A Dark Vector Cognition product

Jabil 2026 10-K Annual Report

JBL · CIK 898293 · Form 10-K · Fiscal year ended August 31, 2026 · Filed October 23, 2026

Revenue rose 20.6% to $36.0 billion. Operating margin was 4.7%, against 4.0% the year before. Net income was $1.04 billion.

23 sections, 458K characters. Original on sec.gov · ·

Risk FactorsBusinessMD&AFinancial StatementsWhat changed vs 2025

Key numbers
MeasureYear ended Aug 31, 2026Year ended Aug 31, 2025Change
Revenue$36.0B$29.8B+20.6%
Operating income$1.70B$1.18B+44.2%
Net income$1.04B$657M+58.6%
Diluted EPS$9.75$5.92+64.7%
Free cash flow*$1.37B$1.17B+17.2%
Cash and equivalents$1.74B$1.93B-10.0%
Operating margin*4.7%4.0%+0.8 pts

From the XBRL facts tagged to this filing; both columns are as reported in this filing. * Computed by filings.tools: free cash flow is operating cash flow less capital spending; operating margin is operating income over revenue.

The 104 tables in this filing as one CSV, figures in aligned columns. For subscribers: paste your API key. One API call. Plans from $19 a month, see pricing.

Cover and table of contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

☒ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended August 31, 2026

or

☐TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to

Commission file number 001-14063

jabillogo23.jpg

JABIL INC.

(Exact name of registrant as specified in its charter)

Delaware38-1886260
(State or other jurisdiction of incorporation or organization)(I.R.S. Employer Identification No.)

10800 Roosevelt Boulevard North, St. Petersburg, Florida 33716

(Address of principal executive offices) (Zip Code)

(727) 577-9749

Registrant’s telephone number, including area code

Securities registered pursuant to Section 12(b) of the Act:

Title of each classTrading Symbol(s)Name of each exchange on which registered
Common Stock, $0.001 par value per shareJBLNew York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

Large accelerated filer☒Accelerated filer☐
Non-accelerated filer☐Smaller reporting company☐
Emerging growth company☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate market value of the voting common stock held by non-affiliates of the registrant based on the closing sale price of the Common Stock as reported on the New York Stock Exchange on February 28, 2026, was approximately $24.0 billion. For purposes of this determination, shares of Common Stock held by each officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes. The number of outstanding shares of the registrant’s Common Stock as of the close of business on October 20, 2026, was 102,974,470. The registrant does not have any non-voting stock outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

We have incorporated by reference portions of our Proxy Statement for our annual meeting of shareholders expected to be held on January 21, 2027, into Part III hereof, to the extent indicated herein.

JABIL INC. AND SUBSIDIARIES

2026 FORM 10-K ANNUAL REPORT

TABLE OF CONTENTS

Part I.
Item 1.Business2
Item 1A.Risk Factors12
Item 1B.Unresolved Staff Comments26
Item 1C.Cybersecurity26
Item 2.Properties28
Item 3.Legal Proceedings28
Item 4.Mine Safety Disclosures28
Part II.
Item 5.Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities29
Item 6.[Reserved]30
Item 7.Management’s Discussion and Analysis of Financial Condition and Results of Operations31
Item 7A.Quantitative and Qualitative Disclosures About Market Risk47
Item 8.Financial Statements and Supplementary Data47
Item 9.Changes in and Disagreements With Accountants on Accounting and Financial Disclosure47
Item 9A.Controls and Procedures48
Item 9B.Other Information48
Part III.
Item 10.Directors, Executive Officers and Corporate Governance49
Item 11.Executive Compensation49
Item 12.Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters49
Item 13.Certain Relationships and Related Transactions, and Director Independence49
Item 14.Principal Accounting Fees and Services49
Part IV.
Item 15.Exhibits and Financial Statement Schedules50
Item 16.Form 10-K Summary95
Signatures96

This Annual Report on Form 10-K (“Form 10-K”) contains forward-looking statements, within the meaning of the Private Securities Litigation Reform Act of 1995, that involve risks and uncertainties. Many of the forward-looking statements are located in Part II, Item 7 of this Form 10-K under the heading “Management’s Discussion and Analysis of Financial Condition and Results of Operations.” Forward-looking statements provide current expectations of future events based on certain assumptions and include any statement that does not directly relate to any historical or current fact. Forward-looking statements can also be identified by words such as “future,” “anticipates,” “believes,” “estimates,” “expects,” “intends,” “plans,” “predicts,” “will,” “would,” “should,” “could,” “can,” “may,” and similar terms. Forward-looking statements are not guarantees of future performance and the Company’s actual results may differ significantly from the results discussed in the forward-looking statements. Achievement of anticipated results is subject to substantial risks, uncertainties and inaccurate assumptions. Should these risks or uncertainties materialize, or should underlying assumptions prove inaccurate, actual results could vary materially from past results and those anticipated, estimated or projected. You should bear this in mind as you consider forward-looking statements, and you are cautioned not to put undue reliance on forward-looking statements. We undertake no obligation to publicly update forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law or by the rules and regulations of the SEC. You are advised, however, to consult any further disclosures we make on related subjects. Factors that might cause such differences include, but are not limited to, those discussed in Part I, Item 1A of this Form 10-K under the heading “Risk Factors,” which are incorporated herein by reference. References in this report to “the Company,” “Jabil,” “we,” “our,” or “us” mean Jabil Inc. together with its consolidated subsidiaries, except where the context otherwise requires.

PART I

Item 1. Business

The Company

Jabil is one of the leading providers of engineering, supply chain, and manufacturing solutions. We deliver comprehensive design, production, and product management services to companies across a diverse range of industries and end markets. Our capabilities span the entire product lifecycle—from innovation, design, and planning to fabrication, assembly, delivery, and post-production—enabling seamless management of resources and materials across global supply chains. Through these integrated services, we help our customers reduce manufacturing costs, enhance supply chain efficiency, minimize inventory risk, lower transportation expenses, and accelerate product fulfillment.

We serve our customers primarily through dedicated business units that combine highly automated, continuous flow manufacturing with advanced electronic design and design for manufacturability. Each business unit team serves as a single point of contact between a customer and Jabil. Business unit teams are supported by cross-functional teams, which leverage the power of our global expertise and capabilities to carry out work at the site level.

We conduct our operations in facilities that are located worldwide, including but not limited to China, Malaysia, Mexico, and the United States. Our global production sites allow customers to manufacture products simultaneously in the optimal locations for their products. Our global presence is key to assessing and executing on our business opportunities. For the fiscal year ended August 31, 2026, we had net revenues of $36.0 billion and net income attributable to Jabil Inc. of $1.0 billion.

We operate our business in the following three segments: Regulated Industries, Intelligent Infrastructure, and Connected Living and Digital Commerce, which are also the Company’s reportable segments. Our Regulated Industries segment is focused on regulated markets and includes revenues from customers primarily in the automotive and transportation, healthcare and packaging, and renewable and energy infrastructure industries. Our Intelligent Infrastructure segment is focused on the modern digital ecosystem including artificial intelligence (“AI”) infrastructure and includes revenues from customers primarily in the capital equipment, cloud and data center infrastructure, and networking and communications industries. Our Connected Living and Digital Commerce segment is focused on digitalization and automation, including warehouse automation and robotics, and includes revenues from customers primarily in the connected living and digital commerce industries.

Beginning September 1, 2026, our Connected Living and Digital Commerce segment was renamed to Intelligent Devices and Robotics to better reflect the evolution of the business, including our increased emphasis on automation and robotic capabilities and a strategic shift towards more highly complex, engineered solutions. Our Intelligent Devices and Robotics segment is focused on digitalization and automation, including warehouse automation and robotics, and includes revenues from customers primarily in the connected living and digital commerce and robotics industries. The name change did not impact the composition of the Company's reportable segments or the financial information reported for those segments.

Additional financial information regarding our reportable operating segments is included in Item 7 of this report and Note 13 – “Concentration of Risk and Segment Data” to the Consolidated Financial Statements.

Industry Background

Our industry was historically composed of companies that provide a range of design and manufacturing services to companies that utilize electronics components in their products. The industry subsequently expanded to include customers that require products and services beyond electronic components, including plastics and metal components, packaging, and injection molding.

We monitor the current economic environment and its potential impact on both the customers we serve as well as our end-markets; we closely manage our costs and capital resources so that we can respond appropriately as circumstances change. Over the long term we believe the factors driving our customers and potential customers to use our industry’s services include:

  • Efficient Manufacturing.** Manufacturing solutions providers are often able to manufacture products at a reduced total cost to companies. These cost advantages result from higher utilization of capacity and efficiencies of scale because of diversified product demand and, generally, a greater focus on the components of manufacturing cost. Companies are increasingly seeking to reduce their investment in inventory, facilities, and equipment used in manufacturing and prioritizing capital investments in other activities, such as sales and marketing and research and development (“R&D”). This strategic shift in capital deployment has contributed to increased demand for and interest in outsourcing to external manufacturing service providers.

