Masco 10-K 2013-12-31

10-K 1 a2218121z10-k.htm 10-K

Use these links to rapidly review the document

PART IV

**UNITED STATES SECURITIES AND EXCHANGE COMMISSION ****Washington, DC 20549 ****FORM 10-K **ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

**For the Fiscal Year Ended December 31, 2013 Commission File Number 1-5794 ****MASCO CORPORATION **(Exact name of Registrant as Specified in its Charter)

Registrant's telephone number, including area code: 313-274-7400 Securities Registered Pursuant to Section 12(b) of the Act:

Securities Registered Pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes þ No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No þ

Indicate by check mark whether the Registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or such shorter period that the registrant was required to submit and post such files). Yes þ No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. þ

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act. (Check one):

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No þ

The aggregate market value of the Registrant's Common Stock held by non-affiliates of the Registrant on June 28, 2013 (based on the closing sale price of $19.49 of the Registrant's Common Stock, as reported by the New York Stock Exchange on such date) was approximately $6,794,823,000.

Number of shares outstanding of the Registrant's Common Stock at January 31, 2014:

356,404,200 shares of Common Stock, par value $1.00 per share

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Registrant's definitive Proxy Statement to be filed for its 2014 Annual Meeting of Stockholders are incorporated by reference into Part III of this Form 10-K.

Masco Corporation 2013 Annual Report on Form 10-K

**TABLE OF CONTENTS **

**PART I **

**

Masco Corporation manufactures, distributes and installs home improvement and building products, with an emphasis on brand-name consumer products and services holding leadership positions. We are among the largest manufacturers in North America of a number of home improvement and building products, including faucets, cabinets, architectural coatings and windows, and we are one of the largest installers of insulation for new home construction. We provide broad product offerings in a variety of styles and price points and distribute products through multiple channels, including directly to homebuilders and wholesale and retail channels. Approximately 81 percent of our 2013 sales were generated by our North American operations.

Sales of home improvement and building products at retailers increased by almost 6 percent during 2013, despite continued economic uncertainties, weak consumer confidence and modest consumer spending. Housing starts increased approximately 18 percent during 2013, with the pace slowing in the second half of the year.

Throughout 2013, we continued to focus on our four strategic initiatives to improve our performance, and we achieved gains in each of those areas. First, we are extending and expanding our product leadership positions by leveraging our brands and introducing innovative new and improved products. We believe that we gained market share in our North American plumbing business with our DELTA®, PEERLESS®, and BRIZO® brands, and internationally with our HANSGROHE® products. Our decorative architectural products businesses focused on the professional segment with BEHRPRO® paint and KILZ® PRO-X product lines. BEHR® paint also expanded its product offering by introducing its MARQUEE™ exterior paint and PREMIUM DECKOVER® solid color coating for wood and concrete surfaces and by pursuing international opportunities. Milgard Manufacturing, our manufacturer of windows in the western U.S., and our U.K. Window Group continued to gain share in their markets. Our Masco Contractor Services business continued to achieve share gains in the installation of insulation for the new home construction, retrofit and commercial channels.

Another strategic initiative is to improve our performance by reducing costs, primarily through supply chain savings, and implementing lean principles and production process improvements. Over the last several years, we have taken out over $600 million of fixed costs, on a gross basis. We continue to seek improvements in our global supply chain to realize cost savings by or through simplifying the purchasing process and coordinating logistical operations.

Another strategic initiative is to improve our underperforming businesses, and during 2013, we saw our Cabinets and Related Products and our Installation and Other Services segments return to profitability. Approximately one third ($200 million) of our fixed cost reduction was attributable to our cabinetry businesses and one third came from our insulation businesses. By lowering our breakeven point, each of these segments saw a return to profitability during 2013 at much lower levels of revenue than historically. By reducing our fixed costs, we believe that we are strengthening the foundation for continued growth. Our Installation segment continued its improvement during 2013 through incremental new home construction activity, cost reductions from lean processes, leveraging our ERP system and supply chain savings.

Our final strategic initiative is strengthening our balance sheet through net debt reduction and maintaining strong liquidity through continued working capital improvements. We continued to reduce our debt by approximately $200 million through the retirement of notes due in August. At December 31, 2013, we had approximately $1.5 billion of cash, cash investments and short-term bank deposits.

We believe that we have managed our businesses successfully through the economic crisis and subsequent recession of recent years. We believe that our focus on our strategic initiatives of expanding our product leadership positions, reducing costs, improving our underperforming businesses and

strengthening our balance sheet have improved our performance and, as we continue to focus on these initiatives, will position us well as our markets continue to recover.

Recent Developments

On January 8, 2014, we announced that Timothy Wadhams is retiring from his position as the Company's President and Chief Executive Officer, effective February 14, 2014. Our Board of Directors has elected Keith J. Allman, age 51, to succeed Mr. Wadhams as President and Chief Executive Officer and to join the Company's Board of Directors, effective as of February 14, 2014. Mr. Allman joined the Company in 1998 and has served most recently as a Group President, with responsibilities for our Plumbing and North American Cabinet businesses. We thank Mr. Wadhams for his 37 years of service.

Our Business Segments

We report our financial results in five business segments aggregated by similarity in products and services. The following table sets forth the contribution of our segments to net sales and operating profit (loss) for the three years ended December 31, 2013. Additional financial information concerning our operations by segment and by geographic regions, as well as general corporate expense, net, as of and for the three years ended December 31, 2013, is set forth in Note P to our consolidated financial statements included in Item 8 of this Report.

(1)

Amounts exclude discontinued operations.

(2)

Operating profit (loss) is before general corporate expense, net, and gain on sale of fixed assets, net.

(3)

Operating profit (loss) is before net charges of $77 million regarding the 2012 litigation settlement, primarily in the Installation and Other Services segment and $9 million regarding the 2011 litigation settlements in the Cabinets and Related Products and the Other Specialty Products segments.

(4)

Operating profit (loss) includes impairment charges for goodwill and other intangible assets as follows: For 2012 – Other Specialty Products – $42 million. For 2011 – Plumbing Products – $1 million; Decorative Architectural Products – $75 million; and Other Specialty Products – $374 million.

