to arrive at Adjusted EBITDA. Management believes that Adjusted EBITDA is useful as a performance indicator of ongoing operations. We believe that Adjusted EBITDA is also useful to some investors as an indicator of the strength and performance of the Company and its segments’ ongoing business operations and a way to evaluate and compare operating performance and value companies within our industry. The definition of Adjusted EBITDA used here may differ from that used by other companies.

Also set forth below is a reconciliation of the change in organic net sales to the comparable measure of net sales as determined in accordance with U.S. GAAP, which represents the year-over-year consistency in net sales after excluding the impact from acquisitions/divestitures and foreign currency translation. Refer to Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations for additional discussion of organic net sales.

The non-GAAP financial measures disclosed by the Company should not be considered a substitute for, or superior to, financial measures prepared in accordance with U.S. GAAP. The financial results prepared in accordance with U.S. GAAP and the reconciliations from these results should be carefully evaluated.

Refer to Management’s Discussion and Analysis for definition and further discussion on organic sales.

The following discussion and analysis should be read in conjunction with our Consolidated Financial Statements and related notes in this annual report. This discussion may contain forward-looking statements based upon current expectations that involve risks and uncertainties. Our actual results and the timing of selected events could differ materially from those anticipated in these forward-looking statements as a result of several factors, including those set forth under Item 1A, “Risk Factors” and elsewhere in this annual report.

2019 Overview

IDEX is an applied solutions company specializing in the manufacture of fluid and metering technologies, health and science technologies and fire, safety and other diversified products built to customers’ specifications. IDEX’s products are sold in niche markets across a wide range of industries throughout the world. Accordingly, IDEX’s businesses are affected by levels of industrial activity and economic conditions in the U.S. and in other countries where it does business and by the relationship of the U.S. dollar to other currencies. Levels of capacity utilization and capital spending in certain industries and overall industrial activity are important factors that influence the demand for IDEX’s products.

The Company has three reportable business segments: Fluid & Metering Technologies, Health & Science Technologies and Fire & Safety/Diversified Products. Within our three reportable segments, the Company maintains 13 platforms, where we focus on organic growth and strategic acquisitions. Each of our 13 platforms is also a reporting unit that we annually test goodwill for impairment.

The Fluid & Metering Technologies segment designs, produces and distributes positive displacement pumps, flow meters, injectors and other fluid-handling pump modules and systems and provides flow monitoring and other services for the food, chemical, general industrial, water and wastewater, agriculture and energy industries. The Fluid & Metering Technologies segment contains the Energy platform (comprised of Corken, Liquid Controls, SAMPI and Toptech), the Valves platform (comprised of Alfa Valvole, Richter and Aegis), the Water platform (comprised of Pulsafeeder, OBL, Knight, ADS, Trebor and iPEK), the Pumps platform (comprised of Viking and Warren Rupp) and the Agriculture platform (comprised of Banjo).

The Health & Science Technologies segment designs, produces and distributes a wide range of precision fluidics, rotary lobe pumps, centrifugal and positive displacement pumps, roll compaction and drying systems used in beverage, food processing, pharmaceutical and cosmetics, pneumatic components and sealing solutions, including very high precision, low-flow rate pumping solutions required in analytical instrumentation, clinical diagnostics and drug discovery, high performance molded and extruded sealing components, custom mechanical and shaft seals for a variety of end markets including food and beverage, marine, chemical, wastewater and water treatment, engineered hygienic mixers and valves for the global biopharmaceutical industry, biocompatible medical devices and implantables, air compressors used in medical, dental and industrial applications, optical components and coatings for applications in the fields of scientific research, defense, biotechnology, aerospace, telecommunications and electronics manufacturing, laboratory and commercial equipment used in the production of micro and nano scale materials, precision photonic solutions used in life sciences, research and defense markets and precision gear and peristaltic pump technologies that meet exacting original equipment manufacturer specifications. The Health & Science Technologies segment contains the Scientific Fluidics & Optics platform (comprised of Eastern Plastics, Rheodyne, Sapphire Engineering, Upchurch Scientific, ERC, CiDRA Precision Services, thinXXS, CVI Melles Griot, Semrock, Advanced Thin Films and FLI), the Sealing Solutions platform (comprised of Precision Polymer Engineering, FTL Seals Technology, Novotema, SFC Koenig and Velcora) the Gast platform, the Micropump platform and the Material Processing Technologies platform (comprised of Quadro, Fitzpatrick, Microfluidics and Matcon).