  • Accelerated Product Time-to-Market and Time-to-Volume.** Manufacturing solutions providers are often able to deliver accelerated production start-ups and achieve high efficiencies in bringing new products to production. Providers are also able to more rapidly scale production for changing markets and to position themselves in global locations that serve the leading world markets. With increasingly shorter product life cycles, these key services allow new products to be sold in the marketplace in an accelerated time frame.

  • Access to Advanced Design and Manufacturing Technologies.** By utilizing manufacturing solutions providers, customers gain access to additional advanced technologies in manufacturing processes, as well as to product and production design, which can offer customers significant improvements in the performance, quality, cost, time-to-market, and manufacturability of their products.

  • Improved Inventory Management and Purchasing Power.** Manufacturing solutions providers are often able to more efficiently manage both procurement and inventory. Providers have demonstrated proficiency in purchasing components at improved pricing due to the scale of their operations and continuous interaction with the materials marketplace.

  • Global Reach and Regional Manufacturing.** Manufacturing solutions providers operate globally and are often able to more efficiently transition the location of manufacturing processes for products in response to changing macroeconomic and geopolitical environments relying on installed footprints, local teams, and consistent processes.

Our Strategy

Our vision is to be the world’s most technologically advanced and trusted manufacturing solutions provider. As we work to achieve our vision, we pursue the following strategies:

  • Establish and Maintain Long-Term Customer Relationships.** An important element of our strategy is to develop and bolster long-term relationships with leading companies in expanding industries that benefit from global, highly automated, continuous-flow manufacturing. We grow these partnerships across product lines and services to create deeper, more integrated value. In addition, we pursue relationships with new customers that meet our targeted profile: financially stable, technology-driven, growth-oriented, and committed to long-term collaboration.

  • Diversification.** We maintain a diversified portfolio of customers, end markets, technologies and product programs across a broad range of industries. We provide manufacturing, supply chain management, electronics design and product management services for customers in markets such as cloud and data center infrastructure, healthcare, energy and renewable infrastructure, automotive and transportation, warehouse automation, networking and communications, and semi-capital equipment. Our diverse customer and end-market base, together with the breadth of products and solutions we manufacture and support on behalf of our customers, help reduce our exposure to any single industry, customer or product category. We continue to support the resilience and long-term growth of our business by evaluating opportunities to expand and balance our portfolio as customer demand, end markets and technologies evolve.

  • Utilize Customer-Centric Business Units.** Most of our business units serve a single customer, using dedicated production equipment, workers, supervisors, buyers, planners, and engineers to provide comprehensive, customized manufacturing solutions. We believe our customer-centric business units promote increased responsiveness, particularly for relationships that extend across multiple production locations.

  • Leverage Global Production.** We believe that global production reduces obsolescence risk, lowers landed costs, and promotes consistent quality worldwide. Consistent with this strategy, we have established or acquired operations in the Americas, Europe and Asia. Our extensive global footprint allows us to select production locations that best serve customer needs. We believe that our global footprint is strengthened by our centralized procurement process, which, when coupled with our single Enterprise Resource Planning system, provides our customers visibility throughout the supply chain. Increasingly, our customers also prefer manufacturing to be located closer to their end markets. To meet this need, we invest in local-for-local and local-for-regional capabilities that improve resilience, reduce lead times, enhance sustainability, and enable us to support customers directly where they operate.

  • Expand Value-Added Services.** Our systems assembly, direct-order fulfillment, and configure-to-order services allow customers to reduce product cost and obsolescence risk by lowering total work-in-process and finished goods inventory. These services are available at all of our manufacturing locations.

  • Deliver Design Expertise.** We offer a wide spectrum of value-add design services focused on improving performance, reducing costs, accelerating time-to-market, and enhancing manufacturability. Our design expertise also helps customers navigate technology transitions and regulatory requirements, creating full-lifecycle solutions that integrate seamlessly from concept through production.

  • Pursue Strategic Acquisitions.** Our acquisition strategy complements current capabilities, diversifies us into new industry sectors and customers, and expands the scope of services we offer.

Our Approach to Manufacturing

To achieve high levels of manufacturing performance, we have adopted the following approaches:

  • Decentralized Customer Engagement Model.** Most of our business units serve a single customer and are empowered to tailor strategies to that customer’s needs. Our business units generally have dedicated production lines consisting of equipment, production workers, supervisors, buyers, planners, and engineers. Under certain circumstances, a production line may serve more than one business unit to maximize resource utilization. Business units have direct responsibility for manufacturing results and time-to-volume production, thereby promoting accountability and ownership. Our customer engagement approach is modular and enables us to grow incrementally without disrupting the operations of other business units. Business unit management reviews customer-specific financial performance to assess whether the business units are meeting their designated responsibilities and to ensure that the daily execution of manufacturing activities remains on track. The business units aggregate into operating segments based on the end markets they serve.

  • Automated Continuous Flow.** We use a highly automated, continuous flow approach to manufacturing, whereby different pieces of equipment are joined directly or by conveyor to create an in-line assembly process. This process contrasts with a batch approach, in which equipment operates as standalone work-centers. The elimination of waiting time prior to sequential operations results in faster manufacturing, improved efficiency, tighter quality control, and reduced work-in-process inventory. We believe continuous flow manufacturing provides cost reductions and quality improvement when applied to high volumes of product. Additionally, wherever possible, we automate repetitive or time-intensive tasks to enable employees to take on more creative, value-added work.

  • Computerized Control and Monitoring.** We support all aspects of our manufacturing activities with advanced computerized control and monitoring systems. Component inspection and vendor quality are monitored electronically in real-time. Materials planning, purchasing, stockroom, and shop floor control systems run on a computerized manufacturing resource planning system.

  • Electronic Supply Chain Management.** We make available to our customers and suppliers an electronic commerce system/electronic data interchange and cloud-based tools to implement a variety of supply chain management programs. Our customers use these tools to share demand and product forecasts and deliver purchase orders, and we use these tools with our suppliers for just-in-time delivery, supplier-managed inventory, and consigned supplier-managed inventory. These capabilities include procurement intelligence platforms and AI-driven orchestration systems that deliver real-time data insights to support cost management, inventory optimization, and risk mitigation across global supply networks. These digital tools improve visibility, responsiveness, and collaboration across the supply chain.

Our Design Services

We offer a wide spectrum of value-add design services to enhance our relationships with current customers and to build new customer relationships. Our teams are strategically staffed to support development projects of all sizes, from turnkey system design and joint development to industrialization and product optimization activities. Our design services support products across all markets we serve and include applications such as cloud data center server platforms; medical and consumer health devices; automotive assemblies for advanced architectures and enhanced functions; vision and safety systems; connected consumer products and appliances; digital commerce ecosystem products for retail environments; power and storage products supporting the energy infrastructure; and smart controls and security for digital building and utilities. These design services include:

  • Electronic Design.** Our Electronic Design team provides electronic hardware and embedded software design services for analog, digital, radio frequency, power, sensor, and optical component applications. This ranges from initial concept and system architecture through design implementation and new product introduction to mass production.

  • Experience Design.** Our Experience Design team works with product design teams to create product experiences that resonate with consumers through user research, industrial design, user interface design, and human factors. These capabilities help create, develop, and connect concepts and specifications that optimize the function, value, and appearance of products for both consumers and manufacturing partners.

  • Mechanical Design.** Our Mechanical Design team specializes in the design of plastic and metal components, enclosures, sub-assemblies, and systems, with advanced modeling and analysis of electronic, electro-mechanical, and optical assemblies. This includes all aspects of product concept, detail design, wide-ranging environmental applications, thermal management, and tooling management.

  • Optical Design.** Our Optical Design team applies advanced optics expertise to develop solutions for virtual and/or augmented reality, Light Detection and Ranging (“LiDAR”), 3D sensing, projection, and imaging. Throughout the design process, we develop the required processes, equipment, and testing specific to optics to help ensure seamless transition from design to precision mass production.

  • Industrialization Engineering Services.** Our engineering services combine multiple functions to work with design teams to optimize products for maximum performance, highest quality, and time-to-market while balancing cost and manufacturability. These functions include our computer-assisted design (“CAD”) team, delivering PCBA design with advanced CAD tools; our Value Analysis and Value Engineering team, improving value and reducing cost of both electrical and mechanical assemblies; and our Engineering Prototyping teams for all development stages. Efforts focus on optimizing designs, reducing material and component complexity, and identifying cost-effective sourcing options.