All of our operating segments, except the Plumbing Products segment, normally experience stronger sales during the second and third calendar quarters, corresponding with the peak season for new home construction and repair and remodel activity.

Cabinets and Related Products

In North America, we manufacture and sell value-priced, stock and semi-custom assembled cabinetry for kitchen, bath, storage, home office and home entertainment applications in a broad range of styles and price points to address consumer preferences. We have also expanded our product offerings in this segment to include the manufacture and sale of kitchen countertops, as well as an integrated bathroom vanity and countertop solution. In the United Kingdom, we manufacture and sell assembled and ready-to-assemble kitchen, bath, and storage cabinetry. Our KRAFTMAID® brand is sold primarily to dealers, home centers and mass merchants and our MERILLAT®, MOORES™ and QUALITY CABINETS™ brands are sold primarily to dealers and homebuilders for both home improvement and new home construction. Cabinet sales are significantly affected by levels of activity in both new home construction and retail consumer spending, particularly spending for major kitchen and bathroom renovation projects. A significant portion of our sales for home improvement are made through home center retailers.

Our Cabinet segment was particularly affected by the economic downturn and decline in new home construction and repair and remodel activity. While improving, consumer spending for big ticket remodeling projects, including large kitchen and bath remodeling projects, continues to be below normal levels, which impacts our profitability. Although home construction is improving and is expected to continue to improve, the demand for new homes remains below the historic average and demand has increased for multi-family housing units, which are smaller than single-family housing units and require fewer cabinets for the kitchen and bathrooms. We continue our strategy to increase sales in this segment through brand building, new product introductions aimed to provide differentiated products to our multiple sales channels, and product innovation. We also continue to focus on our cost structure in this segment and improving cabinet production efficiencies.

The cabinet manufacturing industry in the United States and the United Kingdom includes several large competitors and numerous local and regional competitors. In recent years, we have experienced significant competition in the form of discounts and new product offerings by our competitors, which have impacted the segment's results of operations. We also face competition from foreign manufacturers. In addition to price, we believe that competition in this industry is based largely on product quality, responsiveness to customer needs, product features and selection. Our North American competitors include American Woodmark Corporation and Fortune Brands Home & Security, Inc.

The raw materials used in this segment are primarily hardwood lumber, plywood and particleboard, and are available from multiple sources, both domestic and foreign.

Plumbing Products

The businesses in our Plumbing Products segment sell a wide variety of faucet, bathing and showering devices that are manufactured by or for us. The majority of our plumbing products are sold in North America and Europe under the brand names DELTA®, PEERLESS®, HANSGROHE®, AXOR®, BRIZO®, BRASSTECH®, BRISTAN™, GINGER®, NEWPORT BRASS and PLUMB SHOP®. Our products include single-handle and double-handle faucets, showerheads, handheld showers, valves, bathing units and toilets. These products are sold to major retail accounts and to wholesalers and distributors that, in turn, sell our products to plumbers, building contractors, remodelers, smaller retailers and others.

In 2013, we began the process of integrating our plumbing products sold under our AQUA GLASS® and AMERICAN SHOWER & BATH™ brands into the DELTA and PEERLESS brands. As a result of the integration, we exited the wholesale plumbing distribution channel for these bath products. Our

INNOVEX® and acrylic tub and shower systems, bath and shower enclosure units, shower trays and laundry tubs are now manufactured and sold under the Delta and Peerless, Aqua Glass, American Shower & Bath and MIROLIN® brand names. These products are sold primarily to home center retailers for home improvement and new home construction in North America, although the Mirolin products are also sold to wholesalers and distributors in Canada.

Our spas are manufactured and sold under HOT SPRING®, CALDERA® and other trademarks directly to independent dealers. Major competitors include Kohler, Aquatic, Maax and Jacuzzi. We sell HÜPPE® shower enclosures through wholesale channels in Europe. HERITAGE™ ceramic and acrylic bath fixtures and faucets are principally sold in the United Kingdom directly to select retailers.

Also included in our Plumbing Products segment are brass and copper plumbing system components and other plumbing specialties, which are sold to plumbing, heating and hardware wholesalers and to home center retailers, hardware stores, building supply outlets and other mass merchandisers. These products are marketed in North America for the wholesale trade under our BRASSCRAFT® and BRASSTECH® trademarks and for "do-it-yourself" consumers under our MASTER PLUMBER® and PLUMB SHOP® trademarks, and are also sold under private label.

We believe that our plumbing products are among the leaders in sales in North America and Europe, with American Standard, Kohler, Moen and Pfister as major competitors. We are also experiencing competition from foreign manufacturers, including GROHE, particularly in Germany, China and the Middle East. We face significant competition from private label products (including house brands sold by certain of our customers). Many of the faucet and showering products with which our products compete are manufactured by foreign manufacturers that are putting downward pressures on price, particularly in the emerging markets we are entering. The businesses in our Plumbing Products segment source products primarily from Asia and manufacture products in the United States, Europe and Asia. In addition to price, we believe that competition for our plumbing products is based largely on brand reputation, product quality, product innovation and features and breadth of product offering.

A substantial portion of our plumbing products contain brass, the major components of which are copper and zinc. We have multiple sources, both domestic and foreign, for the raw materials used in this segment, and sufficient raw materials have been available for our needs. We have encountered price volatility for brass, brass components and any components containing copper and zinc; therefore, we have implemented a hedging strategy to minimize the impact of this volatility. Federal legislation mandating a national standard for lead content in plumbing products used to convey drinking water became effective in January 2014. Faucet and water supply valve manufacturers, including our plumbing product companies, are required to obtain adequate supplies of lead-free brass or suitable alternative materials for continued production of faucets and certain of our other plumbing products. Our plumbing products that are affected by this legislation meet the federal standards. Our Delta Faucet business uses DIAMOND™ SEAL TECHNOLOGY, which reduces the number of potential leak points in a faucet, simplifies installation and satisfies legislation regarding the acceptable lead content in plumbing products.