The Fire & Safety/Diversified Products segment designs, produces and develops firefighting pumps, valves and controls, rescue tools, lifting bags and other components and systems for the fire and rescue industry, engineered stainless steel banding and clamping devices used in a variety of industrial and commercial applications and precision equipment for dispensing, metering, and mixing colorants and paints used in a variety of retail and commercial businesses around the world. The Fire & Safety/Diversified Products segment is comprised of the Fire & Safety platform (comprised of Class 1, Hale, Akron Brass, AWG Fittings, Godiva, Dinglee, Hurst Jaws of Life, Lukas and Vetter), the Band-It platform and the Dispensing platform.

Our 2019 financial results were as follows:

Our 2019 financial results, adjusted for $21.0 million of restructuring expense and a $3.3 million fair value inventory step-up charge, compared to our 2018 financial results, adjusted for $12.1 million of restructuring expense, were as follows (these non-GAAP measures have been reconciled to U.S. GAAP measures in Item 6, “Selected Financial Data”):

Results of Operations

The following is a discussion and analysis of our results of operations for the year ended December 31, 2019 compared to the year ended December 31, 2018. For discussion related to the results of operations for the year ended December 31, 2018 compared to the year ended December 31, 2017, refer to Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in the Company’s annual report on Form 10-K for the year ended December 31, 2018, which was filed with the SEC on February 28, 2019. For purposes of this Item, reference is made to the Consolidated Statements of Operations in Part II, Item 8, “Financial Statements and Supplementary Data.” Segment operating income excludes unallocated corporate operating expenses. Management’s primary measurements of segment performance are sales, operating income and operating margin.

In the following discussion, and throughout this report, references to organic sales, a non-GAAP measure, refers to sales from continuing operations calculated according to U.S. GAAP but excludes (1) the impact of foreign currency translation and (2) sales from acquired or divested businesses during the first twelve months of ownership or divestiture. The portion of sales attributable to foreign currency translation is calculated as the difference between (a) the period-to-period change in organic sales and (b) the period-to-period change in organic sales after applying prior period foreign exchange rates to the current year period. Management believes that reporting organic sales provides useful information to investors by helping identify underlying growth trends in our business and facilitating easier comparisons of our revenue performance with prior and future periods and to our peers. The Company excludes the effect of foreign currency translation from organic sales because foreign currency translation is not under management’s control, is subject to volatility and can obscure underlying business trends. The Company excludes the effect of acquisitions and divestitures because they can obscure underlying business trends and make comparisons of long-term performance difficult due to the varying nature, size and number of transactions from period to period and between the Company and its peers.

Performance in 2019 Compared with 2018

Sales in 2019 were $2.5 billion, which was flat compared with last year. This reflects a 1% increase in organic sales and a 1% increase from acquisitions (Velcora - July 2019 and FLI - July 2018), offset by a 2% unfavorable impact from foreign currency translation. Sales to customers outside the U.S. represented approximately 50% of total sales in 2019 compared with 51% in 2018.

In 2019, Fluid & Metering Technologies contributed 38% of sales and 44% of total segment operating income; Health & Science Technologies contributed 37% of sales and 31% of total segment operating income; and Fire & Safety/Diversified Products contributed 25% of sales and 25% of total segment operating income.

Gross profit of $1.1 billion in 2019 increased $7.1 million, or 1%, from 2018, while gross margin increased 10 basis points to 45.1% in 2019 from 45.0% in 2018. The increase in gross profit and margin is primarily a due to price capture and productivity initiatives, partially offset by a fair value inventory step-up charge, inflation and higher engineering costs.

Selling, general and administrative (“SG&A”) expenses decreased to $525.0 million in 2019 from $536.7 million in 2018. The $11.7 million decrease is primarily due to lower variable compensation expenses and tighter cost controls in 2019 as well as a stamp duty charge in Switzerland in 2018. As a percentage of sales, SG&A expenses were 21.2% for 2019 and 21.6% for 2018.

In 2019 and 2018, the Company incurred pre-tax restructuring expenses totaling $21.0 million and $12.1 million, respectively, to facilitate long-term, sustainable growth through cost reduction actions, primarily consisting of employee reductions, facility

rationalization and impairment charges. The restructuring expenses included severance benefits of $9.8 million, exit costs of $1.1 million and impairment charges of $10.1 million. In the second quarter of 2019, the Company began to evaluate strategic alternatives for one of its businesses in the HST segment. Prior to making a final decision on the options that were presented for this business, the business was informed in the third quarter of 2019 of the loss of its largest customer. As a result,the Company accelerated its restructuring activities for this business and a decision was made to wind down the business over time, requiring a $9.7 million impairment charge. In addition, in the fourth quarter of 2019, the Company completed the consolidation of one of its facilities into the Optics Center of Excellence in Rochester, New York, which resulted in a $0.4 million impairment charge.