  • Product Verification.** Our Product Verification team provides complete product verification throughout the full design cycle and executes specific test services. This includes product verification to assess performance, reliability, and durability under simulated real-world conditions, failure analysis, regulatory compliance and safety, packaging, simulation, data analysis, and component analysis to identify and mitigate potential risks early in the development process.

  • Manufacturing Test Solution Development.** Our Manufacturing Test Solution Development team provides integral support to the design teams to embed testability in designs and enable efficient investment in manufacturing resources. The use of software-driven instrumentation and test process design and management reduces human-dependent test processes and promotes traceability and visibility throughout the manufacturing test process. Capabilities include development of test specifications, tester design, and execution of structural, functional, and environmental tests. Early integration of test planning supports defect reduction and consistent product quality.

Fabrication and Assembly

We offer systems assembly, test, direct-order fulfillment, and configure-to-order services to our customers. Our systems assembly services extend our range of assembly activities to include assembly of higher-level sub-systems and systems incorporating multiple PCBAs. In addition, based on quality assurance programs developed with our customers, we provide testing services for our PCBAs, sub-systems, and systems products. Our quality assurance programs include product testing under various environmental conditions to help ensure that our products meet or exceed required customer specifications.

Technology and Research and Development

We believe that our manufacturing and testing technologies are among the most advanced in our industry. To meet our customers’ increasingly sophisticated needs, we continuously engage in R&D activities designed to create new and improved products and manufacturing solutions for our customers. Through our R&D efforts, we intend to continue offering our customers efficient manufacturing processes with high quality and differentiating product solutions using the latest technologies. These technologies and R&D activities include:

  • Automation for tooling, manufacturing, and end customer solutions

  • Next generation electronic interconnections

  • Advanced electrical assembly and test processes

  • Advanced polymer and metal material science

  • Ceramic, metal and plastic single/multi-shot injection molding

  • In-mold mechanical & electrical assembly solutions

  • Advanced coating solutions for plastics, metals, and lenses

  • Thermal-plastic composite formation

  • Advanced thermal management solutions

  • Advanced sensor integration

  • Optical sensors across wavelengths

  • Co-packaged optics

  • Silicon photonics

  • Sterilization, device filling, and fluid management

  • Outsourced semiconductor assembly and test (“OSAT”) capabilities

  • Sustainable materials and design

  • Artificial intelligence and machine learning

Our R&D efforts span the markets we serve to provide our customers leading edge technologies and solutions.

Customers and Marketing

A key tenet of our strategy is to develop and expand long-term relationships with leading companies in high-growth industries that benefit from global, highly automated, continuous-flow manufacturing. A small number of customers and significant industry sectors have historically comprised a major portion of our net revenue. While this concentration reflects the depth of our customer relationships, we continue to diversify our customer base across industries and geographies to strengthen resilience. We also market our services and solutions through our website and social media platforms, as well as through direct engagement with prospective customers, industry events, and targeted outreach initiatives.

In fiscal year 2026, our five largest customers accounted for approximately 37% of our net revenue, and 76 customers accounted for approximately 90% of our net revenue. The table below sets forth the respective portion of net revenue attributable to customers that accounted for a significant concentration of our net revenue during the periods indicated:

Percentage of Net Revenue Fiscal Year Ended August 31,
202620252024
Customer A (1)20%16%*
Customer B (2)**11%
  • Amount was less than 10% of total.

(1)Sales to this customer were reported primarily in the Intelligent Infrastructure segment.

(2)Sales to this customer were reported in the Connected Living and Digital Commerce segment.

Competition

Our business is highly competitive. We compete against numerous domestic and foreign electronic manufacturing solutions providers, diversified manufacturing service providers, and design providers. We also face competition from the manufacturing operations of our current and potential customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing.

We compete with different companies depending on the type of service we are providing and/or the geographic area in which an activity takes place. We believe that the principal competitive factors in the manufacturing services market are: cost; accelerated production time-to-market; higher efficiencies; global locations; rapid scaling of production; advanced technologies; quality; and improved pricing of components. We believe we are extremely competitive with regard to all of these factors.

Components Procurement

We procure components from a broad group of suppliers, determined on an assembly-by-assembly basis. Our global sourcing and purchasing locations are strategically placed in various countries throughout the world along with our global commodity management and supplier relationship teams. These locations manage our end-to-end procurement lifecycle. This regionalized expertise along with our supplier relationships provide efficient procurement operations.

Some of the products we manufacture contain one or more components that are only available from a single source. Some of these components are allocated from time to time in response to supply shortages. In some cases, supply shortages will substantially curtail production of all assemblies using a particular component.

Proprietary Rights

We regard certain aspects of our technology, design, production and product management, supply chain, and other services as proprietary intellectual property. We rely upon a combination of intellectual property laws, and confidentiality and non-disclosure agreements with our customers, employees, suppliers and other third parties; and security systems, policies, and procedures to protect our proprietary rights. We own a portfolio of patents and patent applications relating to a variety of inventions, and expect to continue developing and selectively protecting intellectual property as our business evolves. While we believe our intellectual property rights are important to our business in the aggregate, we do not believe that our business is materially dependent on any individual patent or other intellectual property right. Our success also depends on the knowledge and experience of our management and workforce and on our ability to develop, enhance, and market our technologies and services.

We license certain technology and intellectual property rights from third parties. These licenses generally permit us to use the applicable technology and intellectual property in the jurisdictions in which we operate, and may generally be terminated upon a material breach by us. We do not believe that our business is materially dependent upon any such individual technology or intellectual property license.

Human Capital Management

As of August 31, 2026, our workforce consists of talented and dedicated employees across approximately 120 locations in 30 countries. Following is a summary of employees by region (in thousands):

RegionNumber of Employees
Asia72
Americas52
Europe16
Total(1)140

(1)Total headcount includes permanent, temporary and contingent workers.

In certain locations, our employees are represented by labor unions and by works councils. We promote positive employee relations globally and have not experienced a significant work stoppage or strike.

Safety

“Safety First. Always.” is a fundamental value that is ingrained in our culture. We are committed to safety standards in all of our facilities. We have implemented a continuous improvement-based Health and Safety Management System, including annual training assessments coupled with engaged leaders and employees who prioritize safety.

Human Rights

We believe that respect for fundamental human rights is an essential element of responsible corporate citizenship. We are committed to conducting business in accordance with internationally recognized human rights and labor standards, supported by our Code of Conduct, Supplier Code, and related policies.

Culture & Belonging: Jabil’s Cultural Initiatives

Our workforce provides us with the innovation and creativity that allows us to continue our success. Built on respect, our culture fosters an environment where employees feel welcomed, valued, and safe – both psychologically and physically. Welcoming a spectrum of backgrounds, experiences, viewpoints, and abilities, we collaborate to create an environment where employees can be their authentic self and contribute to Jabil’s success.

In alignment with our Code of Conduct, we are dedicated to establishing a discrimination-free and harassment-free workplace globally. This commitment is guided by our enterprise-wide priorities of mitigating biases, cultivating inclusive leadership, and developing diverse talent.

Our global sites have developed and implemented programs to support the employment, development, and retention of employees with disabilities. These efforts include enhancements to physical and digital accessibility, as well as training initiatives designed to foster a more inclusive environment for all employees. In collaboration with our operations team, we have also established a baseline assessment of site accessibility to help guide future improvements and measure progress over time.

Our commitment to our employees’ safety and wellbeing goes beyond physical health to include mental health. At Jabil, we provide our full-time employees two days of paid time off for health and wellbeing and one day for community service in addition to standard paid time off and holidays.

To serve our communities where we live and operate, in fiscal year 2026, Jabil employees completed over 529,000 volunteer hours. Jabil’s commitment to giving back remains for fiscal year 2027 with a continued focus in the areas of education, empowerment, and the environment. We believe that while our efforts are locally driven, the impact is global.

Jabil hosted its annual Deliver Best Practices Global Finals representing 18 locations from 12 countries. This continuous improvement program embodies the best of Jabil’s culture while focusing on our key business drivers (People, Process, Social & Environmental, and Technology & Innovation).

Recognition plays an important role in appreciating others for going above and beyond their normal job duties and doing what is right for our customers, people, and communities. Jabil acknowledges these well-deserved efforts through our enterprise recognition program, Respect. Recognize. Reward., in addition to regional and site-based recognition efforts that celebrate our employees worldwide. In fiscal year 2025, we expanded the program to recognize more employees each quarter, and in fiscal year 2026, over 4,400 employees were recognized, a 66% increase over the previous fiscal year.

Compensation and Benefits

Jabil’s compensation programs are designed to align the compensation of our employees with Jabil’s performance and to provide the proper incentives to attract, retain, and motivate employees to achieve superior results. Specifically:

  • We seek to provide employee pay levels that are competitive and consistent with employee positions, skill levels, experience, knowledge, and geographic location.