Installation and Other Services

Our Installation and Other Services segment sells installed building products and distributes building products primarily for new home construction, and, to a lesser extent, retrofit and commercial construction, throughout the United States. In addition to insulation, we sell installed gutters, after-paint products, garage doors and fireplaces. The installation and distribution of insulation comprised approximately twelve percent, eleven percent and nine percent of our consolidated net sales in 2013, 2012 and 2011, respectively. Installed building products are supplied primarily to homebuilders by our network of branches located across the United States. Our distributed products include insulation, insulation accessories, gutters and roofing, among others. Distributed products are sold primarily to contractors and dealers (including lumber yards) from distribution centers in various parts of the United States.

In response to the economic downturn and resulting decline in new home construction, we expanded our ability to serve the residential retrofit and light commercial channels. Within the Installation and Other Services segment, we have several initiatives related to improved residential energy efficiency, including retrofit installation services (primarily insulation) delivered directly to homeowners and traditional remodeler contractors, as well as through retailers and dealer outlets.

In addition to price, we believe that competition in this industry is based largely on customer service and the quality of installation service. We believe that we are a leading provider of installed insulation in the new home construction industry in the United States. Our competitors include several regional contractors, as well as numerous local contractors and lumber yards. We believe that our capabilities and financial resources are substantial compared to regional and local contractors.

We procure the materials used by this segment, primarily insulation, from multiple sources.

Decorative Architectural Products

We produce architectural coatings including paints, primers, specialty paint products, stains and waterproofing products. The products are sold in the United States, Canada, China, Mexico and South America under the brand names BEHR® and KILZ® to "do-it-yourself" and professional customers through home centers, paint stores and other retailers. Net sales of architectural coatings comprised approximately 21 percent in 2013 and approximately 20 percent of our consolidated net sales in each of 2012 and 2011. Our competitors include large national and international brands such as Benjamin Moore, Glidden, Olympic, Sherwin-Williams, Valspar and Zinsser, as well as many regional and other national brands. In addition to price, we believe that competition in this industry is based largely on product quality, technology and product innovation, customer service and brand reputation. In 2013, Behr introduced MARQUEE™ exterior paint with enhanced stain-blocking and fade-resistant properties, and PREMIUM DECKOVER™, a deck resurfacing product which conceals cracks and splinters in wood surfaces and helps to create a slip-resistant finish for decks.

Our BEHR products are principally sold through The Home Depot, this segment's and our largest customer. The loss of this segment's sales to The Home Depot would have a material adverse effect on this segment's business and on our consolidated business as a whole.

Titanium dioxide is a major ingredient in the manufacture of paint. The price for titanium dioxide can fluctuate as a result of surges in global demand and production capacity limitations, which can impact our operating results in this segment. Petroleum products are also used in the manufacture of architectural coatings. Significant increases in the cost of crude oil and natural gas lead to higher raw material costs (e.g., for resins, solvents and packaging, as well as titanium dioxide), which can adversely affect the segment's results of operations. We have agreements with the significant suppliers of the major raw materials used in this segment which are intended to help assure continued availability.

Our Decorative Architectural Products segment also includes LIBERTY® and BRAINERD® branded cabinet, door, window and other hardware, which is manufactured for us and sold to home centers, other retailers, original equipment manufacturers and wholesalers. Key competitors in North America include Amerock, Top Knobs and house brands. Decorative bath hardware and shower accessories are sold under the brand names DELTA®, FRANKLIN BRASS® and DECOR BATHWARE® to distributors, home centers and other retailers. Competitors include Moen, Gatco and house brands sold by certain of our customers.

Other Specialty Products

We manufacture and sell vinyl, fiberglass and aluminum windows and patio doors, as well as the ESSENCE SERIES® windows and doors, which combines a wood interior with a fiberglass exterior, under the MILGARD® brand name for home improvement and new home construction, principally in the western United States. MILGARD products are sold primarily through dealers and, to a lesser extent,

directly to production and custom homebuilders and through lumber yards and home centers. This segment's competitors in North America include national brands, such as Jeld-Wen, Marvin, Pella and Andersen, and numerous regional brands.

In the United Kingdom, we manufacture and sell windows, related products and components under several brand names including GRIFFIN™, PREMIER™ and DURAFLEX™. Sales are primarily through dealers and wholesalers to the repair and remodeling markets, although our DURAFLEX products are also sold to other window fabricators. United Kingdom competitors include many small and mid-sized firms and a few large, vertically integrated competitors.

In addition to price, we believe that competition in this industry in both the domestic and foreign markets is based largely on customer service, product quality and brand reputation.

We manufacture and sell a complete line of manual and electric staple gun tackers, staples and other fastening tools under the brand names ARROW® and POWERSHOT®. We sell these products through various distribution channels including home centers and other retailers and wholesalers. Our principal North American competitor in this product line is Stanley Black & Decker.

The raw materials used in this segment have been available from multiple sources.

Additional Information

We hold U.S. and foreign patents, patent applications, licenses, trademarks, trade names, trade secrets and proprietary manufacturing processes. As a manufacturer and distributor of brand name products, we view our trademarks and other intellectual property rights as important, but do not believe that there is any reasonable likelihood of a loss of such rights that would have a material adverse effect on our present business as a whole.

We are subject to U.S. and foreign government regulations, particularly those pertaining to health and safety (including protection of employees and consumers), climate disruption and environmental issues. In addition to our responsibilities for environmental remediation, our businesses are subject to other requirements regarding protection of the environment and worker health and safety. Our businesses are subject to requirements relating to the emission of volatile organic compounds which may impact our sourcing of particleboard, require that we install special equipment in manufacturing facilities or that we reformulate paint products. As described above, our Plumbing Products segment is subject to restrictions on lead content in some of its products. Compliance with such laws and regulations could significantly affect product performance as well as our production costs. We monitor applicable laws and regulations relating to the protection of the environment, climate disruption and worker health and safety, and incur ongoing expense relating to compliance. We do not expect compliance with the federal, state and local regulations relating to the discharge of materials into the environment, or otherwise relating to the protection of the environment and worker health and safety, will result in material capital expenditures or have a material adverse effect on our earnings or competitive position.