Operating income of $579.0 million in 2019 increased from $569.1 million in 2018, and operating margin of 23.2% in 2019 was up 30 basis points from 22.9% in 2018. Both operating income and operating margin increased compared to 2018 primarily due to price capture, productivity initiatives and tighter cost controls in 2019, partially offset by inflation and sales mix.

Other (income) expense - net changed by $5.7 million, from income of $4.0 million in 2018 to expense of $1.8 million in 2019 mainly due to foreign currency transaction gains in 2018 that did not repeat in 2019.

Interest expense increased to $44.3 million in 2019 from $44.1 million in 2018. The increase was primarily due to interest on debt assumed in the Velcora acquisition, which has been subsequently retired.

The provision for income taxes is based upon estimated annual tax rates for the year applied to federal, state and foreign income. The provision for income taxes decreased to $107.4 million in 2019 compared to $118.4 million in 2018. The effective tax rate decreased to 20.2% in 2019 compared to 22.4% in 2018 due to an increase in the excess tax benefits related to share-based compensation, a partial change in the assertion of permanent reinvestment of certain foreign tax earnings in 2018, and the mix of global pre-tax income among jurisdictions.

Net income for the year of $425.5 million increased from $410.6 million in 2018. Diluted earnings per share in 2019 of $5.56 increased $0.27 from $5.29 in 2018.

Fluid & Metering Technologies Segment

Sales of $957.0 million increased $5.5 million, or 1%, in 2019 compared with 2018. This increase reflected a 2% increase in organic sales, partially offset by a 1% unfavorable impact from foreign currency translation. In 2019, sales were flat domestically and up 1% internationally. Sales to customers outside the U.S. were approximately 43% of total segment sales in both 2019 and 2018.

Sales within our Valves platform increased compared to 2018 due to strength in the chemical end market. Sales within our Pumps platform increased compared to 2018 due to strength in the North American industrial market in the first half of the year and lease automated custody transfer (“LACT”) product growth. Sales within our Energy platform increased slightly compared to 2018 due to market demand stability, despite lower capital investment as a result of declines in fuel prices. Sales within our Water platform were flat compared to 2018 as municipal markets remained fairly consistent. Sales within our Agriculture platform decreased compared to 2018 due to challenging market conditions from geopolitical uncertainty and depressed commodity prices.

Operating income and operating margin of $285.3 million and 29.8%, respectively, were higher than the $275.1 million and 28.9%, respectively, recorded in 2018, primarily due to increased volume, price capture and productivity initiatives.

Health & Science Technologies Segment

Sales of $914.4 million increased $18.0 million, or 2%, in 2019 compared with 2018. This increase reflected a 1% increase in organic sales and a 2% increase from acquisitions (Velcora - July 2019 and FLI - July 2018), partially offset by a 1% unfavorable impact from foreign currency translation. In 2019, sales increased 5% domestically and were flat internationally. Sales to customers outside the U.S. were approximately 55% of total segment sales in 2019 compared with 56% in 2018.

Sales in our Gast platform increased compared to 2018 due to strong demand related to our targeted growth initiatives. Sales within our Scientific Fluidics & Optics platform increased compared to 2018 due to new product introductions and strong demand across our end markets primarily in vitro diagnostics (“IVD”) and biotechnology. Sales within our Sealing Solutions platform were flat compared to 2018 due to the Velcora acquisition, offset by weakness in the semiconductor and industrial markets. Sales within our Material Processing Technologies platform decreased compared to 2018 due to project timing. Sales within our Micropump platform decreased compared to 2018 due to end market demand volatility.

Operating income and operating margin of $200.2 million and 21.9%, respectively, in 2019 were down from $205.7 million and 22.9%, respectively, in 2018, primarily due to the impairment charges and the fair value inventory step-up charge, partially offset by price capture and tighter cost controls in 2019.

Fire & Safety/Diversified Products Segment

Sales of $626.8 million decreased $10.3 million, or 2%, in 2019 compared with 2018. This decrease reflected flat organic sales and a 2% unfavorable impact from foreign currency translation. In 2019, sales increased 2% domestically and decreased 5% internationally. Sales to customers outside the U.S. were approximately 52% of total segment sales in 2019 compared with 53% in 2018.

Sales within our Dispensing platform decreased compared to 2018 due to the timing of large projects in 2018 that did not reoccur in 2019. Sales in our Band-It platform increased compared to 2018 due to strength in transportation markets, partially offset by weakness in the industrial end market. Sales within our Fire & Safety platform increased compared to 2018 primarily due to OEM and distribution strength as well as strong demand for new product introductions.