  • Salary increases and incentive compensation are based on merit and performance.

  • All full-time U.S. employees are eligible for health insurance, paid and unpaid leaves, a retirement plan, and life and disability/accident coverage. Benefits outside the U.S. are provided based upon country-specific practices and are intended to support the health and wellbeing of our employees and their families.

  • Supporting the mental health and emotional wellbeing of our employees and their families is a high priority at Jabil. We have implemented several programs and benefits over the past several years to help de-stigmatize mental health issues and assist employees in finding and leveraging appropriate resources. These include a global employee assistance program (EAP), on-site behavioral health resources in some locations, and education for our leaders on ways to recognize and respond to signs of mental health and substance abuse issues. Additionally, our global Health and Wellbeing programs help to strengthen mental health resilience.

  • The majority of our employees around the world are eligible to participate in our Employee Stock Purchase Plan, allowing them to become owners of Jabil stock at a discount.

Career Growth and Development

At Jabil, we invest in the professional and personal growth and development of our employees at all levels of the organization. Our learning solutions are designed to help employees build skills, strengthen capabilities, and support long-term career growth. Jabil offers learning programs and offerings for all level of employees (hourly, professional, and management).

As part of our talent strategy, we continue to utilize the LinkedIn Learning platform to enhance employees' access to the tools, resources, and support needed to take charge of their career development. We provide free access to LinkedIn Learning to all professional, management, and executive leaders. As technology continues to evolve, Jabil is investing in AI awareness and capability development to help employees adapt to changing ways of working. Through learning resources and practical application of AI-enabled tools, employees are encouraged to build the knowledge and skills needed to enhance productivity, innovation, and decision-making.

Our leaders are the cornerstone of Jabil’s success. They serve as a critical link between the strategic vision and the day-to-day execution of the work. One example of a program used to strengthen leadership skills is the Supervisory Basics Program – an internally developed program that seeks to equip supervisors with foundational knowledge that reinforces Jabil’s culture, establishes consistent standards for supervisor–employee interactions, and enhances understanding of key financial and legal principles.

Employee Engagement

Employee feedback plays an important role in shaping the employee experience at Jabil. Through our Your Voice Matters listening strategy, we utilize an independent third party to gather feedback across our global workforce. We alternate between comprehensive global engagement surveys and targeted pulse surveys, allowing us to monitor employee sentiment, evaluate progress against action plans, and identify opportunities for continuous improvement. Fiscal year 2026 was a pulse survey year. Insights gathered through these surveys help inform leadership actions and drive continuous improvement across the organization.

Environmental Laws and Regulations

We are subject to a variety of federal, state, local, and foreign environmental, health and safety, product stewardship, and producer responsibility laws and regulations, including those relating to the use, storage, discharge, and disposal of hazardous chemicals used during our manufacturing process; those governing worker health and safety; those requiring design changes, supply chain investigation, or conformity assessments; or those relating to the recycling or reuse of products we manufacture.

Information about our Executive Officers

Executive officers are appointed by the Board of Directors and serve at the discretion of the Board. There are no family relationships among our executive officers and directors. There are no arrangements or understandings between any of our executive officers and any other persons pursuant to which any of such executive officers were selected. Below is a list of our executive officers:

Adam E. Berry (age 49) was named Senior Vice President, Investor Relations & Corporate Affairs in May 2024. He previously served as Vice President, Investor Relations from September 2018. Mr. Berry held other roles of increasing responsibility since joining Jabil in 2010 as Director of Investor Relations. Mr. Berry holds a bachelor’s in Communications from Boston College and an MBA from Georgia Institute of Technology.

Steven D. Borges (age 58) was named Executive Vice President, Global Business Units in May 2024. He previously served as Executive Vice President, Chief Executive Officer, Diversified Manufacturing Services from June 2022; Executive Vice President, Chief Executive Officer, Regulated Industries, from September 2020, with additional responsibility for additive Manufacturing; and as Executive Vice President, Chief Executive Officer, Healthcare from September 2016 through August 2020. Mr. Borges joined Jabil in 1993. He holds a bachelor’s in Business Administration and Management from Fitchburg State University.

Matthew Crowley (age 51) was named Executive Vice President, Global Business Units in May 2024. He most recently served as Senior Vice President, Global Business Units from May 2022, and from March 2019 until April 2022, as Vice President, Global Business Units, and from February 2018 to February 2019 as Senior Director, Cloud. Before joining Jabil in 2018, Mr. Crowley held positions with Dell and Amazon Web Services.

Michael Dastoor (age 61) was named Chief Executive Officer in May 2024. Over his 25-year tenure at Jabil, he has held multiple leadership roles across Jabil’s global markets, including serving as Executive Vice President, Chief Financial Officer from April 2018. Mr. Dastoor previously served as Senior Vice President, Controller from July 2010. Mr. Dastoor joined Jabil in 2000. He holds a degree in Finance and Accounting from the University of Bombay and is a Chartered Accountant from the Institute of Chartered Accountants in England and Wales.

Gregory B. Hebard (age 57) was named Chief Financial Officer in May 2024. He most recently served as Senior Vice President, Treasurer since 2021. Since joining Jabil in 2009, Mr. Hebard has held roles of increasing responsibility in finance, including Senior Vice President, CFO Green Point from 2017 to 2021 and Vice President, Financial Planning & Analysis from 2013 to 2017. He holds a master’s in Business from DePaul University and a bachelor’s in Finance from the University of Iowa.

Francis (“Frank”) G. McKay (age 56) was named Senior Vice President, Chief Supply Chain Officer, in January 2019. Prior to his current role, he served as Vice President, Procurement & Purchasing Services from October 2014 and held a variety of management positions in Europe, Asia and the US since joining Jabil in 1997. Mr. McKay holds a bachelor’s from University of Strathclyde.

Kristine Melachrino (age 48) was named Executive Vice President, General Counsel, in March 2025. She most recently served as Senior Vice President, General Counsel since October 2022. She joined Jabil in 2007 holding various roles in the legal department supporting the functional and business teams globally. Prior to this role, Ms. Melachrino served as Vice President, Senior Deputy General Counsel for the global Commercial legal team, advising on complex legal and regulatory matters to facilitate business growth; and Assistant Corporate Secretary. She holds a Juris Doctor from Stetson University College of Law, and an MBA from Stetson University.

Andrew D. Priestley (age 55) was named Executive Vice President, Chief Operations Officer in January 2026. He most recently served as Executive Vice President, Global Business Units since May 2024. Since joining Jabil in 1996, he has held positions of increasing responsibility across the Company, including as Senior Vice President, Global Business Units since 2014. Mr. Priestley holds an honors degree in Engineering with Management from the Edinburgh Napier University.

Rafael Renno (age 47) was named Senior Vice President, Global Business Units in January 2026 leading Jabil’s Connected Living & Digital Commerce segment. Prior to his current role, he served as Senior Vice President, Global Business Units leading Jabil’s Digital Commerce Division, from September 2023 until January 2026. Prior to 2023, he served as Vice President, Global Business Units, leading Retail Automation. Mr. Renno joined Jabil in 2005 and has held a range of senior leadership positions in business development and supply chain management. He holds a bachelor’s degree in mechanical engineering from Universidade Federal de Minas Gerais in Brazil and a postgraduate degree in Finance from Fundação Dom Cabral.

Gary K. Schick (age 56) was named Senior Vice President and Chief Human Resources Officer in October 2023. He most recently served as Vice President, HR Operations from October 2022. Mr. Schick has held several other positions of increasing responsibility in human resources since joining Jabil in August 2018 as a Senior Director, Human Resources. Mr. Schick holds a bachelor’s in Economics from Northwestern University and a Juris Doctor from the University of Pittsburgh School of Law.

May Y. Yap (age 56) was named Senior Vice President, Chief Information Officer in September 2020. She joined Jabil in 2014 as Vice President and CIO of Jabil Green Point. Ms. Yap holds an MBA and a master’s in Computer Science from University of Hull and a doctorate in business administration and management from New York University.

Additional Information

Our principal executive offices are located at 10800 Roosevelt Boulevard North, St. Petersburg, Florida 33716, and our telephone number is (727) 577-9749. We were incorporated in Delaware in 1992. Our website is located at https://www.jabil.com. Through a link on the “Investors” section of our website, we make available our Annual Report on Form 10-K, our Quarterly Reports on Form 10-Q, our Current Reports on Form 8-K and any amendments to those reports, free of charge, as soon as reasonably practicable after they are electronically filed with, or furnished to, the SEC. The “Investors” section of our website contains a significant amount of information about our Company, including a Sustainability Report, financial and other information for investors. The information that we post on the “Investors” section of our website could be deemed to be material information. We encourage investors, the media and others interested in Jabil to visit our website. Information on our website, however, is not a part of this report.