We do not consider backlog orders to be material in any of our segments.

At December 31, 2013, we employed approximately 32,000 people. We have generally experienced satisfactory relations with our employees.

Available Information

Our website is www.masco.com. Our periodic reports and all amendments to those reports required to be filed or furnished pursuant to Section 13(a) or Section 15(d) of the Securities Exchange Act of 1934 are available free of charge through our website as soon as reasonably practicable after those reports are electronically filed with or furnished to the Securities and Exchange Commission. This Report is being posted on our website concurrently with its filing with the Securities and Exchange Commission. Material contained on our website is not incorporated by reference into this Report.

**

There are a number of business risks and uncertainties that could affect our business. These risks and uncertainties could cause our actual results to differ from past performance or expected results. We consider the following risks and uncertainties to be most relevant to our specific business activities. Additional risks and uncertainties not presently known to us, or that we currently believe to be immaterial, also may adversely impact our business, financial condition and results of operations.

A significant portion of our business relies on home improvement and new home construction activity, both of which are cyclical.

A significant portion of our business relies on home improvement, including spending on repair and remodeling projects, and new home construction activity, principally in North America and Europe. Macroeconomic conditions including consumer confidence levels, fluctuations in home prices, unemployment and underemployment levels, and the availability of home equity loans and mortgages and the interest rates for such loans, affect both consumers' discretionary spending on home improvement projects as well as new home construction activity. Adverse changes or uncertainty regarding these macroeconomic conditions could result in a decline in spending on home improvement projects and a decline in demand for new home construction, both of which could adversely affect our results of operations and our financial position. While improving, both new home construction and consumer spending for big ticket remodeling projects continues to be well below historic average levels, which affect our results of operations.

If we do not maintain strong brands or respond to changing consumer preferences and purchasing practices, we could lose share and our results could be adversely affected.

Our competitive advantage is due, in part, to our ability to maintain our strong brands and to develop and introduce innovative new and improved products. While we continue to invest in brand building and brand awareness, these initiatives may not be successful. The uncertainties associated with developing and introducing new and improved products, such as gauging changing consumer preferences and successfully developing, manufacturing, marketing and selling these products, may impact the success of our product introductions. If we do not introduce new or improved products in a timely manner or if these products do not gain widespread acceptance, we could lose share, which could negatively impact our operating results.

The volatile and challenging economic environment of recent years has caused shifts in consumer preferences and purchasing practices and changes in the business models and strategies of our customers. For example, consumers are increasingly using the internet and mobile technology to research home improvement products and to inform and enhance their purchasing and ownership experience for these products, particularly with consumer-initiated messaging. E-business is a rapidly developing area, and development of a successful e-business strategy involves significant time, investment and resources. If we are unable to successfully execute our e-business strategy, our brands may lose share.

Similarly, the quantity, type and prices of products demanded by consumers and our customers have shifted. For example, demand has increased for multi-family housing units such as apartments and condominiums, which typically have smaller kitchens and smaller and fewer bathrooms, each with fewer cabinets and faucets, as well less insulation, than single-family houses. While the economy is recovering, we are experiencing growth in certain channels for lower price point products. These shifts have negatively impacted our sales and/or our profitability, and it is uncertain whether these shifts represent long-term changes in consumer preferences.

If we do not timely and effectively identify and respond to these changing consumer preferences and purchasing practices, our relationships with our customers and with consumers could be harmed, the

demand for our brands and products could be reduced and our results of operations could be negatively affected.

Our actions to improve our underperforming businesses have been costly and may not yield all of the anticipated benefits.

The downturn in home improvement and new home construction activity during the recent recession impacted our results, particularly in our Cabinets and Related Products and Installation and Other Services segments and certain businesses in our Plumbing Products segment. In response, we implemented initiatives to reduce costs and increase sales; however, there is no assurance that our efforts will yield all of the anticipated benefits. Our cost-saving initiatives, including rationalizing our businesses, closing plants and reducing headcount have been complex, time-consuming and expensive. The consolidation of our North American Cabinet businesses, in particular, has involved the integration of multiple manufacturing processes and information technology platforms. While we have experienced positive results from these initiatives, there is no assurance that these benefits will continue.

Our strategy to increase our sales in the Cabinets and Related Products segment through brand building and new product introductions requires time to develop, implement and assess. Further, this segment faces pricing pressures, competition from low-cost manufacturers and a shift in the mix of products in certain channels to more value-priced products. If we cannot successfully implement these initiatives or respond to these changing market dynamics, our results of operations may continue to be negatively impacted.

Further, if the economy recovers faster than expected, we may not be able to increase our manufacturing and installation capacity to support demand, which could result in lost share and, ultimately, could negatively impact our operating results.

Our sales are concentrated with two significant customers.

The size and importance of individual customers to our businesses continues to increase. In 2013, sales to our largest customer, The Home Depot, were $2.3 billion (approximately 28 percent of consolidated net sales). Lowe's is our second largest customer. In 2013, sales to Lowe's were less than ten percent of our consolidated net sales. These home center customers may reduce the number of vendors they purchase from and can make significant changes in their volume of purchases. Additionally, home centers can significantly affect the prices we receive for our products and services, our cost of doing business with them and the terms and conditions on which we do business. Although homebuilders, dealers and other retailers represent other channels of distribution for our products and services, the loss of a substantial portion of our sales to The Home Depot or the loss of our sales to Lowe's would have a material adverse effect on our business.

Further, as some of our customers expand their markets and their targeted customers, conflicts between our existing distribution channels have and will continue to occur, which could impact our results of operations. In addition, we may undermine the business relationships we have with our current customers if we increase the amount of business we transact directly with consumers. In addition, our large retail customers are increasingly requesting product exclusivity, which may affect our ability to offer products to other customers and may diminish our ability to leverage economies of scale.

We face significant competition.

