Nordson 10-K 2024-10-31

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

(Mark One)

For the fiscal year ended October 31, 2024

OR

For the transition period from to

Commission file number 0-7977

NORDSON CORPORATION

(Exact name of Registrant as specified in its charter)

Ohio

(State or other jurisdiction of incorporation or organization

28601 Clemens Road Westlake, Ohio

(Address of principal executive offices)

34-0590250

(I.R.S. Employer Identification No.)

44145

(Zip Code)

(440) 892-1580

(Registrant’s Telephone Number, including area code)

Securities registered pursuant to Section 12(g) of the Act:

None

Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No ☐

Indicate by check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No x

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ☐

Indicate by check mark whether the Registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit such files). Yes x No ☐

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act:

If an emerging growth company, indicate by check mark if the Registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act ☐

Indicate by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐ No ☒

The aggregate market value of Common Shares, no par value per share, held by nonaffiliates (based on the closing sale price on the Nasdaq Stock Market) as of April 30, 2024 was approximately $14,758,563,021.

There were 57,016,026 Common Shares outstanding as of November 30, 2024.

Documents incorporated by reference:

Portions of the Definitive Proxy Statement for the 2025 Annual Meeting of Shareholders - Part III of the Form 10-K

Nordson Corporation 2

Nordson Corporation 3

PART I

NOTE REGARDING AMOUNTS AND FISCAL YEAR REFERENCES

In this annual report, all amounts related to United States dollars and foreign currency and to the number of Nordson Corporation’s common shares, except for per share earnings and dividend amounts, are expressed in thousands unless otherwise indicated. Unless the context otherwise indicates, all references to “we,” “us,” “our,” or the “Company” mean Nordson Corporation.

Unless otherwise noted, all references to years relate to our fiscal year ending October 31.

General Description of Business

Nordson is an innovative precision technology company that leverages a scalable growth framework to deliver top tier growth with leading margins and returns. We engineer, manufacture and market differentiated products and systems used for precision dispensing, applying and controlling of adhesives, coatings, polymers, sealants, biomaterials, and other fluids, to test and inspect for quality, and to treat and cure surfaces and various medical products such as: catheters, cannulas, medical balloons and medical tubing. These products are supported with extensive application expertise and direct global sales and service. We serve a wide variety of consumer non-durable, consumer durable and technology end markets including packaging, electronics, medical, appliances, energy, transportation, precision agriculture, building and construction, and general product assembly and finishing.

Our strategy for long-term growth is based on solving customers’ needs globally. We were incorporated in the State of Ohio in 1954 and are headquartered in Westlake, Ohio. Our products are marketed through a network of direct operations in more than 35 countries. Consistent with this global strategy, approximately 67 percent of our revenues were generated outside the United States in 2024.

As of October 31, 2024, we had approximately 8,000 employees worldwide. Our principal manufacturing facilities are located in the United States, the People’s Republic of China, Germany, Ireland, Israel, Italy, Mexico, the Netherlands and the United Kingdom.

Corporate Purpose and Goals

We strive to be a vital, self-renewing, worldwide organization that, within the framework of ethical behavior and enlightened citizenship, grows and produces wealth for our customers, employees, shareholders and communities.

We operate for the purpose of creating balanced, long-term benefits for all of our constituencies.

We focus on long-term growth and returns. Each quarter, we may not produce increased sales, net income, or earnings per share, or exceed the comparative prior year's quarter. When short-term swings occur, we do not intend to alter our foundational objectives in efforts to mitigate the impact of these temporary occurrences.

In 2021, we launched the Ascend strategy, which is designed to deliver top tier revenue growth with leading margins and returns. Ascend is driven by three interconnected pillars: the NBS ("Nordson Business System") Next growth framework; Owner Mindset, our division-led organizational structure; and Winning Teams, our talent strategy. These three pillars are built upon the foundation of what makes Nordson special: our culture and our values.

The NBS Next growth framework, the heart of the Ascend strategy, uses data-based segmentation to identify our greatest opportunities for profitable growth and ensure we are investing our resources in those areas. Using data in a consistent and disciplined way, leaders across the Company are defining their strategic business priorities.

We drive organic growth by continually introducing new products and technology, providing high levels of customer service and support, capturing rapidly expanding opportunities in emerging geographies and leveraging existing technology into new applications. Additional growth comes through the acquisition of companies that have differentiated precision technology-based product portfolios, serve attractive high-growth end-markets applications and have a customer-centric business model. The primary goals of our acquisition strategy are to complement our current capabilities, diversify our business into new industry sectors with new customers and expand the scope of the solutions we can offer to our customers.

We strive to provide genuine customer satisfaction – it is the foundation upon which we continue to build our business.

Complementing our business strategy is the objective to provide opportunities for employee self-fulfillment, growth, security, recognition and equitable compensation. This goal is met through the Human Resources department’s facilitation of employee training, leadership training and the creation of on-the-job growth opportunities. The result is a highly qualified and

Nordson Corporation 4

professional global team capable of meeting corporate objectives. For more information, see "Human Capital Resources" below.

We recognize the value of employee participation in the planning process. Strategic and operating plans are developed by all divisions, resulting in a sense of ownership and commitment on the part of employees in accomplishing our objectives.

We are an equal opportunity employer.

At Nordson, we have a long and proud history of investing in the communities where we live and work. We are committed to contributing up to five percent of domestic pretax earnings to education, human welfare services and other charitable activities, particularly in communities where we have significant operations. Through the Nordson Corporation Foundation, we give back by providing grants to nonprofits in communities where we have facilities employing approximately 100 people. In recent years, we have extended our reach internationally through our 2:1 employee Matching Gifts, as well as community giving programs in ten international locations. Since 1989, we have donated more than $173 million to communities where we live and work. In addition, our employees volunteered more than 113,000 hours through our Time ‘N Talent and Dollars for Doers programs.

Principal Products and Uses

We are a diversified precision technology company that engineers, manufactures and markets differentiated products and systems used to dispense, apply and control adhesives, coatings, polymers, sealants, biomaterials, medical components, and other fluids, to test and inspect for quality, and to treat and cure surfaces. Our precision technology can be found in manufacturing facilities around the world producing a wide range of goods for consumer durable, consumer non-durable, medical and technology end markets. Equipment ranges from single-use components to manual, stand-alone units for low-volume operations to microprocessor-based automated systems for high-speed, high-volume production lines.

We market our products globally, primarily through a direct sales force, and also through qualified distributors and sales representatives. We have built a worldwide reputation for creativity and expertise in the design and engineering of high-technology application equipment that meets the specific needs of our customers. We create value for our customers by developing solutions that increase uptime, enable faster line speeds and reduce consumption of materials. We serve a broad customer base, both in terms of industries and geographic regions. In 2024, no single customer accounted for ten percent or more of our sales.

The following is a summary of the product lines and markets served by our operating segments:

Industrial Precision Solutions

This segment delivers proprietary dispensing and material processing technology, as well as measurement, inspection and control solutions to diverse end markets. Product line specific solutions reduce material consumption, increase line efficiency and enhance product quality and appearance. Technologies are used for processing polymers, inspection and measurement of food, tubing and films and dispensing adhesives, coatings, sealants and other materials. This segment primarily serves the consumer durables, non-durables, agriculture and industrial markets.

• Industrial Coatings – Automated and manual dispensing products and systems for cold materials, container coating, liquid finishing and powder coating, as well as ultraviolet equipment used primarily in curing and drying operations. Key strategic markets include beverage containers and food cans, electric battery, appliances, automotive, building and construction, composites, electronics and medical.

• Measurement and Control Solutions** – In-line measurement sensors, gauges and analyzers using near-infrared, laser, X-ray, optical and nucleonic technologies, as well as proprietary algorithms and software. These precision applications ensure quality and reliability within the customers’ manufacturing processes. Key strategic markets include consumer non-durable, film extrusion and converting, cable and tubing and energy storage.

• Nonwovens – Dispensing, coating and laminating systems for applying adhesives, lotions, liquids and fibers to disposable products and continuous roll goods. Key strategic markets include adult incontinence products, baby diapers and child-training pants, hygiene products and surgical drapes, gowns, shoe covers and face masks.

• Packaging** – Automated adhesive dispensing systems used in the rigid packaged goods industries. Key strategic markets include packaging for food and beverage, pharmaceutical and other consumer goods.

• Polymer Processing** – Components and systems used in the thermoplastic and biopolymer melt stream in extrusion, injection molding, compounding, polymerization and recycling processes. Key strategic markets include flexible packaging, electronics, medical, building and construction, transportation and aerospace, and general consumer goods.

Nordson Corporation 5

• Precision Agriculture** – Precision agriculture spraying solutions, including fluid components, such as nozzles, pumps and filters; smart components that measure and control the flow, quantity and location of dispensed fluid; and control systems that provide a greater variety of input and functionality to the customer. This broad product portfolio is supported by differentiated software and data capabilities.

• Product Assembly** – Dispensing, coating and laminating systems for the assembly of plastic, metal and wood products, for paper and paperboard converting applications and for the manufacturing of continuous roll goods. Key strategic markets include appliances, automotive components, building and construction materials, electronics, furniture, solar energy, and the manufacturing of bags, sacks, books, envelopes and folding cartons.

Medical and Fluid Solutions

This segment includes components and device solutions for medical, life science, high-tech industrial and other diverse end markets.

• Medical – Components and devices for minimally invasive interventional surgical procedures, including cannulas, catheters and medical balloons. Products also include proprietary single-use plastic components in medical applications, including biopharmaceutical, patient care/surgical and diagnostic systems.

• Fluid Management – Precision manual and semi-automated dispensers and highly engineered single-use plastic molded syringes, cartridges, tips and fluid connection components. Products are used within critical medical and industrial production processes and for applying and controlling the flow of adhesives, sealants and lubricants. Key strategic markets include electronics, industrial, medical and animal health.

Atrion Acquisition

On August 21, 2024, Nordson acquired Atrion Corporation, a Delaware corporation (“Atrion”), pursuant to the Agreement and Plan of Merger (the “Merger Agreement”), dated as of May 28, 2024, among Nordson, Alpha Medical Merger Sub, Inc., a Delaware corporation and a wholly owned subsidiary of Nordson (“Merger Sub”) and Atrion. Headquartered in Allen, Texas, Atrion is a manufacturer of proprietary medical products and generated approximately $169 million in annual revenue in 2023. Established in 1944, Atrion supports customers globally through three FDA registered U.S. Food and Drug Administration manufacturing facilities located in the United States. Atrion’s portfolio is included in the Company's Medical and Fluid Solutions segment. It consists of three key businesses that we believe will significantly expand Nordson’s addressable market in infusion and cardiovascular therapies:

• Halkey Roberts is a leader in infusion fluid delivery solutions, including single-use original equipment manufacturer ("OEM") medical components such as swabable needle free and pressure relief valves.

• Atrion Medical is a leading provider of OEM interventional inflation devices for balloon catheterization, stent deployment and fluid delivery in structural heart, ears, nose and throat and gastrointestinal procedures.

• Quest Medical’s highly differentiated myocardial protection devices and single-use consumables deliver real-time precise drug administration during cardiovascular surgery.