Item 1A. Risk Factors

Business and Operational Risks

Our ability to schedule production, manage capital expenditures, and maximize the efficiency of our manufacturing capacity is highly dependent on the actions of our customers, who generally do not commit to long-term production schedules and may cancel orders, change production quantities, delay production, and/or change sourcing strategy.

Many of our customers do not commit to firm production schedules for more than one quarter. We make significant decisions, including determining the levels of business that we will seek and accept, production schedules and locations, component procurement commitments, personnel needs, and other resource requirements, based on our estimate of customer requirements. Our inability to forecast the level of customer orders with certainty makes it difficult to schedule production and maximize utilization of our manufacturing capacity and supply chain capabilities.

Many factors outside of our control impact our customers and their ordering behavior, including recession in end markets, changing technology and industry standards, commercial acceptance for products and shifting market demand, product obsolescence, global pandemics, and loss of business. Customers have canceled their orders, changed production quantities or designs, delayed production, changed their sourcing strategy, and terminated their relationships with us. We cannot assure you that present or future customers will not terminate their service arrangements with us or significantly change, reduce, cancel, or delay the amount of services ordered. Such changes, delays, and cancellations have led to, and may lead in the future to, a decline in our production and our possession of excess or obsolete inventory that we may not be able to sell to customers or third parties. Our ability to recover excess and obsolete inventory costs varies by customer and industry. This has, and may again, result in write downs of inventories, reduction in the number of products that we sell, delays in payment for inventory that we purchased, and reductions in the use of our manufacturing facilities. As many of our costs and operating expenses are relatively fixed, a reduction in customer demand, particularly a reduction in demand for a product that represents a significant amount of revenue, can harm our gross profit margins and results of operations. In the past, we have also been required to increase staffing and other expenses in order to meet anticipated demand. On occasion, customers have required rapid increases in production for one or more of their products or requested that we relocate our manufacturing operations or transfer manufacturing from one facility to another, which stresses our resources and may reduce operating margins.

Our business at times experiences periods of rapid growth which can place considerable demands upon our management team and our operational, financial, and management information systems. Our ability to manage growth effectively requires us to continue to implement and improve these systems; avoid cost overruns; maintain customer, supplier, and other favorable business relationships during transition periods; efficiently and effectively dedicate resources to existing customers as well as new projects; acquire or construct additional facilities; occasionally transfer operations to different facilities; acquire equipment in anticipation of demand; procure materials and components; continue to develop the management skills of our managers and supervisors; adapt relatively quickly to new markets or technologies and continue to hire, train, motivate and manage our employees. Our failure to effectively manage growth, as well as our failure to realize the anticipated benefits of the actions we take to try to manage our growth, could have a material adverse effect on our results of operations.

In addition, we sometimes experience difficulty forecasting the timing of our receipt of payment from customers. The necessary process to begin manufacturing can be lengthy. Because we make capital expenditures during this ramping-up process and may not receive payment until after we produce and ship the customer’s products, any delays or unanticipated costs in the ramping-up process have, and may again have, a significant adverse effect on our cash flows and our results of operations. Servicing our largest customers may also require us to increase our capital expenditures.

Because we depend on a limited number of customers, a reduction in sales to any one of those customers has and could again cause a significant decline in our revenue.

We currently depend, and expect to continue to depend for the foreseeable future, upon a relatively small number of customers for a significant percentage of our net revenue and upon their continued existence, growth, viability, and financial stability. See “Business – The Company.” In some instances, particular manufacturing services we provide for a customer represent a significant portion of the overall revenue we receive from that customer. As a result of this concentration, a reduction in business from one or more of our largest customers could have a material adverse effect on our results of operations. In addition, if one or more of our significant customers were to become insolvent or otherwise become unable to pay us on a timely basis, or at all, our operating results and financial condition could be adversely affected.

Efficient component and material purchasing is critical to our manufacturing processes and contractual arrangements. A shortage of components or an increase in price could interrupt our operations and reduce our profit, increase our inventory carrying costs, increase our risk of exposure to inventory obsolescence and cause us to purchase components of a lesser quality.

Strategic and efficient component and materials purchasing is an aspect of our strategy. Inflation rates have increased and may continue to rise. Our suppliers have raised their prices and may continue to raise prices. When prices rise, they impact our margins and results of operations if we are not able to pass the increases through to our customers or otherwise offset them. Most of our significant long-term customer contracts permit quarterly or other periodic prospective adjustments to pricing based on decreases and increases in component prices and other factors; however, we could bear the risk of component price increases that occur between any such re-pricings or, if such re-pricing is not permitted, during the balance of the term of the particular customer contract. There can be no assurance that we will continue to be able to purchase the components and materials needed to manufacture customer products at favorable prices. Accordingly, certain component price increases could adversely affect our gross profit margins and results of operations.

Some of the products we manufacture require one or more components that are only available from a single source. Some of these components are subject to supply shortages from time to time. In some cases, supply shortages will substantially curtail production of all assemblies using a particular component. A supply shortage can also increase our cost of goods sold if we have to pay higher prices for components in limited supply, or cause us to have to redesign or reconfigure products to accommodate a substitute component. In the past there have been industry wide conditions, pandemics, natural disasters and global events that have caused material and component shortages. Our supply chain has recently been impacted by component shortages, most notably in the semiconductor industry, and is currently impacted by the global memory component shortage. Our production of a customer’s product has and could again be negatively impacted by any quality, reliability or availability issues with any of our component suppliers. The financial condition o

Showing the first 8K of 73K characters. Open the full section

Item 1B. Unresolved Staff Comments

There are no unresolved written comments from the SEC staff regarding our periodic or current reports.

Item 1C. Cybersecurity

Risk Management and Strategy

We are committed to reducing the risk of cybersecurity compromise, either intentional or unintentional, to our customers, employees, and company proprietary information resources.

Our cybersecurity risk management program is integrated into our global enterprise risk management framework, which is designed to help identify, monitor, and mitigate key strategic risks. Our enterprise risk assessment, which includes data protection and cybersecurity, is developed annually to provide insight into the risks with the greatest potential to impact Jabil’s strategy and our financial goals. Key components of our cybersecurity risk management program include the following:

  • Cybersecurity policies***.* We leverage cybersecurity industry-standard frameworks, including the National Institute of Standards and Technology Cybersecurity Framework (“NIST”), and insights from internal assessments to develop policies to guide the use of our information assets (for example, business information and information resources such as mobile phones, computers, and workstations), access to specific intellectual property or technologies, deployment of AI within the Company, and protection of personal information. The Company has also established written policies and procedures to help ensure that cybersecurity incidents are quickly assessed and addressed.

  • Risk assessment.** The Company uses risk assessment processes to identify and prioritize cybersecurity risks, employ operational controls to mitigate risks, report incidents, and analyze trends, and employ a corrective action process to address nonconformities. Key risk indicators are used across all business functions to monitor and measure our cybersecurity risk exposure. Through this cross-functional approach, management identifies potential operational and strategic risks which could impact our strategy and financial goals.

  • System safeguards.** We implement industry-standard technical safeguards that are designed to protect our information systems, operations, and sensitive information from cybersecurity threats. By collaborating with internal stakeholders across the company, we integrate foundational cybersecurity principles throughout our organization, including multiple layers of cybersecurity defenses and restricted access based on business need. We frequently conduct vulnerability assessments to identify new risks and periodically test the efficacy of our safeguards through both internal and external penetration tests.

  • Security Awareness and Training.** Cybersecurity education contributes to the safety of the Company, customer data, and employee sensitive data and assets. Our employees undergo regular training on information security, cybersecurity awareness, and the protection of confidential information. This training is designed to promote an understanding of the behaviors and technical requirements needed to safeguard Company data. Additionally, we provide ongoing education to help employees recognize and report suspicious activity. In addition, higher risk employees undergo routine anti-phishing testing and training.

  • Assessments.** We periodically assess and test our cybersecurity policies, standards, processes, and practices that are designed to address threats. This includes monthly metrics review, threat modeling, vulnerability testing, and other exercises to evaluate our cybersecurity effectiveness. We regularly engage third parties to assist with our assessments and testing. Where appropriate, we adjust our cybersecurity policies, standards, processes, and practices accordingly based on internal and external assessment and testing results.

  • Engagement of third-party service providers***.* The Company utilizes third-party cybersecurity experts to assess the Company’s cybersecurity risks and conduct penetration testing to measure our cybersecurity risk management program relative to industry-standard frameworks. The Company has established a standardized process for assessing and managing potential risks associated with the engagement of third-party service providers that request access to the Company’s information systems.