Operating income of $165.3 million and operating margin of 26.4%, respectively, were lower than the $168.6 million and 26.5%, respectively, in 2018, primarily due to volume declines and sales mix in the Dispensing platform.

Liquidity and Capital Resources

Operating Activities

Cash flows from operating activities increased $48.7 million, or 10.2%, to $528.1 million in 2019, primarily due to higher earnings and favorable operating working capital, partially offset by lower income taxes payable and lower incentive compensation. At December 31, 2019, working capital was $903.6 million and the Company’s current ratio was 3.5 to 1. At December 31, 2019, the Company’s cash and cash equivalents totaled $632.6 million, of which $350.9 million was held outside of the United States.

Investing Activities

Cash flows used in investing activities increased $55.6 million to $137.0 million in 2019, primarily due to $87.2 million spent on the acquisition of Velcora in 2019 compared to $20.2 million spent on the acquisition of FLI in 2018, partially offset by lower capital expenditures in 2019 and $4.0 million spent on the purchase of intellectual property assets from Phantom in 2018.

Cash flows from operations were more than adequate to fund capital expenditures of $50.9 million and $56.1 million in 2019 and 2018, respectively. Capital expenditures were generally for machinery and equipment that supported growth, improved productivity, tooling, business system technology, replacement of equipment and investments in new facilities. Management believes that the Company has ample capacity in its plants and equipment to meet demand increases for future growth in the intermediate term.

Financing Activities

Cash flows used in financing activities decreased $62.4 million to $227.6 million in 2019, primarily as a result of lower share repurchases in 2019, partially offset by higher debt repayments due to the repayment of debt assumed in the Velcora acquisition and higher dividends paid in 2019.

On June 13, 2016, the Company completed a private placement of a $100 million aggregate principal amount of 3.20% Senior Notes due June 13, 2023 and a $100 million aggregate principal amount of 3.37% Senior Notes due June 13, 2025 (collectively, the “Notes”) pursuant to a Note Purchase Agreement, dated June 13, 2016 (the “Purchase Agreement”). Each series of Notes bears interest at the stated amount per annum, which is payable semi-annually in arrears on each June 13th and December 13th. The Notes are unsecured obligations of the Company and rank pari passu in right of payment with all of the Company’s other unsecured, unsubordinated debt. The Company may at any time prepay all, or any portion of the Notes; provided that such portion is greater than 5% of the aggregate principal amount of the Notes then outstanding. In the event of a prepayment, the Company will pay an amount equal to par plus accrued interest plus a make-whole amount. In addition, the Company may repurchase the Notes by making an offer to all holders of the Notes, subject to certain conditions.

On May 31, 2019, the Company entered into a credit agreement (the “Credit Agreement”) along with certain of its subsidiaries, as borrowers (the “Borrowers”), Bank of America, N.A., as administrative agent, swing line lender and an issuer of letters of credit, with other agents party thereto. The Credit Agreement consists of a revolving credit facility (the “Revolving Facility”), which is an $800.0 million unsecured, multi-currency bank credit facility expiring on May 30, 2024. The Credit Agreement replaced the Company’s prior five-year, $700 million credit agreement, dated as of June 23, 2015, which was due to expire in June 2020. At December 31, 2019, there was no balance outstanding under the Revolving Facility and $8.5 million of outstanding letters of credit, resulting in a net available borrowing capacity under the Revolving Facility of $791.5 million.

Borrowings under the Revolving Facility bear interest, at either an alternate base rate or adjusted LIBOR plus, in each case, an applicable margin. Such applicable margin is based on the better of the Company’s senior, unsecured, long-term debt rating or the Company’s applicable leverage ratio. Interest is payable (a) in the case of base rate loans, quarterly, and (b) in the case of LIBOR loans, on the last day of the applicable interest period selected, or every three months from the effective date of such interest period for interest periods exceeding three months. The Company may request increases in the lending commitments under the Credit Agreement, but the aggregate lending commitments pursuant to such increases may not exceed $400 million.

The Company has the right, subject to certain conditions set forth in the Credit Agreement, to designate certain foreign

subsidiaries of the Company as borrowers under the Credit Agreement. In connection with any such designation, the Company is required to guarantee the obligations of any such subsidiaries under the Credit Agreement.