Advanced Technology Solutions

This segment integrates our proprietary product technologies into the progressive stages of a customer’s production processes, such as surface treatment, precisely controlled dispensing of material and pre- and post-dispense test and inspection to ensure quality. This segment predominantly serves customers in the electronics end markets.

• Electronics Systems** – Automated dispensing systems for high-speed, accurate application of a broad range of attachment, protection and coating fluids, and related gas plasma treatment systems for cleaning and conditioning surfaces prior to dispense. Key strategic markets include the breadth of the electronics industry manufacturing supply chain that produces semiconductor, printed circuit board assemblies and electronic components.

• Test and Inspection** – Bond testing and automated optical, acoustic microscopy and x-ray inspection systems used in the semiconductor and printed circuit board industries. Key strategic markets include mobile phones, tablets, personal computers, wearable technology, liquid crystal displays, micro hard drives, microprocessors, printed circuit boards, flexible circuits, micro mechanical systems and semiconductor packaging.

Manufacturing, Raw Materials and Other Resources

Our production operations include machining, molding and assembly. We manufacture specially designed parts and assemble components into finished equipment. Many components are made in standard modules that can be used in more than one product or in combination with other components for a variety of models. We have principal manufacturing operations and

Nordson Corporation 6

sources of supply in the United States in Ohio, Georgia, California, Colorado, Connecticut, Illinois, Michigan, Minnesota, Pennsylvania, Rhode Island, Tennessee, Florida, Texas, Alabama and Wisconsin; as well as in the People’s Republic of China, Germany, Ireland, India, Israel, Italy, Mexico, the Netherlands and the United Kingdom.

Principal materials used to make our products are metals and plastics, typically in sheets, bar stock, castings, forgings, tubing and pellets. We also purchase many electrical and electronic components, fabricated metal parts, high-pressure fluid hoses, packings, seals and other items integral to our products. Suppliers are competitively selected based on cost, quality and service. Most significant raw materials that we use are available through multiple sources. We purchase most raw materials and other components on the open market and rely on third parties to provide certain finished goods. While these items are generally available from multiple sources, the cost of products sold may be affected by changes in the market price of raw materials and tariffs on certain raw materials, particularly imports from China, as well as disruptions in availability of raw materials, components and sourced finished goods.

We monitor and investigate alternative suppliers and materials based on numerous attributes including quality, service, financial stability and price. We currently source raw materials and components from a number of suppliers, but our ongoing efforts to improve service and manage compliance requirements and the cost effectiveness of our products may result in a reduction in the number of our suppliers.

Senior operating management supervises an extensive quality control program for our equipment, machinery and systems, and manufacturing processes.

Natural gas, electricity and other fuels are our primary energy sources. However, standby capacity for alternative sources is available if needed.

We continue to see a stabilization of the global supply chain, improved lead times and lower inflation risk. We enhanced our risk mitigation and sourcing efforts as a result of the COVID-19 pandemic and geopolitical tensions. Logistics flows have improved, and global forwarding rates have returned closer to pre-pandemic levels, except for Asia-origin shipments, which continue to be more volatile. We continue to see moderate rate increases on parcel and domestic trucking activity.

Intellectual Property

We rely on a combination of intellectual property rights, including patents, trademarks, copyrights, trade secrets and contractual provisions to protect our intellectual property. Our worldwide intellectual property portfolio is strengthened through innovation and brand recognition, and our comprehensive approach for protection and enforcement. We enter into confidentiality and intellectual property agreements with our employees that require them to disclose any inventions created in the scope of employment, convey all rights to those inventions to us and restrict the distribution of proprietary information. Risk factors associated with our intellectual property are discussed in Item 1A, "Risk Factors."

We protect and promote our intellectual property portfolio and take those actions we deem appropriate to enforce our intellectual property rights and to defend our rights to sell our products both domestically and internationally. Although in the aggregate, our global portfolio of more than 2,100 granted and pending patents and more than 1,000 trademarks are valuable assets that are important to our operations, we believe that our competitive advantage is also largely attributable to the technical, marketing and sales competence and capabilities of our employees, rather than on any individual patent or trademark. Therefore, we do not consider the expiration or loss of any single patent, trademark or intellectual property right, to be material to our business as a whole.

Seasonal Variation in Business

Historically, the highest volume of sales occurs in the second half of the fiscal year due in large part to the timing of customers’ capital spending programs. Accordingly, fiscal first quarter sales volume is typically the lowest of the year due to timing of customers’ capital spending programs and customer holiday shutdowns.

Competitive Conditions

We operate in a competitive global marketplace and compete with many large, well-established and highly competitive manufacturers and service providers. Our business is affected by a range of macroeconomic conditions, including industry capacity changes, global competition and economic conditions in the U.S. and abroad, as well as fluctuations in currency exchange rates. Our equipment is sold in competition with a wide variety of alternative bonding, sealing, finishing, coating, processing, testing, inspecting and fluid control techniques. Potential uses for our equipment include any production processes that require preparation, modification or curing of surfaces; dispensing, application, processing or control of fluids and materials; or testing and inspecting for quality.

Nordson Corporation 7

Many factors influence our competitive position, including pricing, product quality and service. We maintain a leadership position in our business segments by delivering high-quality, innovative products and technologies, as well as global service and technical support. Working with customers to understand their processes and developing the application solutions that help them meet their production requirements also contributes to our leadership position. Our worldwide network of direct sales and technical resources also is a competitive advantage.

Compliance with Governmental Regulations

Our global operations are subject to a variety of federal, state, local and international laws, regulations and compliance obligations relating to the manufacturing, designing and servicing of highly complex products and solutions. Examples of such regulations include, but are not limited to, import and export controls, data privacy, environmental, product safety, corruption, bribery, employment and labor. To support our policy of compliance in every jurisdiction we do business, we have robust internal controls, quality management systems, and management systems of compliance that govern our internal actions and mitigate our risk of non-compliance. We also have safeguards established to identify non-compliance concerns through internal and external audits and risk assessments, as well as an ethics helpline reporting system. The following describes certain significant regulations that may impact our business. For additional information about the risks associated with these laws and regulations, see Part I, Item 1A, "Risk Factors."

We transact with customers and suppliers in numerous geographies around the world and are required to comply with U.S. and non-U.S. import, export and sanctions laws (collectively “Trade Laws”). We have developed compliance programs and training to prevent violations of Trade Laws, and we regularly monitor and adjust our programs and training to reflect changes in Trade Laws or changes in our business. Geopolitical events may result in changes to Trade Laws that may impact our ability to transact business involving certain countries, certain items or certain counterparties, or may impose additional costs or complexity relating to tariffs, taxes, duties or adjustments to our compliance programs, training, or personnel requirements.

We are also required to comply with increasingly complex and changing laws and regulations enacted to protect business and personal data in the United States and other jurisdictions regarding privacy, data protection and data security, including those related to the collection, storage, use, transmission and protection of personal information and other consumer, customer, vendor or employee data. The risk of data privacy breaches cannot be entirely eliminated, creating risks of fines and penalties. Additionally, privacy and data protection laws and regulations, including with respect to the European Union’s General Data Protection Regulation ("GDPR"), and the California Consumer Privacy Act of 2018 ("CCPA"), and the interpretation and enforcement of these and similar laws and regulations, are continuously evolving and there is significant uncertainty with respect to how compliance with these laws and regulations may develop and the costs and complexity of future compliance.

We are also subject to federal, state, local and foreign environmental, safety and health laws and regulations concerning, among other things, emissions to the air, discharges to land and water and the generation, handling, treatment and disposal of hazardous waste and other materials. Under certain of these laws, we can be held strictly liable for hazardous substance contamination of any real property we have ever owned, operated or used as a disposal site or for natural resource damages associated with such contamination. We are also required to maintain various related permits and licenses, many of which require periodic modification and renewal. The operation of manufacturing plants unavoidably entails environmental, safety and health risks, and we could incur material unanticipated costs or liabilities in the future if any of these risks were realized in ways or to an extent that we did not anticipate.

We believe that we operate in compliance, in all material respects, with applicable environmental laws and regulations. Compliance with environmental laws and regulations requires continuing management effort and expenditures. We have incurred, and will continue to incur, costs and capital expenditures to comply with these laws and regulations and to obtain and maintain the necessary permits and licenses. We maintain insurance coverage that may cover certain costs or legal claims related to environmental regulations, and we accrue for estimated environmental liabilities with charges to expense and believe our environmental accrual is adequate to provide for our portion of the costs of all such known environmental liabilities. We believe that the cost of complying with environmental laws and regulations will not have a material effect on our earnings, liquidity or competitive position but cannot assure that material compliance-related costs and expenses may not arise in the future. For example, future adoption of new or amended environmental laws, regulations or requirements or newly discovered contamination or other circumstances could require us to incur costs and expenses that may have a material effect, but cannot be presently anticipated.

We believe that policies, practices and procedures have been properly designed to prevent unreasonable risk of material regulation or compliance obligations arising from our operations. Compliance with federal, state, local and foreign regulation and laws during 2024 had no material effect on our capital expenditures, earnings or competitive position. Based upon consideration of currently available information, we believe liabilities for any such matters will not have a material adverse effect on our financial position, operating results or liquidity, but we cannot guarantee that material liabilities may not arise from regulation and compliance obligations in the future.

Nordson Corporation 8

Human Capital Resources

Employee Profile

As of October 31, 2024, we had approximately 8,000 employees.

Total Rewards

As part of our compensation philosophy, we believe that we must offer and maintain market competitive total rewards programs for our employees in order to attract and retain superior talent. These programs not only include base wages and incentives in support of our pay for performance culture, but also health, welfare and retirement benefits. We focus many programs on employee wellness and have implemented solutions including mental health support access, telemedicine and healthy weight loss programs. We believe that these solutions have helped us successfully manage healthcare and prescription drug costs for our employee population.

In the U.S., we match contributions to a tax-qualified defined contribution retirement savings plan (the “Savings Plan”) for all eligible employees, in an amount equal to 50 cents for every dollar contributed by the employee until the employee contributions reach 6% of her or his base compensation. In addition, non-union new hires and re-hires as of July 1, 2021 are eligible for an additional enhanced 401(k) contribution of 3% eligible earnings. All contributions by employees into the Savings Plan are fully vested immediately. Company contributions, both the match and enhanced contribution, have a three-year graded vesting schedule and vest at 33 1/3% each year until fully vested after three years of employment. We also maintain a non-qualified, unfunded and unsecured deferred compensation plan for the benefit of eligible management. In addition, non-union employees hired prior to July 1, 2021 are eligible to participate in a Company-sponsored tax-qualified pension plan for U.S.-based employees (the “Salaried Pension Plan”). The Salaried Pension Plan is designed to work together with social security benefits to provide employees with up to 30 years of service retirement income replacement that is approximately 55% of eligible compensation, subject to the Internal Revenue Code maximum monthly benefit. Participants fully vest in the Salaried Pension Plan after five years of service. All eligible union employees hired prior to November 1, 2004 participate in a Company-sponsored tax-qualified pension plan for U.S.-based employees (the “Hourly Pension Plan”). The Hourly Pension Plan provides a multiplier for each year of service to supplement employees’ retirement income. We also maintain a supplemental retirement benefit restoration plan (“Excess Defined Benefit Pension Plan”), which is an unfunded, non-qualified plan that is designed to provide retirement benefits to U.S.-based eligible officers hired prior to July 1, 2021, as a replacement for retirement benefits limited by regulations under the Internal Revenue Code.