Our products and services face significant competition. We believe that we compete on the basis of price, product and service quality, brand reputation, customer service and product features and innovation. Home centers continue to purchase select products in our segments directly from low-cost foreign manufacturers for sale as private label and house brand merchandise. Additionally, home

centers, which have historically concentrated their sales efforts on retail consumers and remodelers, are increasingly marketing directly to professional contractors and installers, which may impact our margins on our products that contractors and installers would otherwise buy through our dealers and wholesalers.

In our other distribution channels, we compete with foreign manufacturers in a variety of our product groups. These foreign manufacturers are putting downward pressures on price, particularly in the emerging markets we are entering. In some of our segments, we are experiencing a shift in the mix of products we sell toward more value-priced or opening price point products, which may impact our ability to maintain or gain share and our profitability.

Our ability to maintain our competitive position in our industries and to grow our businesses depends upon successfully maintaining our relationships with major customers, implementing growth strategies and entering new geographic areas, including successful international penetration, developing a successful e-business strategy, maintaining strong brands, managing our cost structure, accommodating shorter life-cycles for our products, and developing and innovating products, none of which is assured.

If we experience increased commodity costs or limited availability of commodities, our operating results could be negatively impacted.

We buy various commodities to manufacture our products, including, among others, wood, brass (made of copper and zinc), titanium dioxide and resins. Fluctuations in the availability and prices of these commodities could increase our costs to manufacture our products. Further, increases in energy costs could increase our production costs as well as our transportation costs, each of which could negatively affect our financial condition and operating results.

It has been, and likely will continue to be, difficult for us to pass on to customers cost increases to cover our increased commodity and production costs. Our existing arrangements with customers, competitive considerations and customer resistance to price increases may delay or make us unable to adjust selling prices. If we are not able to increase the prices of our products or achieve cost savings to offset increased commodity and production costs, our financial condition and operating results could be negatively impacted. If we are able to increase our selling prices, sustained price increases for our products may lead to sales declines and loss of share, particularly if our competitors do not increase their prices. When commodity prices decline, we may receive pressure from our customers to reduce our prices.

To minimize price volatility associated with certain anticipated commodity purchases, we use derivative instruments, including commodity futures and swaps. This strategy may increase the possibility that we may make commitments to purchase these commodities at prices that subsequently exceed their market prices, which could adversely affect our financial condition and operating results.

We are dependent on third-party suppliers and manufacturers, and the loss of a key supplier or manufacturer could negatively affect our operating results.

Our ability to offer a wide variety of products depends on our ability to obtain an adequate supply of products and components from manufacturers and other suppliers. We rely heavily or, in certain cases, exclusively, on third-party suppliers for some of our products and key components. Failure by our suppliers to provide us quality products on commercially reasonable terms, or to comply with applicable legal requirements, could have a material adverse effect on our financial condition or operating results. Resourcing these products and components to another supplier could take time and involve significant costs. Accordingly, the loss of a key supplier, or a substantial decrease in the availability of products or components from our suppliers, could disrupt our business and adversely impact our operating results.

Further, we manufacture products in Asia and source products and components from third parties in Asia. The distances involved in these arrangements, together with differences in business practices,

shipping and delivery requirements, the limited number of suppliers, and laws and regulations, have increased the complexity of our supply chain logistics and the potential for interruptions in our production scheduling. If we are unable to effectively manage our supply chain, our operating results could be negatively affected.

International political, monetary, economic and social developments affect our business.

Approximately 20 percent of our sales are made outside of North America (principally in Europe) and are transacted in currencies other than U.S. dollars (principally the Euro and the British pound sterling). Increased international sales make up an important part of our future strategic plans. In addition, we manufacture products in Asia and source products, components and raw materials from third parties in Asia. We face risks associated with changes in political, monetary, economic and social environments, labor conditions and practices, the laws, regulations and policies of foreign governments, cultural differences and differences in enforcement of contract and intellectual property rights. U.S. laws and regulations affecting activities of U.S. companies doing business abroad, including tax laws, laws regulating various business practices, and trade regulations which may include duties and tariffs can also impact us. Our international operating results may also be influenced by economic conditions in Europe. The financial reporting of our consolidated operating results is affected by fluctuations in currency exchange rates, which may present challenges in comparing operating performance from period to period.

The long-term performance of our businesses relies on our ability to attract, develop and retain talented personnel.

To be successful, we must attract, develop and retain highly qualified and talented personnel who have the experience, knowledge and expertise to successfully implement our key business strategies. We compete for employees with a broad range of employers in many different industries, including large multinational firms, and we invest significant resources in recruiting, developing, motivating and retaining them. The failure to attract and retain key employees, or to develop effective succession planning to assure smooth transitions of those employees and the knowledge and expertise they possess, could negatively affect our competitive position and our operating results. Further, as the economy continues to recover, if we are unable to recruit, train and retain sufficient skilled labor, we may not be able to adequately satisfy increased demand for our products and services, which could impact our operating results.

Claims and litigation could be costly.

We are, from time to time, involved in various claims, litigation matters and regulatory proceedings that arise in the ordinary course of our business and which could have a material adverse effect on us. These matters may include contract disputes, automobile liability and other personal injury claims, warranty disputes, environmental claims or proceedings, other tort claims, employment and tax matters and other proceedings and litigation, including class actions.

We are subject to product safety regulations, recalls and direct claims for product liability that can result in significant liability and, regardless of the ultimate outcome, can be costly to defend or manage. Also, we rely on other manufacturers to provide us with products or components for products that we sell. Due to the difficulty of controlling the quality of products or components sourced from other manufacturers, we are exposed to risks relating to the quality of such products and to limitations on our recourse against such suppliers.

We have also experienced class action lawsuits in recent years predicated upon claims for antitrust violations, product liability and wage and hour issues. We have generally denied liability and have vigorously defended these cases. Due to their scope and complexity, however, these lawsuits can be

particularly costly to defend and resolve, and we have and may continue to incur significant costs as a result of these types of lawsuits.

Our homebuilder customers are subject to construction defect and home warranty claims in the ordinary course of their business. Our contractual arrangements with these customers may include our agreement to defend and indemnify them against various liabilities. These claims, often asserted several years after completion of construction, can result in complex lawsuits or claims against the homebuilders and many of their subcontractors, including us, and may require us to incur defense and indemnity costs even when our products or services are not the principal basis for the claims.