On December 9, 2011, the Company completed a public offering of $350.0 million 4.2% senior notes due December 15, 2021 (“4.2% Senior Notes”). The net proceeds from the offering of $346.2 million, after deducting a $0.9 million issuance discount, a $2.3 million underwriting commission and $0.6 million of offering expenses, were used to repay $306.0 million of outstanding bank indebtedness, with the balance used for general corporate purposes. The 4.2% Senior Notes bear interest at a rate of 4.2% per annum, which is payable semi-annually in arrears on each June 15 and December 15. The Company may redeem all or part of the 4.2% Senior Notes at any time prior to maturity at the redemption prices set forth in the Note Indenture governing the 4.2% Senior Notes. The Company may issue additional debt from time to time pursuant to the Indenture. The Indenture and 4.2% Senior Notes contain covenants that limit the Company’s ability to, among other things, incur certain liens securing indebtedness, engage in certain sale-leaseback transactions, and enter into certain consolidations, mergers, conveyances, transfers or leases of all or substantially all of the Company’s assets. The terms of the 4.2% Senior Notes also require the Company to make an offer to repurchase the 4.2% Senior Notes upon a change of control triggering event (as defined in the Indenture) at a price equal to 101% of their principal amount plus accrued and unpaid interest, if any.

On December 6, 2010, the Company completed a public offering of $300.0 million 4.5% senior notes due December 15, 2020 (“4.5% Senior Notes”). The net proceeds from the offering of $295.7 million, after deducting a $1.6 million issuance discount, a $1.9 million underwriting commission and $0.8 million of offering expenses, were used to repay $250.0 million of outstanding bank indebtedness, with the balance used for general corporate purposes. The 4.5% Senior Notes bear interest at a rate of 4.5% per annum, which is payable semi-annually in arrears on each June 15 and December 15. The Company may redeem all or a portion of the 4.5% Senior Notes at any time prior to maturity at the redemption prices set forth in the Note Indenture governing the 4.5% Senior Notes. The Company may issue additional debt from time to time pursuant to the Indenture. The Indenture and 4.5% Senior Notes contain covenants that limit the Company’s ability to, among other things, incur certain liens securing indebtedness, engage in certain sale-leaseback transactions, and enter into certain consolidations, mergers, conveyances, transfers or leases of all or substantially all of the Company’s assets. The terms of the 4.5% Senior Notes also require the Company to make

an offer to repurchase the 4.5% Senior Notes upon a change of control triggering event (as defined in the Indenture) at a price equal to 101% of their principal amount plus accrued and unpaid interest, if any.

There are two key financial covenants that the Company is required to maintain in connection with the Revolving Facility and the Notes, a minimum interest coverage ratio of 3.0 to 1 and a maximum leverage ratio of 3.50 to 1. In the case of the leverage ratio, there is an option to increase the ratio to 4.00 for 12 months in connection with certain acquisitions. At December 31, 2019, the Company was in compliance with both of these financial covenants, as the Company’s interest coverage ratio was 16.04 to 1 and the leverage ratio was 1.23 to 1. There are no financial covenants relating to the 4.5% Senior Notes or 4.2% Senior Notes; however, both are subject to cross-default provisions.

On December 1, 2015 the Company’s Board of Directors approved an increase of $300.0 million in the authorized level for repurchases of common stock. This followed the prior Board of Directors approved repurchase authorization of $400.0 million that was announced by the Company on November 6, 2014. Repurchases under the program will be funded with future cash flow generation or borrowings available under the Revolving Facility. During 2019, the Company repurchased a total of 389 thousand shares at a cost of $54.7 million compared to 1.3 million shares repurchased in 2018 at a cost of $173.9 million. As of December 31, 2019, the amount of share repurchase authorization remaining is $322.3 million.

The Company believes current cash, cash from operations and cash available under the Revolving Facility will be sufficient to meet its operating cash requirements, planned capital expenditures, interest and principal payments on all borrowings, pension and postretirement funding requirements, authorized share repurchases and annual dividend payments to holders of the Company’s common stock for the next twelve months. Additionally, in the event that suitable businesses are available for acquisition upon acceptable terms, the Company may obtain all or a portion of the financing for these acquisitions through the incurrence of additional borrowings. As of December 31, 2019, there was no balance outstanding under the Revolving Facility and $8.5 million of outstanding letters of credit, resulting in a net available borrowing capacity under the Revolving Facility at December 31, 2019 of approximately $791.5 million.

Contractual Obligations

Our contractual obligations include pension and postretirement medical benefit plans, rental payments under operating leases, payments under capital leases and other long-term obligations arising in the ordinary course of business. There are no identifiable events or uncertainties, including the lowering of our credit rating, which would accelerate payment or maturity of any of these commitments or obligations.

The following table summarizes our significant contractual obligations and commercial commitments at December 31, 2019 and the future periods in which such obligations are expected to be settled in cash. In addition, the table reflects the timing of principal and interest payments on outstanding borrowings. Additional detail regarding these obligations is provided in the Notes to Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data.”