In 2022, we launched a global recognition program that allows managers and peers to recognize the special achievements of others through both written recognition shared on a company awards feed, as well as monetary recognition that allows a recipient to choose a physical gift, gift card or donate the value of their recognition to charity. We also continue our service award program, which demonstrates appreciation and thanks to longstanding employees with five or more years of service. Service milestones are recognized at each five-year increment by presentation of a digital and/or printed certificate with an invitation to select a recognition award via an online catalog.

Talent

Our key talent philosophy is to develop talent from within and supplement with external hires. This approach has yielded a deep understanding among our employee base of our business, products and customers, while adding new employees and ideas in support of our continuous improvement mindset. Attracting and retaining the best talent relies on our ability to provide a diverse and inclusive workplace, personal and professional growth opportunities, and a rewarding employee experience. We strive to uphold a culture of shared knowledge, appreciation and success. We believe that our average tenure across the globe reflects our positive workplace culture and the strong engagement of our employees. Our talent acquisition team uses internal and external resources to recruit highly skilled and talented workers, and we encourage employee referrals for open positions.

Talent development and succession planning for critical roles is a cornerstone of our talent program. Development plans are created and monitored to ensure progress is made along the established timelines. Development plans also intersect with our mission, particularly as we strive to be responsible to our communities.

One of our core values—Respect for People—reflects the behavior we strive to include in every aspect of the way we conduct business. Our approach encompasses inclusion awareness and skill-building, intentionality with respect to diversity in our hiring and selection process and performance management and succession planning that recognizes the importance of diversity. Nordson’s employee resource groups strengthen our commitment to fostering an inclusive, diverse workplace where everyone feels like they belong. Participation in these groups is open to all employees. We regularly reflect on our progress and explore opportunities to improve our inclusion and diversity programs, including at the executive leadership and Board levels.

Nordson Corporation 9

Available Information

Our annual report, quarterly reports and current reports (Form "8-K") and amendments to those reports filed or furnished with the Securities and Exchange Commission ("SEC") pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 are available free of charge at https://investors.nordson.com as soon as reasonably practical after such material is electronically filed with, or furnished to, the SEC. Copies of these reports may also be obtained free of charge by sending written requests to Corporate Communications, Nordson Corporation, 28601 Clemens Road, Westlake, Ohio 44145. The contents of our website are not incorporated by reference herein and are not deemed to be a part of this annual report.

In an enterprise as diverse as ours, a wide range of factors could affect future performance. We discuss in this section some of the risk factors that could materially and adversely affect our business, financial condition, value and results of operations. You should consider these risk factors in connection with evaluating the forward-looking statements contained in this annual report because these factors could cause our actual results and financial condition to differ materially from those projected in forward-looking statements. You should not interpret the disclosure of any risk factor to imply that the risk factor has not already materialized. Additional risks factors may exist that are not presently known by the Company or that are currently deemed immaterial may also be present.

Risks Related to Economic Conditions

Changes in United States or international economic conditions, including declines in the industries we serve, could adversely affect the revenue stream and profitability of any of our operations.

In 2024, approximately 33 percent of our revenue was generated in the United States, while approximately 67 percent was generated outside the United States. The COVID-19 pandemic and related preventative and mitigation measures implemented by governments around the world and the conflicts in Europe and the Middle East have negatively impacted the global economy and created significant volatility and disruption of financial markets, and may continue to do so in future periods.

A general sustained slowdown in the global economy or in a particular region or industry or an increase in trade tensions with U.S. trading partners could negatively impact our business, financial condition or liquidity. Our largest markets include consumer non-durable, industrial, medical, electronics, consumer durable and automotive. A slowdown in any of these specific end markets could directly affect our revenue stream and profitability.

A portion of our product sales is attributable to industries and markets, such as the electronics, polymer processing, agriculture, and metal finishing industries, which historically have been cyclical and sensitive to relative changes in supply and demand and general economic conditions. The demand for our products depends, in part, on the general economic conditions of the industries or national economies of our customers. Downward economic cycles in our customers’ industries or markets may reduce sales of some of our products. It is not possible to accurately predict the factors that will affect demand for our products in the future.

Any significant downturn in the health of the general economy, or any recession, depression or other sustained adverse market event or conditions, including inflationary pressures, could have an adverse effect on our revenues and financial performance, resulting in impairment of assets. We cannot predict the strength or duration of any economic slowdown and instability or the timing of any recovery.

Our financial results have been, and could continue to be, significantly impacted by uncertainty in U.S. trade policy, including uncertainty surrounding changes in tariffs, trade agreements or other trade restrictions imposed by the U.S. or other governments.

Our ability to conduct business can be significantly impacted by changes in tariffs, changes or repeals of trade agreements, including the impact of the “United States-Mexico-Canada Agreement” with Mexico and Canada, which replaced the North American Free Trade Agreement, or the imposition of other trade restrictions or retaliatory actions imposed by various governments. For example, the incoming U.S. presidential administration has proposed to significantly increase tariffs on foreign imports into the United States, particularly from Canada, China and Mexico. Other effects of these changes, including impacts on the price of raw materials, responsive actions from governments and the opportunity for competitors to establish a presence in markets where we participate, could also have significant impacts on our financial results. We cannot predict what further action may be taken with respect to tariffs or trade relations between the U.S. and other governments, and any further changes in U.S. or international trade policy could have an adverse impact on our business. Further, the conflicts in Europe and the Middle East may have significant adverse effects on international trade policy.

Nordson Corporation 10

Significant movements in foreign currency exchange rates or change in monetary policy may harm our financial results.

We are exposed to fluctuations in foreign currency exchange rates, particularly with respect to the euro, the yen, the pound sterling and the Chinese yuan. Any significant change in the value of the currencies of the countries in which we do business against the United States dollar could affect our ability to sell products competitively and control our cost structure, which could have a material adverse effect on our business, financial condition and results of operations. For additional detail related to this risk, see Part II, Item 7A, Quantitative and Qualitative Disclosure About Market Risk.

A significant portion of our consolidated revenues in 2024 were generated in currencies other than the United States dollar, which is our reporting currency. We recognize foreign currency transaction gains and losses arising from our operations in the period incurred. As a result, currency fluctuations between the United States dollar and the currencies in which we do business have caused and may continue to cause foreign currency transaction and translation movements, which historically have been material and could continue to be material. We cannot predict the effects of exchange rate fluctuations upon our future operating results because of the number of currencies involved, the variability of currency exposures and the potential volatility of currency exchange rates. We take actions to manage our foreign currency exposure, such as entering into hedging transactions, where applicable, but we cannot assure that our strategies will adequately protect our consolidated operating results from the effects of exchange rate fluctuations. For example, the impact of conflicts in Europe and the Middle East, changes in monetary policies and the effects of the departure of the United Kingdom from the European Union ("Brexit") have caused increased volatility in global currency exchange rates that have resulted in the strengthening of the United States dollar against the foreign currencies in which we conduct business. Future adverse consequences arising from the conflicts in Europe and the Middle East and Brexit may include continued volatility in exchange rates. Any significant fluctuation in exchange rates may be harmful to our financial condition and results of operations. We also face risks arising from the imposition of exchange controls and currency devaluations. Exchange controls may limit our ability to convert foreign currencies into United States dollars or to remit dividends and other payments by our foreign subsidiaries or customers located in or conducting business in a country imposing controls. Currency devaluations diminish the United States dollar value of the currency of the country instituting the devaluation and, if they occur or continue for significant periods, could adversely affect our earnings or cash flow.

Risks Related to Our Business and Operations

Political conditions in and between the United States and foreign countries in which we operate could adversely affect our business.

We conduct our manufacturing, sales and distribution operations on a worldwide basis and are subject to risks associated with doing business both within and outside the United States. We expect that international operations and United States export sales will continue to be important to our business for the foreseeable future. Both sales from international operations and export sales are subject to varying degrees of risks inherent in doing business outside the United States. Such risks include, but are not limited to, the following:

• risks of political or economic instability;

• unanticipated or unfavorable circumstances arising from host country laws or regulations;

• threats of war, terrorism or governmental instability, including the conflicts in Europe and the Middle East;

• changes in tax rates, adoption of new tax laws or other additional tax policies, and other proposals to reform United States and foreign tax laws that impact how United States multinational corporations are taxed on foreign earnings;

• restrictions on the transfer of funds into or out of a country;

• potential negative consequences from changes to taxation policies;

• the disruption of operations from labor and political disturbances;

• the imposition of tariffs, import or export licensing requirements and other potential changes in trade policies and relations arising from policy initiatives implemented by the U.S. presidential administration; and

• exchange controls or other trade restrictions including transfer pricing restrictions when products produced in one country are sold to an affiliated entity in another country.

Any of these events could reduce the demand for our products, limit the prices at which we can sell our products, interrupt our supply chain, or otherwise have an adverse effect on our operating performance.

Our international operations also depend upon favorable trade relations between the U.S. and those foreign countries in which our customers, subcontractors and materials suppliers have operations. A protectionist trade environment in either the U.S. or those foreign countries in which we do business, such as a change in the current tariff structures, export compliance or other

Nordson Corporation 11

trade policies, may materially and adversely affect our ability to sell our products in foreign markets. The incoming U.S. presidential administration has criticized existing trade agreements, and while it remains unclear what actions the current or future administration may take with respect to existing and proposed trade agreements, or restrictions on trade generally, more stringent export and import controls may be ultimately imposed in the future.

Failure to retain our existing senior management team or the inability to attract and retain qualified personnel could hurt our business and inhibit our ability to operate and grow successfully.

Our success will continue to depend to a significant extent on the continued service of our executive management team and the ability to recruit, hire and retain other key management personnel, including factory production workers and other staff, to support our growth and operational initiatives and replace those who retire or resign. Failure to retain our leadership team and workforce and to attract and retain other important management and technical personnel could place a constraint on our global growth and operational initiatives, possibly resulting in inefficient and ineffective management and operations, which would likely harm our revenues, operations and product development efforts and eventually result in a decrease in profitability.

The Company may be subject to risks relating to organizational changes.

We regularly execute organizational changes such as acquisitions, divestitures and realignments to support our growth and cost management strategies. We also engage in initiatives aimed to increase productivity, efficiencies and cash flow and to reduce costs. The Company commits significant resources to identify, develop and retain key employees to ensure uninterrupted leadership and direction. If we are unable to successfully manage these and other organizational changes, the ability to complete such activities and realize anticipated synergies or cost savings as well as our results of operations and financial condition could be materially adversely affected. We cannot offer assurances that any of these initiatives will be beneficial to the extent anticipated, or that the estimated efficiency improvements, incremental cost savings or cash flow improvements will be realized as anticipated or at all.

Increased information technology threats and cybersecurity incidents and threats could pose a risk to our systems, networks, products, solutions and services and those of our business partners.