  • Incident response.** The Cybersecurity Incident Response Team (“CIRT”), deploys, maintains, and monitors various tools and processes, including periodic tabletop exercises, designed to safeguard against and detect cybersecurity incidents that may occur. As part of our incident response program, members of management are informed about and monitor the prevention, detection, mitigation, and remediation of cybersecurity incidents. In accordance with established written policies and procedures, escalation protocols are used to provide information to, and engage with, executive management, the Cybersecurity Committee and the Board, throughout the incident response process. The CIRT reviews these controls regularly, and makes enhancements as needed to incorporate lessons learned, updated industry standards, and any new or revised legal requirements.

As of the date of this report, we are not aware of any risks from cybersecurity threats, including as a result of any cybersecurity incidents, which have materially affected us during fiscal year 2026 or are reasonably likely to materially affect us in the near term, including our business strategy, results of operations, or financial condition. Additional information about our cybersecurity risks is discussed in “Disruptions to our information systems, including security breaches, losses of data or outages, and other security issues, have and could in the future adversely affect our operations” in Item 1A. Risk Factors, which should be read in conjunction with the information above.

Governance

The Board oversees risk management directly and through its committees. Generally, the Board oversees risks that may affect the business of Jabil as a whole, including operational matters. The Cybersecurity Committee (“the Committee”) assists the Board in fulfilling its oversight responsibilities with regard to the Company’s cybersecurity programs and risks, including the cybersecurity practices, procedures, and controls management uses to identify, assess, and manage the Company’s key cybersecurity programs and risks, to protect the confidential intellectual property information and data of the Company and its customers and to comply with applicable data protection laws and regulations.

The Committee of the Board meets quarterly. At each meeting, it receives reports from the Chief Information Security Officer (“CISO”).

As part of its role in overseeing risk management, the Committee reports to the Board annually regarding briefings provided by management and advisors as well as the Committees’ own analysis and conclusions regarding cybersecurity risks faced by the Company. The Committee will review with management and the Board, and advise them regarding the following matters, as necessary:

  • Management’s implementation of cybersecurity programs, policies, and procedures and management’s actions to safeguard their effectiveness;

  • The effectiveness of the Company’s cybersecurity programs and its practices for identifying, assessing, and mitigating cybersecurity risks across all business functions;

  • The Company’s controls to prevent, detect and respond to cyber-attacks or information or data breaches involving the Company;

  • Cyber crisis preparedness, incident response plans, and disaster recovery capabilities;

  • Reports and presentations received from management and the Company’s advisors regarding the management of cybersecurity programs and risks, including protection of confidential intellectual property, information, and data.

The CISO leads the Corporate Information Security organization which oversees the security posture of Jabil’s data, networks, and resources. The CISO is responsible for notifying and providing updates on cybersecurity incidents to the Chief Information Officer (“CIO”). The CIO is responsible for overseeing global IT operations and digital transformation across the Company and leads the strategic direction on IT polices to safeguard company and client assets against cybersecurity threats.

The CISO has over 21 years of experience leading large-scale security programs protecting critical infrastructure and sensitive data, modernizing digital identity systems, and driving cultural transformation within security teams in the federal, healthcare, and global manufacturing sectors. The CIO has over 34 years of experience focused on corporate strategy formulation and implementation, IT management including cybersecurity, and business and process transformation.

Item 2. Properties

We own or lease facilities located primarily in the geographies listed below. We believe that our properties are generally in good condition, are well maintained, and are generally suitable and adequate to carry out our business at expected capacity for the foreseeable future. The majority of the square footage is active manufacturing space and is reported in the Regulated Industries, Intelligent Infrastructure, and Connected Living and Digital Commerce operating segments, as all use these properties. Our corporate headquarters is located in St. Petersburg, Florida.

The table below lists the approximate square footage for our facilities as of August 31, 2026 (in millions):

RegionApproximate Square Footage
Asia20
Americas15
Europe5
Total(1)(2)40

(1)Approximately 13% of our total square footage is not currently used in business operations.

(2)Consists of 15 million square feet in facilities that we own with the remaining 25 million square feet in leased facilities.

Our manufacturing facilities are ISO certified to ISO 9001:2008 standards and most are also certified to ISO-14001:2004 environmental standards.

Item 3. Legal Proceedings

See the discussion in Note 18 – “Commitments and Contingencies” to the Consolidated Financial Statements.

Item 4. Mine Safety Disclosures

Not applicable.

PART II

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Market Information and Dividends

Our common stock trades on the New York Stock Exchange under the symbol “JBL.” See discussion of our cash dividends declared to common shareholders in Note 12 – “Stockholders’ Equity” to the Consolidated Financial Statements.

We expect to continue to declare and pay quarterly dividends of an amount similar to our past declarations. However, the declaration and payment of future dividends are discretionary and will be subject to determination by our Board of Directors each quarter following its review of our financial performance and global economic conditions.

On October 20, 2026, the closing sales price for our common stock as reported on the New York Stock Exchange was $277.18. As of October 20, 2026, there were 872 holders of record of our common stock. A substantially greater number of holders of our common stock are “street name” or beneficial holders, whose shares of common stock are held of record by banks, brokers, and other financial institutions.

Information regarding equity compensation plans is incorporated by reference to the information set forth in Item 12 of Part III of this report.

Stock Performance Graph

The performance graph and table show a comparison of cumulative total stockholder return, assuming the reinvestment of dividends, from a $100 investment in the common stock of Jabil over the five-year period ending August 31, 2026, with the cumulative stockholder return of the (1) S&P 500 Index and (2) peer group which includes Celestica Inc., Flex Ltd., Hon-Hai Precision Industry Co. Ltd, Plexus Corp., and Sanmina Corp.

StkPerGraphFY26.jpg

August 31202120222023202420252026
Jabil Inc.$100$98$187$179$336$501
S&P 500 Index – Total Returns$100$89$103$131$152$183
Peer Group$100$96$105$178$252$357

Issuer Purchases of Equity Securities

The following table provides information relating to our repurchase of common stock, excluding excise tax, during the three months ended August 31, 2026:

PeriodTotal Number of Shares Purchased**(1)**Average Price Paid per ShareTotal Number of Shares Purchased as Part of Publicly Announced Program**(2)**Approximate Dollar Value of Shares that May Yet Be Purchased Under the Program (in millions)****(2)
June 1, 2026 – June 30, 202639,912$369.5939,912$94
July 1, 2026 – July 31, 2026310,376$297.86306,682$1,503
August 1, 2026 – August 31, 2026188,141$333.68188,141$1,440
Total538,429$315.70534,735

(1)The purchases include amounts that are attributable to 3,694 shares of common stock surrendered to us by employees to satisfy, in connection with the vesting of restricted stock units and the exercise of stock options and stock appreciation rights, their tax withholding obligations.

(2)In July 2025, our Board of Directors authorized the repurchase of up to $1.0 billion of our common stock as publicly announced in a press release on July 17, 2025 (the “2026 Share Repurchase Program”). In July 2026, our Board of Directors authorized the repurchase of up to $1.5 billion of our common stock as publicly announced in a press release on July 15, 2026 (the “2027 Share Repurchase Program”). For more information, see “Liquidity and Capital Resources - Dividends and Share Repurchases”.

In December 2024, we issued a warrant to Amazon.com NV Investment Holdings LLC to acquire up to 1,158,539 of our ordinary shares as reported in a Current Report on Form 8-K filed on January 3, 2025. See Note 12 – “Stockholders’ Equity” to the Consolidated Financial Statements for further details.

Item 6. [Reserved]

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

Overview

We are one of the leading providers of engineering, supply chain, and manufacturing solutions. We deliver comprehensive design, production, and product management services to companies across a diverse range of industries and end markets. Our capabilities span the entire product lifecycle—from innovation, design, and planning to fabrication, assembly, delivery, and post-production— enabling seamless management of resources and materials across global supply chains. Through these integrated services, we help our customers reduce manufacturing costs, enhance supply chain efficiency, minimize inventory risk, lower transportation expenses, and accelerate product fulfillment.

We have three reporting segments: Regulated Industries, Intelligent Infrastructure, and Connected Living and Digital Commerce, which are organized based on the economic profiles of the services performed, including manufacturing capabilities, market strategy, margins, return on capital, and risk profiles. Our Regulated Industries segment is focused on regulated markets and includes revenues from customers primarily in the automotive and transportation, healthcare and packaging, and renewable and energy infrastructure industries. Our Intelligent Infrastructure segment is focused on the modern digital ecosystem including artificial intelligence (“AI”) infrastructure and includes revenues from customers primarily in the capital equipment, cloud and data center infrastructure, and networking and communications industries. Our Connected Living and Digital Commerce segment is focused on digitalization and automation, including warehouse automation and robotics, and includes revenues from customers primarily in the connected living and digital commerce industries.