Critical Accounting Policies and Estimates

We believe that the application of the following accounting policies, which are important to our financial position and results of operations, require significant judgments and estimates on the part of management. For a summary of all of our accounting policies, including the accounting policies discussed below, see Note 1 of the Notes to Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data.”

Revenue recognition — Revenue is recognized when control of products or services is transferred to our customers in an amount that reflects the consideration we expect to be entitled to in exchange for transferring those products or providing those services. A performance obligation is a promise in a contract to transfer a distinct product or service to the customer. A contract’s transaction price is allocated to each performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. Our performance obligations are satisfied at a point in time or over time as work progresses. Revenue from products and services transferred to customers at a point in time is recognized when obligations under the terms of the contract with our customer are satisfied. Generally, this occurs with the transfer of control of the asset, which is in line with shipping terms. Certain units recognize revenue over time because control transfers continuously to our customers. Revenue is recognized over time as work is performed based on the relationship between actual costs incurred to date for each contract and the total estimated costs for such contract at completion of the performance obligation (i.e. the cost-to-cost method) or is recognized ratably over the contract term. As a significant change in one or more of these estimates could affect the profitability of our contracts, we review and update our estimates regularly. Due to uncertainties inherent in the estimation process, it is reasonably possible that completion costs will be revised. Such revisions to costs and income are recognized in the period in which the revisions are determined as a cumulative catch-up adjustment. The impact of the adjustment on profit recorded to date on a contract is recognized in the period the adjustment is identified. If at any time the estimate of contract profitability indicates an anticipated loss on the contract, we recognize provisions for estimated losses on uncompleted contracts in the period in which such losses are determined.

The Company records allowances for discounts and product returns at the time of sale as a reduction of revenue as such allowances can be reliably estimated based on historical experience and known trends. The Company also offers product warranties (primarily assurance-type) and accrues its estimated exposure for warranty claims at the time of sale based upon the length of the warranty period, warranty costs incurred and any other related information known to the Company.

Goodwill, long-lived and intangible assets — The Company evaluates the recoverability of certain noncurrent assets utilizing various estimation processes. An impairment of a long-lived asset exists when the asset’s carrying amount exceeds its fair value and is recorded when the carrying amount is not recoverable through future operations. An impairment of an indefinite-lived intangible asset or goodwill exists when the carrying amount of the intangible asset or goodwill exceeds its fair value. Assessments of possible impairments of long-lived or indefinite-lived intangible assets or goodwill are made if an event occurs or circumstances change that would more likely than not reduce the fair value of a reporting unit below its carrying amount. Additionally, testing for possible impairments of recorded indefinite-lived intangible asset balances and goodwill is performed annually. On October 31, or more frequently if triggering events occur, the Company compares the fair value of each reporting unit to the carrying amount of each reporting unit to determine if a goodwill impairment exists. The amount and timing of impairment charges for these assets require the estimation of future cash flows to determine the fair value of the related assets. In the second quarter of 2019, the Company began to evaluate strategic alternatives for one of its businesses in the HST segment. Prior to making a final decision on the options that were presented for this business, the business was informed in the third quarter of 2019 of the loss of its largest customer. As a result, the Company accelerated its restructuring activities for this business and a decision was made to wind down the business over time. This event required an interim impairment test be performed on the long-lived tangible assets of the business, which resulted in an impairment charge of $9.7 million, consisting of $6.1 million related to a customer relationships intangible asset, $1.0 million related to an unpatented technology intangible asset, $2.0 million related to property, plant and equipment and $0.6 million related to a building right-of-use asset. In the fourth quarter of 2019, the Company completed the consolidation of one of its facilities into the Optics Center of Excellence in Rochester, New York, which resulted in an impairment charge of $0.4 million related to a building right-of-use asset. These charges were recorded as Restructuring expense in the Consolidated Statements of Operations. In 2018, there were no events that occurred or circumstances that changed that would have required a review other than as of our annual test date and the Company concluded that there were no long-lived assets with a fair value that was less than the carrying value.

The Company’s business acquisitions result in recording goodwill and other intangible assets, which affect the amount of amortization expense and possible impairment expense that the Company will incur in future periods. The Company follows the guidance prescribed in ASC 350, Goodwill and Other Intangible Assets, to test goodwill and intangible assets for impairment. The Company determines the fair value of each reporting unit utilizing an income approach (discounted cash flows) weighted 50% and a market approach (consisting of a comparable public company multiples methodology) weighted 50%. To determine the reasonableness of the calculated fair values, the Company reviews the assumptions to ensure that neither the income approach nor the market approach yielded significantly different valuations.