We have experienced and expect to continue to experience cybersecurity threats and some cybersecurity incidents to our systems and networks. We do not believe that any risks from cybersecurity threats, including as a result of past cybersecurity incidents, have had, or are reasonably likely to have, a material adverse effect on the company, including our business, strategy, results of operations or financial condition. To conduct our business, we rely extensively on information technology systems, networks and services, some of which are managed, hosted and provided by third-party business partners. Increased global information technology security threats, computer crime and cyberterrorism pose a risk to the security of our systems and networks and those of our third-party service providers and the confidentiality, availability and integrity of our data. Cybersecurity incidents and similar attacks vary in their form and can include the deployment of harmful malware or ransomware, denial-of-services attacks, and other attacks, which may affect business continuity and threaten the availability, confidentiality and integrity of our systems and information. Cybersecurity incidents can also include employee or personnel failures, fraud, phishing or other social engineering attempts or other methods to cause confidential information, payments, account access or access credentials, or other data to be transmitted to an unintended recipient. Cybersecurity threat actors also may attempt to exploit vulnerabilities in software including software commonly used by companies in cloud-based services and bundled software. Depending on their nature and scope, such threats could potentially lead to the compromising of confidential information, including but not limited to confidential information relating to customer or employee data, improper use of our systems and networks, manipulation and destruction of data, defective products, production downtimes and operational disruptions, which in turn could adversely affect our reputation, competitiveness and results of operations. A cybersecurity incident or failure or disruption relating to our information or systems or that of our third-party business partners, or any failure by us or our third-party business partners to effectively address, enforce and maintain our information technology infrastructure and cybersecurity requirements may result in substantial harm to our business strategy, results of operations and financial condition, including major disruptions to business operations, loss of intellectual property, release of confidential information, alteration or corruption of data or systems, costs related to remediation or the payment of ransom, and litigation including individual claims or consumer class actions, commercial litigation, administrative, and civil or criminal investigations or actions, regulatory intervention and sanctions or fines, investigation and remediation costs and possible prolonged negative publicity.

We have taken steps and incurred costs to further strengthen the security of our computer systems and continue to assess, maintain and enhance the ongoing effectiveness of our information security systems. While we attempt to mitigate these risks by employing a number of measures, including employee training, comprehensive monitoring of our networks and systems, and maintenance of backup and protective systems, our systems, networks, products, solutions and services remain potentially vulnerable to advanced persistent threats. The techniques used by criminals to obtain unauthorized access to sensitive data change frequently and often are not recognizable until launched against a target. Accordingly, we may be unable to anticipate

Nordson Corporation 12

these techniques or implement adequate preventative measures. It is therefore possible that in the future we may suffer a criminal attack, unauthorized parties may gain access to personal information in our possession and we may not be able to identify any such incident in a timely manner.

The interpretation and application of data protection laws, including federal, state and international laws, relating to the collection, use, retention, disclosure, security and transfer of personally identifiable data in the U.S., Europe and elsewhere (including but not limited to the European Union’s GDPR and the CCPA), are uncertain and evolving. It is possible that these laws may be interpreted and applied in a manner that is inconsistent with our data practices. In addition, as a result of existing or new data protection requirements, we incur and expect to continue to incur significant ongoing operating costs as part of our significant efforts to protect and safeguard our sensitive data and personal information. These efforts also may divert management and employee attention from other business and growth initiatives. A breach in information privacy could result in legal or reputational risks and could have a negative impact on our revenues and results of operations.

We may face particular data protection and privacy risks in connection with the European Union's Global Data Protection Regulation, the California Consumer Privacy Act and other privacy laws and regulations.

The interpretation and application of data protection laws and other regulations, including federal, state and international laws, relating to the collection, use, retention, disclosure, security and transfer of personal information in the U.S., Europe and elsewhere (including but not limited to the European Union’s GDPR and the CCPA), are uncertain and evolving. These laws and regulations may grant, among other things, individual rights to access and delete personal information, and the right to opt out of the sale of personal information. These laws and regulations can also impose significant forfeitures and penalties for noncompliance and afford private rights of action to individuals under certain circumstances. It is possible that these laws may be interpreted and applied in a manner that is inconsistent with our data practices. In addition, as a result of existing or new data protection laws and regulations, we incur and expect to continue to incur significant ongoing operating costs as part of our significant efforts to protect and safeguard our confidential or sensitive data and personal information. These efforts also may divert management and employee attention from other business and growth initiatives. A breach in information privacy could result in legal or reputational risks and could have a negative impact on our revenues and results of operations. Any failure to manage data privacy in compliance with applicable laws and regulations could result in significant regulatory investigations, fines, and sanctions, consumer and class action litigation, commercial litigation, prolonged negative publicity, data breaches, declining customer confidence, loss of key customers, employee liability and other unfavorable consequences.

A disruption in, shortage of, or price increases for, supply of our components and raw materials may adversely impact our business, financial condition, results of operations and cash flows.

While we manufacture certain parts and components used in our products, we require substantial amounts of raw materials and purchase some parts and components from suppliers. The availability and prices for raw materials, parts and components may be subject to curtailment or change due to, among other things, suppliers' allocation to other purchasers, interruptions in production by suppliers and changes in exchange rates and prevailing price levels, including as a result of inflation or the imposition of tariffs, import or export licensing requirements and other potential changes in trade policies. The conflicts in Europe and the Middle East have negatively impacted, and may continue to negatively impact, the availability and prices for raw materials, parts and components. While we generally attempt to pass along higher raw material, part and component costs to our customers in the form of price increases, there historically has been a delay between an increase in our raw material costs and our ability to increase the prices of our products. Additionally, we may not be able to increase the prices of our products due to competitive pricing pressure and other factors. Shortages in raw materials or our inability to pass along price increases could affect the prices we charge, our operating costs and our competitive position, which could adversely affect our business, financial condition, results of operations and cash flows.

In addition, our facilities, supply chains, distribution systems and products may be impacted by natural or man-made disruptions, including armed conflict, demand surges, damaging weather or other acts of nature (including weather or other acts of nature caused by climate change), pandemics or other public health crises. A shutdown of, or inability to utilize, one or more of our facilities, our supply chain, or our distribution system could significantly disrupt our operations, delay production and shipments, impact our relationships and reputation with customers, suppliers, employees and others, result in lost or decreased sales, or result in legal exposure and large remediation or other expenses, which could adversely affect our business, financial condition, results of operations and cash flows.

If our intellectual property protection is inadequate, others may be able to use our technologies and tradenames and thereby reduce our ability to compete, which could have a material adverse effect on our business, financial condition and results of operations.

We regard much of the technology underlying our products and the trademarks under which we market our products as proprietary. The steps we take to protect our proprietary technology may be inadequate to prevent misappropriation of our technology, or third parties may independently develop similar technology. We rely on a combination of patents, trademark,

Nordson Corporation 13

copyright and trade secret laws, employee and third-party non-disclosure agreements and other contracts to establish and protect our technology and other intellectual property rights. The agreements may be breached or terminated, and we may not have adequate remedies for any breach, and existing trade secrets, patent and copyright law afford us limited protection. Policing unauthorized use of our intellectual property is difficult. A third party could copy or otherwise obtain and use our products or technology without authorization. Litigation may be necessary for us to defend against claims of infringement or to protect our intellectual property rights and could result in substantial cost to us and diversion of our efforts. Further, we might not prevail in such litigation, which could harm our business.

Our products could infringe on the intellectual property of others, which may cause us to engage in costly litigation and, if we are not successful, could cause us to pay substantial damages and prohibit us from selling our products.

Third parties may assert infringement or other intellectual property claims against us based on their patents or other intellectual property claims, and we may have to pay substantial damages, possibly including treble damages, if it is ultimately determined our products infringe. We may have to obtain a license to sell our products if it is determined that our products infringe upon another party’s intellectual property. We might be prohibited from selling our products before we obtain a license, which, if available at all, may require us to pay substantial royalties. Even if infringement claims against us are without merit, defending these types of lawsuits takes significant time, may be expensive and may divert management attention from other business concerns.

Risks Related to the Execution of Our Strategy

We continually assess the strategic fit of our existing businesses and may divest or otherwise dispose of businesses that are deemed not to fit with our strategic plan or are not achieving the desired return on investment, and we cannot be certain that our business, operating results and financial condition will not be materially and adversely affected.

A successful divestiture depends on various factors, including reaching an agreement with potential buyers on terms we deem attractive, as well as our ability to effectively transfer liabilities, contracts, facilities, and employees to any purchaser, identify and separate the intellectual property to be divested from the intellectual property that we wish to retain, reduce fixed costs previously associated with the divested assets or business, and collect the proceeds from any divestitures. These efforts require varying levels of management resources, which may divert our attention from other business operations. If we do not realize the expected benefits of any divestiture transaction, our consolidated financial position, results of operations and cash flows could be negatively impacted. In addition, divestitures of businesses involve a number of risks, including significant costs and expenses, the loss of customer relationships and a decrease in revenues and earnings associated with the divested business. Furthermore, divestitures potentially involve significant post-closing separation activities, which could involve the expenditure of material financial resources and significant employee resources. Any divestiture may result in a dilutive impact to our future earnings if we are unable to offset the dilutive impact from the loss of revenue associated with the divestiture, as well as significant write-offs, including those related to goodwill and other intangible assets, which could have a material adverse effect on our results of operations and financial condition.

If we fail to develop new products or enhance existing products, or our customers do not accept the new or enhanced products we develop, our financial condition, results of operations, cash flows and liquidity could be adversely affected.

Innovation is critical to our success. We believe that we must continue to enhance our existing products and to develop and manufacture new products with improved capabilities in order to continue to be a leading provider of precision technology solutions. We also believe that we must continue to make improvements in our productivity in order to maintain our competitive position. Difficulties or delays in research, development or production of new or enhanced products or failure to gain market acceptance of new or enhanced products and technologies may reduce future sales and adversely affect our competitive position. We continue to invest in the development and marketing of new or enhanced products. There can be no assurance that we will have sufficient resources to make such investments, that we will be able to make the technological advances necessary to maintain competitive advantages or that we can recover major research and development expenses. If we fail to make innovations, launch products with quality problems or the market does not accept our new products, our financial condition, results of operations, cash flows and liquidity could be adversely affected. In addition, as new or enhanced products are introduced, we must successfully manage the transition from older products to minimize disruption in customers’ ordering patterns, avoid excessive levels of older product inventories and ensure that we can deliver sufficient supplies of new products to meet customers’ demands.

Our growth strategy includes acquisitions, and we may not be able to execute on our acquisition strategy or integrate acquisitions successfully.

Our recent historical growth has depended, and our future growth is likely to continue to depend, in part on our acquisition strategy and the successful integration of acquired businesses into our existing operations. For example, in August 2024, we completed our acquisition of Atrion. We intend to continue to seek additional acquisition opportunities both to expand into new

Nordson Corporation 14

markets and to enhance our position in existing markets throughout the world. We cannot assure we will be able to successfully identify suitable acquisition opportunities, prevail against competing potential acquirers, negotiate appropriate acquisition terms, obtain financing that may be needed to consummate such acquisitions, complete proposed acquisitions, successfully integrate acquired businesses into our existing operations or expand into new markets. In addition, we cannot assure that any acquisition, including the recent acquisitions of Atrion, the ARAG Group ("ARAG") and CyberOptics Corporation ("CyberOptics"), once successfully integrated, will perform as planned, be accretive to earnings, or prove to be beneficial to our operations and cash flow.