Beginning September 1, 2026, our Connected Living and Digital Commerce segment was renamed to Intelligent Devices and Robotics to better reflect the evolution of the business, including our increased emphasis on automation and robotic capabilities and a strategic shift towards more highly complex, engineered solutions. Our Intelligent Devices and Robotics segment is focused on digitalization and automation, including warehouse automation and robotics, and includes revenues from customers primarily in the connected living and digital commerce and robotics industries. The name change did not impact the composition of the Company's reportable segments or the financial information reported for those segments.

Our cost of revenue includes the cost of electronic components and other materials that comprise the products we manufacture; the cost of labor and manufacturing overhead; and adjustments for excess and obsolete inventory. As a provider of turnkey manufacturing services, we are responsible for procuring components and other materials. This requires us to commit significant working capital to our operations and to manage the purchasing, receiving, inspecting, and stocking of materials. At times, we collect deposits from our customers related to the purchase of inventory in order to effectively manage our working capital. Although we bear the risk of fluctuations in the cost of materials and excess scrap, our ability to purchase components and materials efficiently may contribute significantly to our operating results. While we periodically negotiate cost of materials adjustments with our customers, rising component and material prices may negatively affect our margins. Net revenue from each product that we manufacture consists of an element based on the costs of materials in that product and an element based on the labor and manufacturing overhead costs allocated to that product. Our gross margin for any product depends on the mix between the cost of materials in the product and the cost of labor and manufacturing overhead allocated to the product.

Our operating results are impacted by the level of capacity utilization of manufacturing facilities; indirect labor costs; and selling, general, and administrative expenses. Operating income margins have generally improved during periods of high production volume and high capacity utilization. During periods of low production volume, we generally have reduced operating income margins.

We monitor the current economic environment and its potential impact on both the customers we serve as well as our end-markets and closely manage our costs and capital resources so that we can respond appropriately as circumstances change.

On February 20, 2026, the U.S. Supreme Court issued a ruling striking down tariffs imposed under the International Emergency Economic Powers Act (“IEEPA”), including, among others, tariffs on imports of certain Canadian, Chinese, and Mexican goods, a universal baseline tariff on imports from most countries, and reciprocal tariffs on select countries. On April 20, 2026, the U.S. Customs and Border Protection launched a system to process IEEPA tariff refund claims. The Company recognizes refunds in the Consolidated Financial Statements as and when the amounts are probable and reasonably estimable. During the fiscal year ended August 31, 2026, the Company began receiving refunds for IEEPA tariffs previously paid, which did not have a material impact on the Company’s results of operations. The global tariff landscape continues to shift rapidly, with changes impacting businesses and markets around the world. We continue to monitor the situation, including whether any additional refunds may be forthcoming, and we do not expect that the receipt of any additional refunds would have a material impact on the Company’s results of operations.

We have consistently utilized advanced circuit design, production design and manufacturing technologies to meet the needs of our customers. To support this effort, our engineering staff focuses on developing and refining design and manufacturing technologies to meet specific needs of specific customers. Most of the expenses associated with these customer-specific efforts are reflected in our cost of revenue. In addition, our engineers engage in research and development (“R&D”) of new technologies that apply generally to our operations. The expenses of these R&D activities are reflected in the research and development line item within our Consolidated Statements of Operations.

An important element of our strategy is the expansion of our global production facilities. The majority of our revenue and materials costs worldwide are denominated in U.S. dollars, while our labor and utility costs in operations outside the U.S. are denominated in local currencies. We economically hedge certain of these local currency costs, based on our evaluation of the potential exposure as compared to the cost of the hedge, through the purchase of foreign currency exchange contracts. Changes in the fair value of such hedging instruments are reflected within the Consolidated Statements of Operations and the Consolidated Statements of Comprehensive Income.

See Note 13 – “Concentration of Risk and Segment Data” to the Consolidated Financial Statements.

Summary of Results

The following table sets forth, for the periods indicated, certain key operating results and other financial information (in millions, except per share data):

Fiscal Year Ended August 31,
202620252024
Net revenue$35,954$29,802$28,883
Gross profit$3,317$2,646$2,676
Operating income$1,704$1,182$2,013
Net income attributable to Jabil Inc.$1,042$657$1,388
Earnings per share

Showing the first 8K of 84K characters. Open the full section

Item 7A. Quantitative and Qualitative Disclosures About Market Risk

Foreign Currency Exchange Risks

We transact business in various foreign countries and are, therefore, subject to the risk of foreign currency exchange rate fluctuations. We enter into forward foreign exchange contracts to economically hedge transactional exposure associated with commitments arising from trade accounts receivable, trade accounts payable, intercompany transactions, and fixed purchase obligations denominated in a currency other than the functional currency of the respective operating entity. We do not, and do not intend to use, derivative financial instruments for speculative or trading purposes. All derivative instruments are recorded on our Consolidated Balance Sheets at their respective fair values.

Forward foreign exchange contracts will generally expire in less than three months and are primarily denominated in Chinese yuan renminbi, euro, Malaysian ringgit, Mexican peso, and Swiss franc. Based on our overall currency rate exposures as of August 31, 2026 and 2025, respectively, including the derivative financial instruments intended to hedge the nonfunctional currency-denominated monetary assets and liabilities, an immediate 10% hypothetical change of foreign currency exchange rates would not have a material effect on our Consolidated Financial Statements. See Note 11 – “Derivative Financial Instruments and Hedging Activities” to the Consolidated Financial Statements for additional information.

Interest Rate Risk

Our exposure to market risk includes changes in interest rates that could affect the Consolidated Balance Sheet, Consolidated Statements of Operations, and the Consolidated Statements of Cash Flows. We are exposed to interest rate risk primarily on intra-quarter variable rate borrowings under the Credit Facility and our commercial paper program. There were no borrowings outstanding under debt facilities with variable interest rates as of August 31, 2026 and 2025, respectively.

We utilize valuation models to estimate the effects of sudden interest rate changes. A hypothetical 100-basis-point change in the interest rates under the Credit Facility and our commercial paper program would not have a material effect on our Consolidated Financial Statements. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources” and Note 7 – “Notes Payable and Long-Term Debt” to the Consolidated Financial Statements for additional information regarding our outstanding debt obligations.

The Company periodically enters into interest rate swaps to manage interest rate risk associated with the Company’s borrowings or anticipated debt issuances. Contemporaneously with the issuance of the 4.750% Senior Notes in January 2026, the Company settled cash flow hedges with an aggregate notional amount of $400 million, with various effective dates from March 2025 through December 2025. The cash received for the cash flow hedges at settlement was immaterial. The settled cash flow hedges are recorded in the Consolidated Balance Sheets as a component of AOCI and are amortized to interest expense, net in the Consolidated Statements of Operations. As of August 31, 2026, there were no outstanding interest rate swaps. See Note 11 – “Derivative Financial Instruments and Hedging Activities” for additional information regarding interest rate risk management.

Item 8. Financial Statements and Supplementary Data

Certain information required by this item is included in Item 7 of Part II of this Report under the heading “Quarterly Results (Unaudited)” and is incorporated into this item by reference. All other information required by this item is included in Item 15 of Part IV of this Report and is incorporated into this item by reference.

Item 9. Changes in and Disagreements With Accountants on Accounting and Financial Disclosure

There have been no changes in or disagreements with our accountants on accounting and financial disclosure.

Item 9A. Controls and Procedures

(a) Evaluation of Disclosure Controls and Procedures

We carried out an evaluation required by Rules 13a-15 and 15d-15 under the Exchange Act (the “Evaluation”), under the supervision and with the participation of our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), of the effectiveness of our disclosure controls and procedures as defined in Rules 13a-15 and 15d-15 under the Exchange Act as of August 31, 2026. Based on the Evaluation, our CEO and CFO concluded that the design and operation of our disclosure controls were effective to ensure that information required to be disclosed by us in reports that we file or submit under the Exchange Act is (i) recorded, processed, summarized, and reported within the time periods specified in SEC rules and forms, and (ii) accumulated and communicated to our senior management, including our CEO and CFO, to allow timely decisions regarding required disclosure.

On January 2, 2026, we completed the acquisition of Hanley Energy Group (“Hanley”). The scope of our evaluation of the effectiveness of our disclosure controls and procedures did not include the internal control over financial reporting of Hanley. This exclusion is in accordance with the SEC Staff’s guidance that an assessment of a recently acquired business may be omitted from the scope of a registrant’s assessment for a period of up to one year following the acquisition. Hanley accounted for 3.3% of total assets and less than 1.0% of net revenue as of and for the fiscal year ended August 31, 2026.