Although we intend to defend all claims and litigation matters vigorously, given the inherently unpredictable nature of claims and litigation, we cannot predict with certainty the outcome or effect of any claim or litigation matter.

We maintain insurance against some, but not all, of these risks of loss resulting from claims and litigation. We may elect not to obtain insurance if we believe the cost of available insurance is excessive relative to the risks presented. The levels of insurance we maintain may not be adequate to fully cover any and all losses or liabilities. If any significant accident, judgment, claim or other event is not fully insured or indemnified against, it could have a material adverse impact on our business, financial condition and results of operations.

See Note U to the consolidated financial statements included in Item 8 of this Report for additional information about litigation involving our businesses.

If we are required to take additional significant non-cash charges, our financial resources could be reduced and our financial flexibility may be negatively affected.

We have recorded significant goodwill and other intangible assets related to prior business combinations on our balance sheet. The valuation of these assets is largely dependent upon the expectations for future performance of our businesses. In recent years, we have recorded significant non-cash impairment charges for financial investments, goodwill and other intangible assets. While new home construction and home improvement activity are improving, the extent of the recovery remains uncertain.

Expectations about the recovery may impact whether we are required to recognize additional non-cash, pre-tax impairment charges for goodwill and other indefinite-lived intangible assets or other long-lived assets. If the value of our goodwill or other intangible assets is further impaired, our earnings and shareholders' equity would be adversely affected.

We have also recorded a valuation allowance related to our deferred tax assets. A return to sustainable profitability in our U.S. operations is required before we would change our judgment regarding the need for this valuation allowance. While we believe that we may reverse all or a portion of the valuation allowance as early as the second half of 2014, this is not assured. Until such time, the profits from our U.S. operations will be offset by the net operating loss carryforward, resulting in a lower U.S. effective tax rate than we would normally incur.

Further, our credit agreement contains financial covenants we must comply with, including covenants regarding limits on our debt to total capitalization ratio. If we are required to record additional non-cash impairment charges, our shareholders' equity would be reduced, and our borrowing capacity under our credit agreement may be limited. In the past we have negotiated amendments to our credit agreement to allow for the add-back to shareholders' equity for impairment charges we have taken. There can be no assurance that in the future we would be able to further amend our credit agreement, that alternative financing would be available on acceptable terms and at acceptable rates, or that we would be permitted to obtain alternative financing under the terms of our existing financing arrangements.

Compliance with government regulation and industry standards could impact our capital expenditures and operating results.

We are subject to U.S. and foreign government regulations, particularly those pertaining to health and safety (including protection of employees and consumers), climate disruption and environmental issues. In addition to complying with current requirements and requirements that will become effective at a future date, even more stringent requirements could be imposed on our industries in the future. Additionally, some of our products must be certified by industry organizations. Compliance with these regulations and industry standards may require us to alter our manufacturing and installation processes and our sourcing, which could adversely impact our competitive position. Further, if we do not effectively and timely comply with such regulations and industry standards, our operating results could be negatively affected.

**

None.

**

The table below lists our principal North American properties for segments other than Installation and Other Services.

Most of our North American facilities range from single warehouse buildings to complex manufacturing facilities. We own most of our North American manufacturing facilities, none of which are subject to significant encumbrances. A substantial number of our warehouse and distribution facilities are leased.

Our Installation and Other Services segment operates approximately 190 installation branch locations and approximately 70 distribution centers in the United States, most of which are leased.

The table below lists our principal properties outside of North America.

Most of our international facilities are located in China, Germany and the United Kingdom. We own most of our international manufacturing facilities, none of which are subject to significant encumbrances. A substantial number of our international warehouse and distribution facilities are leased.

Our corporate headquarters are located in Taylor, Michigan and are owned by us. We own an additional building near our corporate headquarters that is used by our Masco Technical Services (research and development) department. We continue to lease an office facility in Luxembourg which serves as a headquarters for most of our foreign operations.

Each of our operating divisions assesses the manufacturing, distribution and other facilities needed to meet its operating requirements. Our buildings, machinery and equipment have been generally well maintained and are in good operating condition. We believe our facilities have sufficient capacity and are adequate for our production and distribution requirements.

**

Information regarding legal proceedings involving us is set forth in Note U to our consolidated financial statements included in Item 8 of this Report and is incorporated herein by reference.

**

Not applicable.

**PART II **

**

The New York Stock Exchange is the principal market on which our common stock is traded. The following table indicates the high and low sales prices of our common stock as reported by the New York Stock Exchange and the cash dividends declared per common share for the periods indicated:

On January 31, 2014, there were approximately 4,779 holders of record of our common stock.

We expect that our practice of paying quarterly dividends on our common stock will continue, although the payment of future dividends is at the discretion of our Board of Directors and will depend upon our earnings, capital requirements, financial condition and other factors.

Performance Graph

The table below compares the cumulative total shareholder return on our common stock with the cumulative total return of (i) the Standard & Poor's 500 Composite Stock Index ("S&P 500 Index"), (ii) The Standard & Poor's Industrials Index ("S&P Industrials Index") and (iii) the Standard & Poor's Consumer Durables & Apparel Index ("S&P Consumer Durables & Apparel Index"), from December 31, 2008 through December 31, 2013, when the closing price of our common stock was $22.77. The graph assumes investments of $100 on December 31, 2008 in our common stock and in each of the three indices and the reinvestment of dividends.

The table below sets forth the value, as of December 31 for each of the years indicated, of a $100 investment made on December 31, 2008 in each of our common stock, the S&P 500 Index, the S&P Industrials Index and the S&P Consumer Durables & Apparel Index and includes the reinvestment of dividends.

In July 2007, our Board of Directors authorized the purchase of up to 50 million shares of our common stock in open-market transactions or otherwise. At December 31, 2013, we had remaining authorization to repurchase up to 22.6 million shares. During the first quarter of 2013, we repurchased and retired 1.7 million shares of our common stock, for cash aggregating $35 million to offset the dilutive impact of the 2013 grant of 1.7 million shares of long-term stock awards. We have not purchased any shares since March 2013.