The success of our acquisition strategy is subject to other risks and uncertainties, including:

• our ability to realize operating efficiencies, synergies or other benefits expected from an acquisition and possible delays in realizing the benefits of the acquired company or products;

• diversion of management’s time and attention from other business concerns;

• difficulties in retaining key employees, customers or suppliers of the acquired business;

• difficulties in maintaining uniform standards, controls, procedures and policies throughout acquired companies;

• adverse effects on existing business relationships with suppliers or customers;

• the risks associated with the assumption of product liabilities or contingent or undisclosed liabilities of acquisition targets; and

• the ability to generate future cash flows or the availability of financing.

In addition, an acquisition could adversely impact our operating performance as a result of incurring acquisition-related debt, pre-acquisition potential tax or other liabilities, acquisition expenses, the amortization of acquisition-acquired assets or possible future impairments of goodwill or intangible assets associated with the acquisition.

We may also face liability with respect to acquired businesses for violations of environmental laws occurring prior to the date of our acquisition, and some or all of these liabilities may not be covered by environmental insurance secured to mitigate the risk or by indemnification from the sellers from which we acquired these businesses. We could also incur significant costs, including, but not limited to, remediation costs, natural resources damages, civil or criminal fines and sanctions and third-party claims, as a result of past or future violations of, or liabilities, associated with environmental laws.

Any impairment in the value of our intangible assets, including goodwill, would negatively affect our operating results and total capitalization.

Our total assets reflect substantial intangible assets, primarily goodwill. The goodwill results from our acquisitions and represents the excess of cost over the fair value of the identifiable net assets we acquired. We assess at least annually whether there has been any impairment in the value of our intangible assets. If future operating performance at one or more of our business units were to fall significantly below current levels, if competing or alternative technologies emerge, if market conditions for acquired businesses decline, if significant and prolonged negative industry or economic trends exist, if our stock price and market capitalization declines, or if future cash flow estimates decline, we could incur, under current applicable accounting rules, a non-cash charge to operating earnings for goodwill impairment. In addition, any determination requiring the write-off of a significant portion of unamortized intangible assets would negatively affect our results of operations and equity book value, the effect of which could be material.

Risks Related to Legal, Compliance and Regulatory Matters

Changes in United States and international tax laws may have a material adverse effect on our business, financial condition and results of operations.

We are subject to income taxes in the United States and various foreign jurisdictions. Changes in applicable domestic or foreign tax laws and regulations, or their interpretation and application, including the possibility of retroactive effect, could affect our business, financial condition and profitability by increasing our tax liabilities. Our future results of operations could be adversely affected by changes in our effective tax rate as a result of a change in the mix of earnings in jurisdictions with differing statutory tax rates, changes in our overall profitability, changes in tax legislation and rates, changes in generally accepted accounting principles and changes in the valuation of deferred tax assets and liabilities. The U.S. federal government may adopt changes to international trade agreements, tariffs, taxes and other government rules and regulations. While we cannot predict what changes will actually occur with respect to any of these items, such changes could affect our business and results of operations.

Nordson Corporation 15

We may be exposed to liabilities under the Foreign Corrupt Practices Act ("FCPA"), which could have a material adverse effect on our business, reputation, financial condition or results of operations.

We are subject to compliance with various laws and regulations, including the FCPA, UK Bribery Act and similar worldwide anti-bribery and anti-corruption laws, which generally prohibit companies and their intermediaries from engaging in bribery or making other improper payments to private or public parties for the purpose of obtaining or retaining business or gaining an unfair business advantage. The FCPA also requires proper record keeping and characterization of such payments in our reports filed with the SEC. Our employees are trained and required to comply with these laws, and we are committed to legal compliance and corporate ethics. Violations of these laws could result in severe criminal or civil sanctions and financial penalties and other consequences that may have a material adverse effect on our business, reputation, financial condition or results of operations.

The level of returns on pension plan assets, changes in the actuarial assumptions used and management of pension liabilities could adversely affect us.

Our operating results may be positively or negatively impacted by the amount of expense we record for our defined benefit pension plans. U.S. GAAP requires that we calculate pension expense using actuarial valuations, which are dependent upon our various assumptions, including estimates of expected long-term rate of return on plan assets, discount rates for future payment obligations, and the expected rate of increase in future compensation levels. Our pension expense and funding requirements may also be affected by our actual return on plan assets and by legislation and other government regulatory actions. Changes in assumptions, laws or regulations and how the Company manages pension liabilities could lead to variability in financial results and could have a material adverse impact on liquidity.

Our global operations are subject to increasingly complex environmental regulatory requirements, and compliance with evolving environmental regulatory requirements could negatively impact our business, capital expenditures, results of operations, financial condition and competitive position.

We are subject to increasingly complex environmental regulations affecting international manufacturers, including those related to air and water emissions, waste management and climate change. Some environmental laws impose strict, retroactive and joint and several liability for the remediation of the release of hazardous substances, even for conduct that was lawful at the time it occurred, or for the conduct of or conditions caused by prior operators, predecessors or third parties. Failure to comply with environmental laws could expose us to penalties or clean-up costs, civil or criminal liability and sanctions on certain of our activities, as well as damage to property or natural resources. These liabilities, sanctions, damages and remediation efforts related to any non-compliance with such laws and regulations could negatively impact our ability to conduct our operations and our financial condition and results of operations. In addition, there can be no assurances that we will not be adversely affected by costs, liabilities or claims with respect to existing or subsequently acquired operations or under present laws and regulations or those that may be adopted or imposed in the future.

Changes in environmental laws or regulations could result in higher expenses and payments, and uncertainty relating to environmental laws or regulations may also affect how we conduct our operations and structure our investments and could limit our ability to enforce our rights. Changes in environmental and climate change laws or regulations, including laws relating to greenhouse gas emissions, could subject us to additional costs and restrictions, including increased energy and raw material costs. If environmental laws or regulations are either changed or adopted and impose significant operational restrictions and compliance requirements upon us or our products, they could negatively impact our business, capital expenditures, results of operations, financial condition and competitive position.

It is our policy to apply strict standards for environmental protection to all of our operations within and outside of the United States, even when we are not subject to local government regulations. We may incur substantial costs, including cleanup costs, fines and civil or criminal sanctions, liabilities resulting from third-party property damage or personal injury claims, or our products could be prohibited from entering certain jurisdictions, if we were to violate or become liable under environmental laws, if our products become non-compliant with environmental laws or if we were to undertake environmental protection actions voluntarily.

Expectations relating to environmental, social and governance ("ESG") considerations expose us to potential liabilities, increased costs, reputational harm and other adverse effects on our business.

Many governments, regulators, investors, employees, customers and other stakeholders are increasingly focused on ESG considerations relating to businesses, including climate change and greenhouse gas emissions, human capital and diversity, equity and inclusion. We make statements about our ESG goals and initiatives through information provided on our website, press statements and other communications, including through our ESG Report. Responding to these ESG considerations and implementation of these goals and initiatives involves risks and uncertainties, requires investments and are impacted by factors that may be outside our control. In addition, some stakeholders may disagree with our goals and initiatives and the focus of

Nordson Corporation 16

stakeholders may change and evolve over time. Stakeholders also may have very different views on where ESG focus should be placed, including differing views of regulators in various jurisdictions in which we operate. Any failure, or perceived failure, by us to achieve our goals, further our initiatives, adhere to our public statements, comply with federal, state or international ESG laws and regulations, or meet evolving and varied stakeholder expectations and standards could result in legal and regulatory proceedings against us and materially adversely affect our business, reputation, results of operations, financial condition and stock price.

Risks Related to Our Capital Structure

Our inability to comply with the restrictive covenants included in the agreements governing our debt or to access additional sources of capital could impede our growth or the repayment or refinancing of existing debt.

The limits imposed on us by the restrictive covenants contained in the agreement governing our debt could prevent us from making acquisitions or cause us to lose access to these facilities.

The agreements governing our existing debt contain restrictive covenants that limit our ability to, among other things:

• borrow money or guarantee the debts of others;

• use assets as security in other transactions;

• make restricted payments or distributions; and

• sell or acquire assets or merge with or into other companies.

In addition, our credit facilities require us to meet certain financial ratios, including a “Leverage Ratio” and an “Interest Coverage Ratio,” both as defined in the credit facilities.

These restrictions could limit our ability to plan for or react to market conditions or meet extraordinary capital needs and could otherwise restrict our financing activities.

Our ability to comply with the covenants and other terms of the agreements governing our debt will depend on our future operating performance. If we fail to comply with such covenants and terms, we may be in default and the maturity of the related debt could be accelerated and become immediately due and payable. We may be required to obtain waivers from our lenders in order to maintain compliance under our credit facilities, including waivers with respect to our compliance with certain financial covenants. If we are unable to obtain necessary waivers and the debt under our credit facilities is accelerated, we would be required to obtain replacement financing at prevailing market rates.

We may need to obtain new or additional financing in the future to expand our business or refinance existing debt. If we are unable to access capital on satisfactory terms and conditions, we may not be able to expand our business or meet our payment requirements under our existing debt. Our ability to obtain new or additional financing will depend on a variety of factors, many of which are beyond our control. We may not be able to obtain new or additional financing because we have substantial debt or because we may not have sufficient cash flow to service or repay our existing or future debt. In addition, depending on market conditions and our financial performance, neither debt nor equity financing may be available on satisfactory terms or at all. Finally, if financial market conditions worsen, our credit facility providers may not provide the agreed credit if they become undercapitalized.

Changes in interest rates could adversely affect us.

Any period of interest rate increases may adversely affect our profitability. As of October 31, 2024, we had $2,223,928 of total debt outstanding, of which $538,286 was priced at interest rates that float with the market. As of October 31, 2024, a one percentage point increase in the interest rate on the floating rate debt would result in approximately $5,383 of additional annual interest expense. A higher level of floating rate debt would increase the exposure to changes in interest rates. For additional detail related to this risk, see Part II, Item 7A, Quantitative and Qualitative Disclosures About Market Risk.

General Risk Factors

The insurance that we maintain may not fully cover all potential exposures.

We maintain property, business interruption and casualty insurance but such insurance may not cover all risks associated with the hazards of our business and is subject to limitations, including deductibles and maximum liabilities covered. We are potentially at risk if one or more of our insurance carriers fail or deny our claims. Additionally, severe disruptions in the domestic and global financial markets could adversely impact the ratings and survival of some insurers. In the future, we may not be able to obtain coverage at current levels, and our premiums may increase significantly on coverage that we maintain.

Nordson Corporation 17

Our business, financial condition and results of operations may be adversely affected by natural disasters or other catastrophic events beyond our control.