(b) Management’s Report on Internal Control over Financial Reporting

We assessed the effectiveness of our internal control over financial reporting as of August 31, 2026. Management’s report on internal control over financial reporting as of August 31, 2026, is incorporated herein at Item 15. Ernst & Young LLP, our independent registered public accounting firm, issued an audit report on the effectiveness of our internal control over financial reporting as of August 31, 2026, which is incorporated herein at Item 15.

Our management, including our CEO and CFO, does not expect that our internal control over financial reporting will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the Company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls may be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control.

The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.

Notwithstanding the foregoing limitations on the effectiveness of controls, we have reached the conclusions set forth in Management’s report on internal control over financial reporting as of August 31, 2026.

(c) Changes in Internal Control over Financial Reporting

For our fiscal quarter ended August 31, 2026, we did not identify any modifications to our internal control over financial reporting that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Item 9B. Other Information

Rule 10b5-1 Trading Plans

During the three months ended August 31, 2026, no director or “officer” of the Company (as defined in Rule 16a-1(f) under the Securities Exchange Act of 1934 (the “Exchange Act”)) adopted, modified, or terminated a “Rule 10b5-1 trading arrangement” or a “non-Rule 10b5-1 trading arrangement” (each as defined in Item 408 of Regulation S-K of the Exchange Act).

PART III

Item 10. Directors, Executive Officers and Corporate Governance

Information regarding our executive officers is included in Item 1 of Part I of this Report under the heading “Information about our Executive Officers.”

The other information required by this item is incorporated by reference to the information set forth under the captions “Election of Directors”, “Beneficial Ownership – Delinquent Section 16(a) Reports”, “Corporate Governance”, “Audit Committee Matters” and “Insider Trading Policy” in our Proxy Statement for the Annual Meeting of Stockholders to be filed with the SEC within 120 days after the end of our fiscal year ended August 31, 2026 (“Proxy Statement”).

Item 11. Executive Compensation

The information required by this item is incorporated by reference to the information set forth under the captions “Compensation Matters” (excluding the information under the caption “Pay Versus Performance”), “Election of Directors – Director Compensation” and “Corporate Governance – Compensation Committee Interlocks and Insider Participation” in our Proxy Statement.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this item is incorporated by reference to the information set forth under the captions “Beneficial Ownership – Share Ownership by Principal Stockholders and Management” and “Compensation Matters – Equity Compensation Plan Information” in our Proxy Statement.

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information required by this item is incorporated by reference to the information set forth under the captions “Corporate Governance – Related Party Transactions – Certain Related Party Transactions”, “Corporate Governance – Determinations of Director Independence” in our Proxy Statement.

Item 14. Principal Accounting Fees and Services

The information required by this item is incorporated by reference to the information set forth under the captions “Audit Committee Matters – Principal Accounting Fees and Services”, “– Policy on Audit Committee Pre-Approval of Audit, Audit-Related and Permissible Non-Audit Services” and “Ratification of Appointment of Independent Registered Public Accounting Firm” in our Proxy Statement.

PART IV

Item 15. Exhibits and Financial Statement Schedules

(a) The following documents are filed as part of this Report:

1.Financial Statements. Our consolidated financial statements, and related notes thereto, with the independent registered public accounting firm reports thereon are included in Part IV of this report on the pages indicated by the Index to Consolidated Financial Statements and Schedule.

2.Financial Statement Schedule. Our financial statement schedule is included in Part IV of this report on the page indicated by the Index to Consolidated Financial Statements and Schedule. This financial statement schedule should be read in conjunction with our consolidated financial statements, and related notes thereto.

Schedules not listed in the Index to Consolidated Financial Statements and Schedule have been omitted because they are not applicable, not required, or the information required to be set forth therein is included in the consolidated financial statements or notes thereto.

3.Exhibits. See Item 15(b) below.

(b) Exhibits. The following exhibits are included as part of, or incorporated by reference into, this Report.

(c) Financial Statement Schedules. See Item 15(a) above.

EXHIBIT LIST

Incorporated by Reference Herein
Exhibit No.DescriptionFormExhibitFiling Date/ Period End
3.1Registrant’s Certificate of Incorporation, as amended.10-Q3.15/31/2017
3.2Registrant’s Amended and Restated Bylaws.8-K3.110/23/2024
4.1Form of Certificate for Shares of the Registrant’s Common Stock. (P)S-113/17/1993
4.2Indenture, dated January 16, 2008, with respect to Senior Debt Securities of the Registrant, between the Registrant and U.S. Bank National Association (as successor in interest to The Bank of New York Mellon Trust Company, N.A. (formerly known as The Bank of New York Trust) Company, N.A.), as trustee.8-K4.21/17/2008
4.3Form of 4.250% Registered Senior Notes due 2027 (included as Exhibit A to the Officers’ Certificate filed herewith as Exhibit 4.10).8-K4.25/4/2022
4.4Form of 3.950% Senior Notes due 2028 (included as Exhibit A to the Officers’ Certificate filed herewith as Exhibit 4.11).8-K4.21/17/2018
4.5Form of 4.200% Senior Notes due 2029 (included as Exhibit A to the Officers’ Certificate filed herewith as Exhibit 4.15).8-K4.21/23/2026
4.6Form of 5.450% Senior Notes due 2029 (included as Exhibit A to the Officers’ Certificate filed herewith as Exhibit 4.12).8-K4.24/13/2023
4.7Form of 3.600% Senior Notes due 2030 (included as Exhibit B to the Officers’ Certificate filed herewith as Exhibit 4.13).8-K4.21/15/2020
4.8Form of 3.000% Senior Notes due 2031 (included as Exhibit B to the Officers’ Certificate filed herewith as Exhibit 4.14).8-K4.17/13/2020

Showing the first 8K of 215K characters. Open the full section

Item 16. Form 10-K Summary

Not applicable.

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

JABIL INC. Registrant
Date: October 23, 2026By:/s/ MICHAEL DASTOOR
Michael Dastoor Chief Executive Officer

POWER OF ATTORNEY

KNOW ALL THESE PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Michael Dastoor and Gregory B. Hebard and each of them, jointly and severally, his or her attorneys-in-fact, each with full power of substitution, for him or her in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorneys-in-fact or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:

SignatureTitleDate
By:/s/ STEVEN A. RAYMUNDChairman of the Board of DirectorsOctober 23, 2026
Steven A. Raymund
By:/s/ MICHAEL DASTOORChief Executive Officer and Director (Principal Executive Officer)October 23, 2026
Michael Dastoor
By:/s/ GREGORY B. HEBARDChief Financial Officer (Principal Financial and Accounting Officer)October 23, 2026
Gregory B. Hebard
By:/s/ ANOUSHEH ANSARIDirectorOctober 23, 2026
Anousheh Ansari
By:/s/ SUJATHA CHANDRASEKARANDirectorOctober 23, 2026
Sujatha Chandrasekaran
By:/s/ THOMAS T. EDMANDirectorOctober 23, 2026
Thomas T. Edman
By:/s/ CHRISTOPHER S. HOLLANDDirectorOctober 23, 2026
Christopher S. Holland
By:/s/ JOHN C. PLANTDirectorOctober 23, 2026
John C. Plant
By:/s/ RAEJEANNE SKILLERNDirectorOctober 23, 2026
Raejeanne Skillern
By:/s/ N.V. “Tiger” TYAGARAJANDirectorOctober 23, 2026
N.V. “Tiger” Tyagarajan

SCHEDULE II

JABIL INC. AND SUBSIDIARIES

SCHEDULE OF VALUATION AND QUALIFYING ACCOUNTS

(in millions)

Balance at Beginning of PeriodAdditions and Adjustments Charged to Costs and ExpensesAdditions/ (Reductions) Charged to Other AccountsWrite-offsBalance at End of Period
Reserve for excess and obsolete inventory:
Fiscal year ended August 31, 2026$67$56$—$(36)$87
Fiscal year ended August 31, 2025$63$26$—$(22)$67
Fiscal year ended August 31, 2024$58$40$—$(35)$63
Balance at Beginning of PeriodAdditions and Adjustments Charged to Costs and ExpensesAdditions/ (Reductions) Charged to Other AccountsWrite-offsBalance at End of Period
Reserve for warranties:
Fiscal year ended August 31, 2026$70$13$—$(5)$78
Fiscal year ended August 31, 2025$68$13$—$(11)$70
Fiscal year ended August 31, 2024$66$7$—$(5)$68
Balance at Beginning of PeriodAdditions Charged to Costs and ExpensesAdditions/ (Reductions) Charged to Other AccountsReductions Charged to Costs and ExpensesBalance at End of Period
Valuation allowance for deferred taxes:
Fiscal year ended August 31, 2026$400$17$1$(16)$402
Fiscal year ended August 31, 2025$368$30$23$(21)$400
Fiscal year ended August 31, 2024$303$96$3$(34)$368

See accompanying report of independent registered public accounting firm.