The key assumptions are updated every year for each reporting unit for the income and market approaches used to determine fair value. Various assumptions are utilized including forecasted operating results, annual operating plans, strategic plans, economic projections, anticipated future cash flows, the weighted average cost of capital, market data and market multiples. The assumptions that have the most significant effect on the fair value calculations are the weighted average cost of capital, market multiples, forecasted EBITDA and terminal growth rates. The 2019 and 2018 ranges for these three assumptions utilized by the Company are as follows:

In assessing the fair value of the reporting units, the Company considers both the market approach and the income approach. Under the market approach, the fair value of the reporting unit is determined by the respective trailing twelve month EBITDA and the forward looking 2020 EBITDA (50% each), based on multiples of comparable public companies. The market approach is dependent on a number of significant management assumptions including forecasted EBITDA and selected market multiples. Under the income approach, the fair value of the reporting unit is determined based on the present value of estimated future cash flows. The income approach is dependent on a number of significant management assumptions including estimates of operating results, capital expenditures, net working capital requirements, long-term growth rates and discount rates. Weighting was equally attributed to both the market and income approaches (50% each) in arriving at the fair value of the reporting units.

The Banjo trade name and the Akron Brass trade name are indefinite-lived intangible assets which are tested for impairment on an annual basis in accordance with ASC 350 or more frequently if events or changes in circumstances indicate that the assets might be impaired. The Company uses the relief-from-royalty method, a form of the income approach, to determine the fair value of these trade names. The relief-from-royalty method is dependent on a number of significant management assumptions, including estimates of revenues, royalty rates and discount rates.

Defined benefit retirement plans — The plan obligations and related assets of the defined benefit retirement plans are presented in Note 17 of the Notes to Consolidated Financial Statements in Part II, Item 8, “Financial Statements and Supplementary Data.” Level 1 assets are valued using unadjusted quoted prices for identical assets in active markets. Level 2 assets are valued using quoted prices or other observable inputs for similar assets. Level 3 assets are valued using unobservable inputs, but reflect the assumptions market participants would use in pricing the assets. Plan obligations and the annual pension expense are determined after consulting with actuaries on a number of key assumptions and on information provided by the Company. Key assumptions in the determination of the annual pension expense include the discount rate, the rate of salary increases and the estimated future return on plan assets. To the extent actual amounts differ from these assumptions and estimated amounts, results could be adversely affected.

The Society of Actuaries releases annual updates to mortality tables, which update life expectancy assumptions. IDEX adopts these annual updates and, in consideration of these tables, we modified the mortality assumptions used in determining our pension and post-retirement benefit obligations as of December 31, 2019, which will have a related impact on our annual benefit expense in future years. New mortality tables may result in additional funding requirements dependent upon the funded status of our plans. These expectations presume all other assumptions remain constant and there are no changes to applicable funding regulations.

Changes in the discount rate assumptions will impact the (gain) loss amortization and interest cost components of the projected benefit obligation (“PBO”), which in turn, may impact the Company’s funding decisions if the PBO exceeds plan assets. Each 100 basis point increase in the discount rate will cause a corresponding decrease in the PBO of approximately $25 million based upon the December 31, 2019 data. Each 100 basis point decrease in the discount rate will cause a corresponding increase in the PBO of approximately $31 million based upon the December 31, 2019 data.

The Company is subject to market risk associated with changes in foreign currency exchange rates and interest rates. The Company may, from time to time, enter into foreign currency forward contracts and interest rate swaps on its debt when it believes there is a financial advantage in doing so. A treasury risk management policy, adopted by the Board of Directors, describes the procedures and controls over derivative financial and commodity instruments, including foreign currency forward contracts and interest rate swaps. Under the policy, the Company does not use financial or commodity derivative instruments for trading purposes,

and the use of these instruments is subject to strict approvals by senior officers. Typically, the use of derivative instruments is limited to foreign currency forward contracts and interest rate swaps on the Company’s outstanding long-term debt. As of December 31, 2019, the Company did not have any derivative instruments outstanding.

Foreign Currency Exchange Rates

The Company’s foreign currency exchange rate risk is limited principally to the Euro, Swiss Franc, British Pound, Canadian Dollar, Indian Rupee, Chinese Renminbi and Swedish Krona. The Company manages its foreign exchange risk principally through invoicing customers in the same currency as the source of products. The foreign currency transaction losses (gains) for the periods ending December 31, 2019, 2018 and 2017 were $3.3 million, $(2.4) million and $20.5 million, respectively, and are reported within Other (income) expense - net on the Consolidated Statements of Operations. Of the $20.5 million reported as foreign currency transaction losses for the period ending December 31, 2017, $20.2 million was due to intercompany loans established in conjunction with the SFC Koenig acquisition. See Note 7 in Part II, Item 8, “Financial Statements and Supplementary Data,” for further discussion.