While we have taken precautions to prevent production and service interruptions at our global facilities, severe weather conditions, including any that may be caused by global climate change, such as hurricanes or tornadoes, as well as major earthquakes, wildfires and other natural disasters in areas in which we have manufacturing facilities or from which we obtain products may cause physical damage to our properties, closure of one or more of our manufacturing or distribution facilities, lack of an adequate work force in a market, temporary disruption in the supply of inventory, disruption in the transport of products and utilities, and delays in the delivery of products to our customers. Any of these factors may disrupt our operations and adversely affect our business, financial condition and results of operations.

None.

Cybersecurity Risk Management and Strategy

Nordson Corporation manages cybersecurity risks by implementing processes for assessment, identification, and mitigation of cybersecurity threats. Nordson's cybersecurity program is designed to align with the National Institute of Standards and Technology ("NIST") Cybersecurity Framework, enabling us to develop policies regarding information access, asset protection and personal data security. However, this does not mean that we meet any particular technical standards, specifications or requirements, but rather that we use the NIST Cybersecurity Framework as a guide to help us identify, assess and manage cybersecurity risks and threats relevant to our business. We strive to protect our information assets through key cybersecurity measures, such as the implementation of multifactor authentication and advanced malware defenses, and we collaborate with internal stakeholders to establish layered cybersecurity defenses and restricted access based on business needs. We conduct regular continuous education sessions for our employees on cybersecurity awareness, including confidential information protection and simulated phishing attacks.

We engage with experts to assist with regular third-party penetration testing to evaluate our program against industry standards. We also have standing engagements with incident response experts and external counsel to enhance our cybersecurity resilience. We frequently collaborate with cybersecurity experts to share insights on threats, best practices and emerging trends.

Our cybersecurity risk management is a critical component of our comprehensive business continuity and enterprise risk management programs. Our information security team regularly collaborates with cross-functional subject matter experts and leaders to assess and enhance our cybersecurity risk posture and preparedness. Management employs the following defense mechanisms throughout the enterprise: employee training program to increase cybersecurity awareness, vulnerability management to identify and address potential weaknesses, multifactor authentication for secure access, tabletop exercises to simulate and prepare for potential incidents, and evaluation of third-party service providers, business partners and cloud suppliers, including through assessments of their cybersecurity practices prior to service utilization.

To date, management has not identified any risks from cybersecurity threats, including as a result of previous cybersecurity incidents, that have materially affected or are reasonably likely to materially affect Nordson Corporation, including its business strategy, results of operations or financial condition. See "Item 1A. Risk Factors, Increased information technology threats and cybersecurity incidents and threats could pose a risk to our systems, networks, products, solutions and services and those of our business partners." above for more information. While we are committed to safeguarding our information and the proprietary and confidential information they contain, we note that no security measures can guarantee complete protection against cybersecurity incidents.

Governance

The Board of Directors, as a whole, has overarching responsibility for overseeing our strategic and operational risks. The Audit Committee specifically monitors risk management, including cybersecurity threats. Management, led by the Vice President, Information Systems and Technology, regularly reports to the Board of Directors, primarily through the Audit Committee, providing an annual report on specific risks, mitigation efforts, and a review of Nordson's cybersecurity maturity.

Management is responsible for day-to-day assessment and management of cybersecurity threats and risks. Nordson's Senior Director of Security and Compliance, primarily leads these efforts. The Vice President, Information Systems and Technology is responsible for oversight of Nordson's entire global IT operations, including the cybersecurity program and brings more than 25 years of experience and leadership across various information technology engineering, business and management roles, including direct oversight of strategic direction, program execution and operational excellence of technology initiatives.

Nordson Corporation 18

The Senior Director of Security and Compliance assesses cybersecurity readiness using a variety of tools, including internal assessment tools as well as third-party control tests, vulnerability assessments, audits and evaluation against industry standards. Our security and compliance organization elevates issues relating to cybersecurity to our Chief Executive Officer and Board of Directors, such as potential threats or vulnerabilities. We also seek to prevent, detect, mitigate and remediate cybersecurity incidents by employing various defensive and continuous monitoring techniques using recognized industry frameworks and cybersecurity standards.

Our Vice President, Information Systems and Technology meets regularly with the Audit Committee to review our information technology systems and discuss key cybersecurity risks. Additionally, the Director, Internal Audit and Chief Financial Officer presents an overview of our global enterprise risk management program, including cybersecurity risks, to the Audit Committee, which is subsequently reported to the Board of Directors.

Our principal owned and leased properties (defined as greater than 20,000 square feet or related to a principal operation) as of October 31, 2024 were as follows:

Nordson Corporation 19

Nordson Corporation 20

Business Segment - Property Identification Legend

1 - Industrial Precision Solutions

2 - Medical and Fluid Solutions

3 - Advanced Technology Solutions

The facilities listed have adequate, suitable and sufficient capacity (production and non-production) to meet present and foreseeable demand for our products.

Other properties at international subsidiary locations and at branch locations within the United States are leased. Lease terms do not exceed 25 years and generally contain a provision for cancellation with some penalty at an earlier date. Information about leases is reported in Note 9 of Notes to Consolidated Financial Statements that can be found in Part II, Item 8 of this document.

None.

Not applicable.

Nordson Corporation 21

Information About Our Executive Officers

Our executive officers as of October 31, 2024, were as follows:

Effective August 1, 2019, Sundaram Nagarajan was appointed President and Chief Executive Officer and as a member of the Board of Directors of the Company. Prior to becoming our President and Chief Executive Officer, Mr. Nagarajan served as Executive Vice President, Automotive OEM Segment, with Illinois Tool Works Inc. (NYSE: ITW), a global manufacturer of a diversified range of industrial products and equipment, since 2015. Prior to that, Mr. Nagarajan served as Executive Vice President, Welding Segment, with Illinois Tool Works Inc. from 2010 to 2015. Mr. Nagarajan joined the Board of Directors of Wesco International, Inc. (NYSE: WCC) in 2022. He previously served as a member of the Board of Directors of Sonoco Products Company (NYSE: SON) from 2015 to 2022.

Effective May 20, 2024, Daniel R. Hopgood was appointed as Executive Vice President and Chief Financial Officer. Prior to joining Nordson, Mr. Hopgood was Controller and Chief Accounting Officer from April 2021 to May 2024 and Senior Vice President, Global Financial Services and Systems from September 2017 to March 2021 of Eaton Corporation (NYSE: ETN), a multinational power management company. Prior to joining Eaton Corporation, Mr. Hopgood served in various roles of increasing responsibility such as Vice President, Aftermarket Americas for Meritor, Inc. (NYSE: MTOR), a Fortune 500 manufacturer of commercial vehicle components and systems, and Manager of Corporate Finance and Reporting for MSX International, Inc., a management consulting company for leading automotive brands.

Effective November 1, 2023, Joseph P. Kelley was appointed as Executive Vice President - Industrial Precision Solutions. Previously, Mr. Kelley served as Executive Vice President and Chief Financial Officer of the Company since July 2020. Prior to joining the Company, Mr. Kelley had previously served as Chief Financial Officer of Materion Corporation, (NYSE: MTRN), an advanced materials company, since 2015. Throughout his career, he served in roles of increasing financial responsibility at Materion, Avient Corporation (formerly known as PolyOne Corporation) (NYSE: AVNT), a specialty chemicals company, and Lincoln Electric Holdings, Inc. (Nasdaq: LECO), a global manufacturer.

Effective August 1, 2022, Stephen P. Lovass was named Executive Vice President - Medical and Fluid Solutions. Previously, Mr. Lovass served as Corporate Vice President since November 2016. Prior to joining the Company, Mr. Lovass served as President for one of the global sensors and controls businesses for Danaher Corporation (NYSE: DHR), an international Fortune 200, diversified science and technology company, from 2012 to 2016. Prior to joining Danaher Corporation, Mr. Lovass served as a Senior Vice President and Corporate Officer for Gerber Scientific, Inc., an automated systems manufacturer for sign-making, specialty graphics and packaging.

Effective November 1, 2021, Jennifer L. McDonough was named Executive Vice President, General Counsel and Secretary and leads the Company’s global legal function in ethics and compliance, intellectual property and other general corporate legal matters. Ms. McDonough brings over 20 years of experience advising companies on wide-ranging, critical corporate initiatives and previously served as Vice President, Deputy General Counsel and Assistant Secretary at PPL Corporation (NYSE: PPL), a Fortune 500 utility company, where she was responsible to deliver extensive legal counsel and services, including in the areas of general corporate law, mergers and acquisitions, corporate venture capital and investment transactions, securities and finance. Prior to joining PPL in 2017, Ms. McDonough served as Senior Vice President, General Counsel and Secretary at REX Energy Corporation, an independent condensate and natural gas company, having joined REX Energy ("REX") in April 2011, and before that as Assistant General Counsel and Assistant Secretary at Kennametal Inc. (NYSE: KMT), a global manufacturer and provider of engineered products and solutions, which she joined in May 2005. She began her career as a business and finance attorney with the international law firm Morgan, Lewis and Bockius LLP.

Nordson Corporation 22

Effective February 20, 2023, Sarah Siddiqui was named Executive Vice President - Chief Human Resources Officer. Prior to joining the Company, Ms. Siddiqui served as Vice President of HR, Operations Engineering, Digital and Corporate Functions from August 2020 to February 2023 and Executive Director of HR, Operations, UTC Aerospace Systems from February 2018 to July 2020 of Collins Aerospace at Raytheon Technologies (NYSE: RTX), an aerospace and defense company. Before joining Collins Aerospace, she had various roles of increasing responsibilities within the HR function at United Technologies and Citigroup.

Effective August 1, 2022, Srinivas Subramanian was named Executive Vice President - Advanced Technology Solutions. Previously, Mr. Subramanian served as Vice President of the Electronics Processing Solutions business, having served in various roles of increasing responsibility since joining the Company in 2006.

Nordson Corporation 23

PART II

Market Information and Dividends

Our common shares are listed on the Nasdaq Global Select Market under the symbol NDSN. As of November 30, 2024, there were 1,088 record shareholders.

While we have historically paid dividends to holders of our common shares on a quarterly basis, the declaration and payment of future dividends will depend on many factors, including but not limited to, our earnings, financial condition, business development needs and regulatory considerations, and are at the discretion of our board of directors.

Performance Graph

The following graph compares the 10-year cumulative return, calculated on a dividend-reinvested basis, from investing $100 on November 1, 2014 in Nordson common shares, the S&P 500 Index, the S&P MidCap 400 Index, the S&P 500 Industrial Machinery Index, the S&P MidCap 400 Industrial Machinery Index and our New Peer Group, which includes: AME, B, DCI, ENTG, GGG, GTLS, ICUI, IEX, ITT, KEYS, LECO, MKSI, NATI, TER, TFX, TRMB, VNT, WTS and WWD.

Source: Zack’s Investment Research

Nordson Corporation 24

Common Share Repurchases

(1) Includes shares tendered for taxes related to stock option exercises and vesting of restricted stock.