**

(1)

Amounts exclude discontinued operations.

(2)

The year 2012 includes non-cash impairment charges for other intangible assets aggregating $27 million after tax ($42 million pre-tax).

(3)

The year 2011 includes non-cash impairment charges for goodwill and other intangible assets aggregating $291 million after tax ($450 million pre-tax).

(4)

The year 2010 includes non-cash impairment charges for goodwill and other intangible assets aggregating $586 million after tax ($698 million pre-tax). The year 2010 also includes a valuation allowance on U.S. deferred tax assets of $372 million.

(5)

The year 2009 includes non-cash impairment charges for goodwill aggregating $180 million after tax ($262 million pre-tax).

**

The financial and business analysis below provides information which we believe is relevant to an assessment and understanding of our consolidated financial position, results of operations and cash flows. This financial and business analysis should be read in conjunction with the consolidated financial statements and related notes.

The following discussion and certain other sections of this Report contain statements reflecting our views about our future performance and constitute "forward-looking statements" under the Private Securities Litigation Reform Act of 1995. Forward-looking statements can be identified by words such as "anticipate," "intend," "plan," "believe," "estimate," "expect," "assume," "seek," "appear," "may," "should," "will," "forecast" and similar references to future periods. These views involve risks and uncertainties that are difficult to predict and, accordingly, our actual results may differ materially from the results discussed in such forward-looking statements. We caution you against relying on any of these forward-looking statements. In addition to the various factors included in the "Executive Level Overview," "Critical Accounting Policies and Estimates" and "Outlook for the Company" sections, our future performance may be affected by our reliance on new home construction and home improvement, our reliance on key customers, the cost and availability of raw materials, shifts in consumer preferences and purchasing practices, our ability to improve our underperforming businesses and our ability to maintain our competitive position in our industries. These and other factors are discussed in detail in Item 1A "Risk Factors" of this Report. Any forward-looking statement made by us speaks only as of the date on which it was made. Factors or events that could cause our actual results to differ may emerge from time to time, and it is not possible for us to predict all of them. Unless required by law, we undertake no obligation to update publicly any forward-looking statements as a result of new information, future events or otherwise.

Executive Level Overview

We manufacture, distribute and install home improvement and building products. These products are sold for home improvement and new home construction through mass merchandisers, hardware stores, home centers, homebuilders, distributors and other outlets for consumers and contractors and direct to the consumer.

2013 Results. Net sales were positively affected by increased new home construction and repair and remodel activity in the U.S. and Europe. Our results of operations were positively affected by increased sales volume and the related absorption of fixed costs, as well as a more favorable relationship between selling prices and commodity costs. Also, all of our businesses were positively affected by the benefits associated with the business rationalizations and process improvement initiatives that we have implemented over the last several years.

Our Cabinets and Related Products segment was affected by increased sales volume and selling prices, partially offset by a less favorable product mix. Our Plumbing Products segment results were favorably affected by increased sales volume and increased selling prices of our North American and International operations, partially offset by the loss of a portion of our bath products business. The Decorative Architectural Products segment was affected by increased sales volume, partially offset by a less favorable relationship between selling prices and commodity costs. The Installation and Other Services and Other Specialty Products segments were positively affected by increased sales volume and increased selling prices.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America ("GAAP"). The preparation of these financial statements requires us to make certain estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of any contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods. We regularly review our estimates and assumptions, which are based upon historical experience, as well as current economic conditions and various other factors that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of certain assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates and assumptions.

We believe that the following critical accounting policies are affected by significant judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition and Receivables

We recognize revenue as title to products and risk of loss is transferred to customers or when services are rendered. We record revenue for unbilled services performed based upon estimates of material and labor incurred in the Installation and Other Services segment; such amounts are recorded in Receivables. We record estimated reductions to revenue for customer programs and incentive offerings, including special pricing and co-operative advertising arrangements, promotions and other volume-based incentives. We maintain allowances for doubtful accounts receivable for estimated losses resulting from the inability of customers to make required payments. In addition, we monitor our customer receivable balances and the credit worthiness of our customers on an on-going basis. During downturns in our markets, declines in the financial condition and creditworthiness of customers impact the credit risk of the receivables involved and we have incurred bad debt expense related to customer defaults. Our bad debt expense was $8 million, $14 million and $12 million for the years ended December 31, 2013, 2012 and 2011, respectively.

Inventories

We record inventories at the lower of cost or net realizable value, with expense estimates made for obsolescence or unsaleable inventory equal to the difference between the recorded cost of inventories and their estimated market value based upon assumptions about future demand and market conditions. On an on-going basis, we monitor these estimates and record adjustments for differences between estimates and actual experience. Historically, actual results have not significantly deviated from those determined using these estimates.

Financial Investments

We follow accounting guidance that defines fair value, establishes a framework for measuring fair value and expands disclosures about fair value measurements for our financial investments and liabilities. This guidance defines fair value as "the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date." Further, it defines a fair value hierarchy, as follows: Level 1 inputs as quoted prices in active markets for identical assets or liabilities; Level 2 inputs as observable inputs other than Level 1 prices, such as quoted market prices for similar assets or liabilities or other inputs that are observable or can be corroborated by market data; and Level 3 inputs as unobservable inputs that are supported by little or no market activity and that are financial instruments whose value is determined using pricing models or instruments for which the determination of fair value requires significant management judgment or estimation.

If applicable, we record investments in available-for-sale securities at fair value, and unrealized gains or losses (that are deemed to be temporary) are recognized, net of tax effect, through shareholde

Showing the first 8K of 80K characters. Open the full section

**

We have considered the provisions of accounting guidance regarding disclosure of accounting policies for derivative financial instruments and derivative commodity instruments, and disclosure of quantitative and qualitative information about market risk inherent in derivative financial instruments, other financial instruments and derivative commodity instruments.