Interest Rate Fluctuations

The Company does not have significant interest rate exposure due to substantially all of the $850,622 of debt outstanding as of December 31, 2019 being fixed rate debt.

MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING

Our management is responsible for establishing and maintaining adequate internal control over financial reporting. Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America, and as defined in Exchange Act Rule 13a-15(f).

Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting.

Management has used the framework set forth in the report entitled “Internal Control — Integrated Framework” (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission to assess the effectiveness of the Company’s internal control over financial reporting. Based on that assessment, management has concluded that the Company’s internal control over financial reporting was effective as of December 31, 2019.

The effectiveness of the Company’s internal control over financial reporting as of December 31, 2019, has been audited by Deloitte & Touche LLP, an independent registered public accounting firm, as stated in their report which appears herein.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of IDEX Corporation

Opinion on Internal Control over Financial Reporting

We have audited the internal control over financial reporting of IDEX Corporation and subsidiaries (the “Company”) as of December 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). In our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by COSO.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the consolidated financial statements as of and for the year ended December 31, 2019, of the Company and our report dated February 21, 2020, expressed an unqualified opinion on those financial statements.

Basis for Opinion

The Company’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audit in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

Definition and Limitations of Internal Control over Financial Reporting

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the shareholders and the Board of Directors of IDEX Corporation

Opinion on the Financial Statements

We have audited the accompanying consolidated balance sheets of IDEX Corporation and subsidiaries (the "Company") as of December 31, 2019 and 2018, the related consolidated statements of operations, comprehensive income, shareholders’ equity, and cash flows, for each of the three years in the period ended December 31, 2019, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2019, in conformity with accounting principles generally accepted in the United States of America.

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of December 31, 2019, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 21, 2020, expressed an unqualified opinion on the Company's internal control over financial reporting.

Basis for Opinion

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or f

Showing the first 8K of 201K characters. Open the full section

None.

The Company maintains disclosure controls and procedures that are designed to ensure that information required to be disclosed in the Company’s Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure.

As required by SEC Rule 13a-15(b), the Company carried out an evaluation, under the supervision and with the participation of the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures as of the end of the period covered by this report. Based on the foregoing, the Company’s Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures were effective as of December 31, 2019.

Management’s Report on Internal Control Over Financial Reporting appearing on page 34 of this report is incorporated into this Item 9A by reference.

There has been no change in the Company’s internal control over financial reporting during the Company’s most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

None.

PART III

Information under the headings “Election of Directors”; “Board Committees”;”Delinquent Section 16(a) Reports”; and “Corporate Governance” in the 2020 Proxy Statement is incorporated into this Item 10 by reference. Information regarding executive officers of the Company is located in Part I, Item 1, of this report under the caption “Information about Our Executive Officers.”

The Company has adopted a Code of Business Conduct and Ethics applicable to the Company’s directors, officers (including the Company’s principal executive officer, principal financial officer and principal accounting officer) and employees. The Code of Business Conduct and Ethics, along with the Audit Committee Charter, Nominating and Corporate Governance Committee Charter, Compensation Committee Charter and Corporate Governance Guidelines are available on the Company’s website at www.idexcorp.com under “Investor Relations.” In the event we amend or waive any of the provisions of the Code of Business Conduct and Ethics applicable to our principal executive officer, principal financial officer or principal accounting officer, we intend to disclose the same on the Company’s website.

Information under the heading “Executive Compensation” in the 2020 Proxy Statement is incorporated into this Item 11 by reference.

Information under the heading “Security Ownership” in the 2020 Proxy Statement is incorporated into this Item 12 by reference.

Equity Compensation Plan Information

Information with respect to the Company’s equity compensation plans as of December 31, 2019 is as follows:

Information under the headings, “Corporate Governance” and “Board Committees” in the 2020 Proxy Statement is incorporated into this Item 13 by reference.

Information under the heading “Principal Accountant Fees and Services” in the 2020 Proxy Statement is incorporated into this Item 14 by reference.

PART IV

Consolidated financial statements filed as part of this report are listed under Part II. Item 8. “Financial Statements and Supplementary Data.”

2. Financial Statement Schedules

Financial statement schedules are omitted because they are not applicable, not required, or because the required information is included in the Consolidated Financial Statements of the Company or the Notes thereto.

3. Exhibits

The exhibits filed with this report are listed on the “Exhibit Index.”

The information required by this item is set forth on the “Exhibit Index” which precedes the signature page of this report.

None.