(2) In December 2014, the board of directors authorized a $300,000 common share repurchase program. In August 2015, the board of directors authorized the repurchase of up to an additional $200,000 of the Company’s common shares. In August 2018, the board of directors authorized the repurchase of an additional $500,000 of the Company’s common shares. In September 2022, the board of directors authorized the repurchase of up to an additional $500,000 of the Company's common shares. Approximately $523,798 of the total $1,500,000 authorized remained available for share repurchases at October 31, 2024. Uses for repurchased shares include the funding of benefit programs including stock options and restricted stock. Shares purchased are treated as treasury shares until used for such purposes. The repurchase program will be funded using cash from operations and proceeds from borrowings under our credit facilities. The repurchase program does not have an expiration date.

Nordson Corporation 25

NOTE REGARDING AMOUNTS AND FISCAL YEAR REFERENCES

In this annual report, all amounts related to United States dollars and foreign currency and to the number of Nordson Corporation’s common shares, except for per share earnings and dividend amounts, are expressed in thousands. Unless the context otherwise indicates, all references to “we,” “us,” “our,” or the “Company” mean Nordson Corporation.

Unless otherwise noted, all references to years relate to our fiscal year ending October 31.

Critical Accounting Policies and Estimates

Our Consolidated Financial Statements and accompanying notes have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires management to make estimates, judgments and assumptions that affect reported amounts of assets, liabilities, revenues and expenses. On an ongoing basis, we evaluate the accounting policies and estimates that are used to prepare financial statements. We base our estimates on historical experience and assumptions believed to be reasonable under current facts and circumstances. Actual amounts and results could differ from these estimates used by management.

Certain accounting policies that require significant management estimates and are deemed critical to our results of operations or financial position are discussed below. On a regular basis, critical accounting policies are reviewed with the Audit Committee of the board of directors.

Revenue recognition - A contract exists when it has approval and commitment from both parties, the rights of the parties are identified, payment terms are identified, the contract has commercial substance and collectability of the consideration is probable. Revenue is recognized when performance obligations under the terms of the contract with a customer are satisfied. Generally, our revenue results from short-term, fixed-price contracts and is recognized as of a point in time when the product is shipped or at a later point when the control of the product transfers to the customer. Refer to Note 1 to the Consolidated Financial Statements for further discussion regarding the Company's revenue recognition policy.

Business combinations - The acquisitions of our businesses are accounted for under the acquisition method of accounting. The amounts assigned to the identifiable assets acquired and liabilities assumed in connection with acquisitions are based on estimated fair values as of the date of the acquisition, with the remainder, if any, recorded as goodwill. The fair values are determined by management, taking into consideration information supplied by the management of the acquired entities, and other relevant information. Such information typically includes valuations obtained from independent appraisal experts, which management reviews and considers in its estimates of fair values. The valuations are generally based upon future cash flow projections for the acquired assets, discounted to present value. Determining the fair value of assets acquired and liabilities assumed requires management’s judgment and often involves the use of significant estimates and assumptions, including assumptions with respect to future revenue growth rates and EBITDA margins, discount rates, customer attrition rates, and asset lives, among other items. This judgment could result in either a higher or lower value assigned to amortizable or depreciable assets. The impact could result in either higher or lower amortization and/or depreciation expense.

Goodwill - Goodwill is the excess of purchase price over the fair value of tangible and identifiable intangible net assets acquired in various business combinations. Goodwill is not amortized but is tested for impairment annually at the reporting unit level, or more often if indications of impairment exist.

We test goodwill in accordance with Accounting Standards Codification ("ASC") 350. We did not record any goodwill impairment charges in 2024. We use an independent valuation specialist to assist with refining our assumptions and methods used to determine fair values. To test for goodwill impairment, we estimate the fair value of each of our reporting units using a combination of the discounted cash flow method ("Income Approach") and the Market Approach.

The Income Approach uses assumptions for revenue growth, operating margin and working capital turnover that are based on management’s strategic plans tempered by performance trends and reasonable expectations about those trends. Terminal value calculations employ a published formula known as the Gordon Growth Model Method that essentially captures the present value of perpetual cash flows beyond the last projected period assuming a constant Weighted Average Cost of Capital ("WACC") methodology and growth rate. For each reporting unit, a sensitivity analysis is performed to vary the discount and terminal growth rates in order to provide a range of reasonableness for detecting impairment. Discount rates are developed using a WACC methodology.

The WACC represents the blended average required rate of return for equity and debt capital based on observed market return data and company specific risk factors. For 2024, the WACC rates used ranged from 8.0 percent to 9.0 percent depending upon the reporting unit's size, end market volatility and projection risk. See Note 5 to the Consolidated Financial Statements for further details regarding the valuation methodologies used.

Nordson Corporation 26

In 2024, 2023 and 2022, the results of our annual impairment tests indicated no impairment.

The fair value ("FV") was compared to the carrying value ("CV") for each reporting unit. Based on the results shown in the table below and based on our measurement date of August 1, 2024, our conclusion is that no goodwill was impaired in 2024. Potential events or circumstances, such as a sustained downturn in global economies, could have a negative effect on estimated fair values.

Pension plan in the United States - The measurement of the liabilities related to our domestic pension plan is based on management’s assumptions related to future factors, including interest rates, return on pension plan assets, compensation increases, mortality and turnover assumptions and health care cost trend rates. The liabilities associated with the Company's international pension plans and OPEB are not as materially sensitive to changes in assumptions as the pension plan in the United States.

The weighted-average discount rate used to determine the present value of our domestic pension plan obligations was 5.27 percent at October 31, 2024 and 6.08 percent at October 31, 2023. The discount rate used was determined by using quality fixed income investments with a duration period approximately equal to the period over which pension obligations are expected to be settled.

In determining the expected return on plan assets, we consider both historical performance and an estimate of future long-term rates of return on assets similar to those in our plans. We consult with and consider the opinions of financial and actuarial experts in developing appropriate return assumptions. The expected rate of return (long-term investment rate) on domestic pension assets used to determine net benefit costs was 6.50 percent and 6.40 percent in 2024 and 2023, respectively.

The assumed rate of compensation increases used to determine the present value of our domestic pension plan obligations was 3.96 percent and 3.92 percent at October 31, 2024 and October 31, 2023, respectively.

Annual expense amounts are determined based on the discount rate used at the end of the prior year. Differences between actual and assumed investment returns on pension plan assets result in actuarial gains or losses that are amortized into expense over a period of years.

Economic assumptions have a significant effect on the amounts reported. The effect of a one percent change in the discount rate, expected return on assets and compensation increase is shown in the table below. Bracketed numbers represent decreases in expense and obligation amounts.

Income taxes – Income taxes are estimated based on income for financial reporting purposes. Deferred income taxes reflect the net tax effect of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes and certain changes in valuation allowances. We provide valuation allowances against deferred tax assets if, based on available evidence, it is more likely than not that some portion or all of the deferred tax assets will not be realized.

Nordson Corporation 27

Management believes the valuation allowances are adequate after considering future taxable income, allowable carryforward periods and ongoing prudent and feasible tax planning strategies. In the event we were to determine that we would be able to realize the deferred tax assets in the future in excess of the net recorded amount (including the valuation allowance), an adjustment to the valuation allowance would increase income in the period such determination was made. Conversely, should we determine that we would not be able to realize all or part of the net deferred tax asset in the future, an adjustment to the valuation allowance would be expensed in the period such determination was made.

Further, at each interim reporting period, we estimate an effective income tax rate that is expected to be applicable for the full year. Significant judgment is involved regarding the application of global income tax laws and regulations and when projecting the jurisdictional mix of income. Additionally, interpretation of tax laws, court decisions or other guidance provided by taxing authorities influences our estimate of the effective income tax rates. As a result, our actual effective income tax rates and related income tax liabilities may differ materially from our estimated effective tax rates and related income tax liabilities. Any resulting differences are recorded in the period they become known.

Atrion Acquisition

On August 21, 2024, the Company completed the acquisition of Atrion, pursuant to the terms of the Merger Agreement with Merger Sub and Atrion. Pursuant to the Merger Agreement, Merger Sub merged with and into Atrion (the “Merger”), with Atrion surviving the Merger as a wholly owned subsidiary of Nordson. Atrion is a leader in proprietary medical infusion fluid delivery and niche cardiovascular solutions and will operate within our Medical and Fluid Solutions segment. The all-cash acquisition of Atrion of $789,996, net of cash acquired, was funded using borrowings under our revolving credit facility, and the 364-day term loan agreement with a group of banks for a delayed draw term loan facility in the aggregate principal amount of $500,000 (the "364-Day Term Loan Agreement") (see Note 8 to the Consolidated Financial Statements for additional details) and cash on hand. Based on the fair value of the assets acquired and the liabilities assumed, a preliminary purchase price allocation resulted in the recognition of $494,279 of goodwill and $129,600 of identifiable intangible assets. The identifiable intangible assets consist primarily of $40,100 of tradenames (amortized over 15 years), $24,900 of technology (amortized over 15 years), and $64,600 of customer relationships (amortized over 19 years). The financial results of the Atrion acquisition are not expected to have a material impact on our Consolidated Financial Statements.

Results of Operations

Below is a detailed comparison of our results of operations for the fiscal years ended October 31, 2024 and October 31, 2023. For a discussion of other changes from the fiscal year ended October 31, 2023 to the fiscal year ended October 31, 2022, refer to Part II, Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operations, of our Annual Report on Form 10-K for the fiscal year ended October 31, 2023.

As used throughout this annual report, geographic regions include the Americas (United States, Canada, Mexico and Central and South America), Asia Pacific and Europe.

Consolidated Financial Results

Consolidated financial results for the years ended October 31, 2024, 2023 and 2022 were as follows:

Nordson Corporation 28

Net Sales

Net sales for the Industrial precision solutions (IPS), Medical and Fluid Solutions (MFS) and Advanced technology solutions (ATS) segments were as follows:

The IPS organic sales increase of 0.1 percent was driven by increases in packaging, nonwovens, and industrial coatings product lines, principally offset by declines in measurements and controls and polymer processing. The MFS organic sales decrease of 0.2% was driven by a decrease in the medical fluid components product line, partially offset by an increase in the fluid solutions product line. The ATS organic sales decrease of 11.4 percent was driven by lower demand in electronics dispense product lines as well as test and inspection product lines.

Net Sales by region were as follows:

Sales outside the United States accounted for 66.6 percent of total sales in 2024, as compared to 66.2 percent in 2023.

Operating Profit

Operating profit for the IPS, MFS and ATS segments were as follows:

Consolidated operating margin decreased by 50 basis points primarily driven by costs related to the first-year effect of acquisitions, which more than offset favorable product mix. Gross margins improved 1.0 percentage point reflecting the impact of favorable product mix and lower incremental inventory step-up amortization related to acquisitions of $7,703 in 2024 versus $8,862 in 2023, while the increase in selling and administrative expenses was primarily driven by acquisitions. IPS operating profit declined 140 basis points due to an unfavorable acquisition impact and severance costs. MFS operating margin declined 170 basis points due to $10,761 in fees, severance, and non-cash inventory charges associated with the Atrion acquisition which offset improvements in operating efficiencies. ATS operating margin improved by 90 basis points on lower sales volumes due to cost reduction actions and favorable mix.