We are exposed to the impact of changes in interest rates, foreign currency exchange rates and commodity costs in the normal course of business and to market price fluctuations related to our financial investments. We have involvement with derivative financial instruments and use such instruments to the extent necessary to manage exposure to foreign currency fluctuations and commodity fluctuations. See Note F to the consolidated financial statements for additional information regarding our derivative instruments.

At December 31, 2013, we performed sensitivity analyses to assess the potential loss in the fair values of market risk sensitive instruments resulting from a hypothetical change of 10 percent in foreign currency exchange rates, a 10 percent decline in the market value of our long-term investments, a 10 percent change in commodity costs, or a 10 percent change in interest rates. Based upon the analyses performed, such changes would not be expected to materially affect our consolidated financial position, results of operations or cash flows.

**

Management's Report on Internal Control Over Financial Reporting

The management of Masco Corporation is responsible for establishing and maintaining adequate internal control over financial reporting. Masco Corporation's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America.

The management of Masco Corporation assessed the effectiveness of the Company's internal control over financial reporting as of December 31, 2013 based on the 1992 framework established by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in "Internal Control – Integrated Framework." Based on this assessment, management has determined that the Company's internal control over financial reporting was effective as of December 31, 2013.

PricewaterhouseCoopers LLP, an independent registered public accounting firm, performed an audit of the Company's consolidated financial statements and of the effectiveness of Masco Corporation's internal control over financial reporting as of December 31, 2013. Their report expressed an unqualified opinion on the effectiveness of Masco Corporation's internal control over financial reporting as of December 31, 2013 and expressed an unqualified opinion on the Company's 2013 consolidated financial statements. This report appears under 'Item 8. Financial Statements and Supplementary Data' under the heading "Report of Independent Registered Public Accounting Firm."

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of Masco Corporation:

In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a) (1) present fairly, in all material respects, the financial position of Masco Corporation and its subsidiaries at December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2013 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2013, based on criteria established in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company's management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management's Report on Internal Control over Financial Reporting appearing under Item 8. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company's internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PricewaterhouseCoopers LLP

PricewaterhouseCoopers LLP Detroit, Michigan February 14, 2014

** Financial Statements and Supplementary Data

MASCO CORPORATION and Consolidated Subsidiaries

CONSOLIDATED BALANCE SHEETS

at December 31, 2013 and 2012 **

Showing the first 8K of 171K characters. Open the full section

Not applicable.

a.

Evaluation of Disclosure Controls and Procedures.

The Company, with the participation of the Chief Executive Officer and Chief Financial Officer, conducted an evaluation of its disclosure controls and procedures as required by Exchange Act Rules 13a-15(b) and 15d-15(b) as of December 31, 2013. Based on this evaluation, the Company's management, including the Chief Executive Officer and Chief Financial Officer, concluded that the Company's disclosure controls and procedures were effective.

b.

Management's Report on Internal Control over Financial Reporting.

Management's report on the Company's internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) is included in this Report under Item 8. Financial Statements and Supplementary Data, under the heading, "Management's Report on Internal Control over Financial Reporting" and is incorporated herein by reference. The report of our independent registered public accounting firm is also included under Item 8, under the heading, "Report of Independent Registered Public Accounting Firm" and is incorporated herein by reference.

c.

Changes in Internal Control over Financial Reporting.

In connection with the evaluation of the Company's "internal control over financial reporting" that occurred during the quarter ended December 31, 2013, which is required under the Securities Exchange Act of 1934 by paragraph (d) of Exchange Rules 13a-15 or 15d-15 (as defined in paragraph (f) of Rule 13a-15), management determined that there was no change that materially affected or is reasonably likely to materially affect internal control over financial reporting.

Not applicable.

**PART III **

**

Our Code of Business Ethics applies to all employees, officers and directors including our Principal Executive Officer, Principal Financial Officer and Principal Accounting Officer, and is posted on our website at www.masco.com. Other information required by this Item will be contained in our definitive Proxy Statement for the 2014 Annual Meeting of Stockholders, to be filed on or before April 30, 2014, and such information is incorporated herein by reference.

**

Information required by this Item will be contained in our definitive Proxy Statement for the 2014 Annual Meeting of Stockholders, to be filed on or before April 30, 2014, and such information is incorporated herein by reference.

**

Equity Compensation Plan Information

We grant equity under our 2005 Long Term Stock Incentive Plan (the "2005 Plan"). The following table sets forth information as of December 31, 2013 concerning the 2005 Plan, which was approved by our stockholders. We do not have any equity compensation plans that have not been approved by our stockholders.

The remaining information required by this Item will be contained in our definitive Proxy Statement for our 2014 Annual Meeting of Stockholders, to be filed on or before April 30, 2014, and such information is incorporated herein by reference.

**

Information required by this Item will be contained in our definitive Proxy Statement for the 2014 Annual Meeting of Stockholders, to be filed on or before April 30, 2014, and such information is incorporated herein by reference.

**

Information required by this Item will be contained in our definitive Proxy Statement for the 2014 Annual Meeting of Stockholders, to be filed on or before April 30, 2014, and such information is incorporated herein by reference.

**PART IV **

**

a. Listing of Documents.

(1)

Financial Statements. Our consolidated financial statements included in Item 8 hereof, as required at December 31, 2013 and 2012, and for the years ended December 31, 2013, 2012 and 2011, consist of the following:

(2)

Financial Statement Schedule.

a.

Our Financial Statement Schedule appended hereto, as required for the years ended December 31, 2013, 2012 and 2011, consists of the following:

II. Valuation and Qualifying Accounts

(3)

Exhibits.

See separate Exhibit Index beginning on page 94.

**SIGNATURES **

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

February 14, 2014

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the date indicated.

**MASCO CORPORATION

SCHEDULE II. VALUATION AND QUALIFYING ACCOUNTS for the years ended December 31, 2013, 2012 and 2011 **

(a)

Deductions, representing uncollectible accounts written off, less recoveries of accounts written off in prior years.

(b)

Valuation allowance on deferred tax assets recorded primarily in other comprehensive income and paid in capital.

**EXHIBIT INDEX **