Interest and Other expenses

Interest expense in 2024 was $88,924, an increase of $29,419, or 49.4 percent, from 2023. The increase reflects higher average debt levels compared to the prior year due to funding of acquisitions. Other expense in 2024 was $4,509 compared to other expense of $597 in 2023. Included in other expense in 2024 were $5,499 in net foreign currency losses, which were partially offset by pension gains. Included in the prior year’s other expense were $7,742 in foreign currency losses, which were largely offset by pension gains.

Nordson Corporation 29

Income tax expense

Income tax expense in 2024 was $118,197, or 20.2 percent of pre-tax income, as compared to $127,846, or 20.8 percent of pre-tax income in 2023. The effective tax rate decreased 60 basis points primarily due to a decline in the impact of foreign tax rate variances. The income tax provision for 2024 included a tax benefit of $4,037 due to our share-based payment transactions. Our income tax provision for 2023 included a tax benefit of $4,286 due to our share-based payment transactions.

Net Income

Net income was $467,284, or $8.11 per diluted share, in 2024, compared to net income of $487,493, or $8.46 per diluted share, in 2023. This represented a 4.1 percent decrease in net income and a 4.1 percent decrease in diluted earnings per share. The decrease of $0.35 per diluted share was primarily driven by higher interest expense in 2024 compared to 2023.

Liquidity and Capital Resources

Cash and cash equivalents increased $273 in 2024 to $115,952 as of October 31, 2024 compared to $115,679 as of October 31, 2023. Approximately 81 percent of our consolidated cash and cash equivalents were held at various foreign subsidiaries as of October 31, 2024.

A comparison of cash flow changes from 2024 to 2023 as follows:

The changes in operating assets and liabilities were principally driven by decreases in customer advance payments and income taxes payable. Additions to property, plant and equipment were largely driven by productivity and growth projects, including a new manufacturing facility.

We have a $1,150,000 unsecured multi-currency credit facility with a group of banks that provides for a term loan facility in the aggregate principal amount of $300,000, maturing in June 2026, and a multicurrency revolving credit facility in the aggregate principal amount of $850,000, maturing in June 2028. In anticipation of the ARAG acquisition, the Company entered into a €760,000 senior unsecured term loan facility with a group of banks in August 2023 (the "364-Day Term Loan Facility"). On September 13, 2023, the Company completed an underwritten public offering of $350,000 aggregate principal amount of the Company’s 5.600% Notes due 2028 (the “2028 Notes”) and $500,000 aggregate principal amount of the Company’s 5.800% Notes due 2033 (together with the 2028 Notes, the “Notes"). The Company used the net proceeds from the sale of the Notes to repay its borrowings under the 364-Day Term Loan Facility. At October 31, 2024, we had $280,000 outstanding on the term loan facility and $240,000 outstanding on the revolving credit facility.

In anticipation of the Atrion acquisition, the Company entered into a 364-Day Term Loan Agreement with Morgan Stanley Senior Funding for $500,000 on June 21, 2024, with a maturity date of August 20, 2025. In September 2024, the Company completed an underwritten public offering of $600,000 aggregate principal amount of 4.500% Notes due 2029 (the "2029 Notes"). The Company used a portion of the net proceeds from the sale of the 2029 Notes to repay all of the outstanding borrowings under the 364-Day Term Loan Agreement plus accrued and unpaid interest.

Nordson Corporation 30

Our operating performance, balance sheet position and financial ratios for 2024 remained strong. The Company is well-positioned to manage liquidity needs that arise from working capital requirements, capital expenditures and contributions related to pension and postretirement obligations, as well as principal and interest payments on our outstanding debt. Primary sources of capital to meet these needs, as well as other opportunistic investments, are a combination of cash on hand, which was $115,952 as of October 31, 2024, cash provided by operations, which was $556,193 in 2024, and available borrowings under our loan agreements and unused bank lines of credit which totaled $785,880 as of October 31, 2024. Cash from operations, which when combined with our available borrowing capacity and ready access to capital markets, is expected to be more than adequate to fund our liquidity needs over the twelve months and the foreseeable future thereafter. The Company believes it has the ability to generate and obtain adequate amounts of cash to meet its long-term needs for cash.

Contractual and Other Material Cash Obligations

The following table summarizes contractual and other material cash obligations as of October 31, 2024:

(1)Refer to Note 8 to the Consolidated Financial Statements for further discussion.

(2)Refer to Note 9 to the Consolidated Financial Statements for further discussion.

(3)Pension and postretirement plan funding amounts reflect known amounts over the next twelve months. Future amounts will be determined based on the future funded status of the plans and therefore cannot be estimated at this time. Refer to Note 6 to the Consolidated Financial Statements for further discussion.

(4)Purchase obligations primarily represent commitments for materials used in our manufacturing processes that are not recorded on our Consolidated Balance Sheet.

We believe that the combination of present capital resources, cash from operations and unused financing sources such as our credit facilities, including our revolving credit facility, are more than adequate to meet cash requirements for the twelve months and the foreseeable future thereafter. There are no significant restrictions limiting the transfer of funds from international subsidiaries to the parent company.

New Accounting Standards

In November 2023, the FASB issued ASU 2023-07, Segment Reporting (Topic 280): Improvements to Reportable Segment Disclosures. ASU 2023-07 requires enhanced disclosures about significant segment expenses and enhanced disclosures in interim periods. The guidance in ASU 2023-07 will be applied retrospectively and is effective for annual reporting periods in fiscal years beginning after December 15, 2023 and interim reporting periods in fiscal years beginning after December 31, 2024, with early adoption permitted. The Company is currently evaluating the impact that the adoption of ASU 2023-07 will have on its consolidated financial statements and disclosures and anticipates adoption in 2025.

In December 2023, the FASB issued ASU 2023-09, Income Taxes (Topic 740): Improvements to Income Tax Disclosures. ASU 2023-09 is intended to improve income tax disclosure requirements by requiring specific disclosure in the rate reconciliation and additional information for reconciling items that meet a quantitative threshold. The guidance in ASU 2023-09 will be effective for annual reporting periods in fiscal years beginning after December 15, 2024. The Company is currently evaluating the impact that the adoption of ASU 2023-09 will have on its consolidated financial statements and disclosures and anticipates adoption in fiscal 2026.

In November 2024, the FASB issued ASU 2024-03, Income Statement (Topic 220): Reporting Comprehensive Income. ASU 2024-03 does not change or remove current expense presentation requirements within the Consolidated Statements of Income. However, the amendments require disclosure, on an annual and interim basis, disaggregated information about certain income statement expense line items within the notes to the consolidated financial statements. The amendments in this update are

Nordson Corporation 31

effective for annual reporting periods beginning after December 15, 2026, and interim reporting periods beginning after December 15, 2027. The Company is currently evaluating the impact that the adoption of ASU 2024-03 will have on its consolidated financial statements and disclosures and anticipates adoption in fiscal 2028.

Effects of Foreign Currency

The impact of changes in foreign currency exchange rates on sales and operating results cannot be precisely measured due to fluctuating selling prices, sales volume, product mix and cost structures in each country where we operate. As a general rule, a weakening of the United States dollar relative to foreign currencies has a favorable effect on sales and net income, while a strengthening of the dollar has a detrimental effect.

In 2024, as compared with 2023, the United States dollar was slightly stronger against foreign currencies. If 2023 exchange rates had been in effect during 2024, sales would have been approximately $3,352 higher and third-party costs would have been approximately $903 higher. In 2023, as compared with 2022, the United States dollar was generally stronger against foreign currencies. If 2022 exchange rates had been in effect during 2023, sales would have been approximately $23,153 higher and third-party costs would have been approximately $15,210 higher. These effects on reported sales do not include the impact of local price adjustments made in response to changes in currency exchange rates.

Trends

Our solid historical performance is attributed to our diverse geographic and end market participation and our long-term commitment to develop and provide quality products and worldwide service to meet our customers’ changing needs.

Safe Harbor Statements Under the Private Securities Litigation Reform Act of 1995

This annual report, particularly “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” contains forward-looking statements within the meaning of the Securities Act of 1933, as amended, the Securities Exchange Act of 1934, as amended, and the Private Securities Litigation Reform Act of 1995. Such statements relate to, among other things, income, earnings, cash flows, changes in operations, operating improvements, businesses in which we operate and the United States and global economies. Statements in this annual report that are not historical are hereby identified as “forward-looking statements” and may be indicated by words or phrases such as “anticipates,” “supports,” “plans,” “projects,” “expects,” “believes,” “should,” “would,” “could,” “hope,” “forecast,” “management is of the opinion,” use of the future tense and similar words or phrases. These forward-looking statements reflect management’s current expectations and involve a number of risks and uncertainties. These risks and uncertainties include, but are not limited to, U.S. and international economic and political conditions; financial and market conditions; currency exchange rates and devaluations; possible acquisitions including the Company’s ability to complete and successfully integrate acquisitions, including the integration of Atrion and ARAG; the Company’s ability to successfully divest or dispose of businesses that are deemed not to fit with its strategic plan; the effects of changes in U.S. trade policy and trade agreements; the effects of changes in tax law; and the possible effects of events beyond our control, such as political unrest, including the conflicts in Europe and the Middle East, acts of terror, natural disasters and pandemics.

In light of these risks and uncertainties, actual events and results may vary significantly from those included in or contemplated or implied by such forward-looking statements. Readers are cautioned not to place undue reliance on such forward-looking statements. These forward-looking statements speak only as of the date made. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise, except as required by law.

Factors that could cause our actual results to differ materially from the expected results are discussed in Part 1, Item 1A, Risk Factors of this annual report.

Nordson Corporation 32

We operate internationally and enter into intercompany transactions denominated in foreign currencies. Consequently, we are subject to market risk arising from exchange rate movements between the dates foreign currencies are recorded and the dates they are settled. We regularly use foreign exchange contracts to reduce our risks related to most of these transactions. These contracts, primarily associated with the euro, yen and pound sterling, typically have maturities of 90 days or less, and generally require the exchange of foreign currencies for United States dollars at rates stated in the contracts. Gains and losses from changes in the market value of these contracts offset foreign exchange losses and gains, respectively, on the underlying transactions. We use foreign exchange contracts on a routine basis to help mitigate the risks related to transactions denominated in foreign currencies.

Refer to Note 11 to the Consolidated Financial Statements for further discussion about our foreign currency transactions and the methods and assumptions used to record these transactions.

A portion of our operations is financed with short-term and long-term borrowings and is subject to market risk arising from changes in interest rates.

The tables that follow present principal repayments and weighted-average interest rates on outstanding borrowings of fixed-rate debt.

We also have variable-rate long-term debt. The weighted average interest rate of this variable-rate debt was 5.66 percent at October 31, 2024 and 6.26 percent at October 31, 2023. As of October 31, 2024, a one percent increase in interest rates would result in additional annual interest expense of approximately $5,383 on the variable rate long-term debt.

Nordson Corporation 33

Consolidated Statements of Income

The accompanying notes are an integral part of the consolidated financial statements.

Nordson Corporation 34

Consolidated Statements of Comprehensive Income

The accompanying notes are an integral part of the consolidated financial statements.

Nordson Corporation 35

Consolidated Balance Sheets