Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
35K characters. Original on sec.gov ·
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Certain statements made in this report, or in other public filings, press releases, or other written or oral communications made by Nucor Corporation, a Delaware corporation incorporated in 1958, and its affiliates (collectively, "Nucor", the "Company", "we", "us", or "our"), which are not historical facts are forward-looking statements subject to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These forward-looking statements involve risks and uncertainties which we expect will or may occur in the future and may impact our business, financial condition and results of operations. The words “anticipate,” “believe,” “expect,” “intend,” “project,” “may,” “will,” “should,” “could” and similar expressions are intended to identify those forward-looking statements. These forward-looking statements reflect the Company’s best judgment based on current information, and, although we base these statements on circumstances that we believe to be reasonable when made, there can be no assurance that future events will not affect the accuracy of such forward-looking information. As such, the forward-looking statements are not guarantees of future performance, and actual results may vary materially from the projected results and expectations discussed in this report. Factors that might cause the Company’s actual results to differ materially from those anticipated in forward-looking statements include, but are not limited to: (1) competitive pressure on sales and pricing, including pressure from imports and substitute materials; (2) U.S. and foreign trade policies affecting steel imports or exports; (3) the sensitivity of the results of our operations to general market conditions, and in particular, prevailing market steel prices and changes in the supply and cost of raw materials, including pig iron, iron ore and scrap steel; (4) the availability and cost of electricity and natural gas, which could negatively affect our cost of steel production or result in a delay or cancellation of existing or future drilling within our natural gas drilling programs; (5) critical equipment failures and business interruptions; (6) market demand for steel products, which, in the case of many of our products, is driven by the level of nonresidential construction activity in the United States; (7) impairment in the recorded value of inventory, equity investments, fixed assets, goodwill or other long-lived assets; (8) uncertainties and volatility surrounding the global economy, including excess world capacity for steel production, inflation and interest rate changes; (9) fluctuations in currency conversion rates; (10) significant changes in laws or government regulations affecting environmental compliance, including legislation and regulations that result in greater regulation of greenhouse gas emissions that could increase our energy costs, capital expenditures and operating costs or cause one or more of our permits to be revoked or make it more difficult to obtain permit modifications; (11) the cyclical nature of the steel industry; (12) capital investments and their impact on our performance; (13) our safety performance; (14) our ability to integrate businesses we acquire; (15) the impact of any pandemic or public health situation; and (16) the risks discussed in “Item 1A. Risk Factors” of the Company’s Annual Report on Form 10-K for the year ended December 31, 2025.
Caution should be taken not to place undue reliance on the forward-looking statements included in this report. We assume no obligation to update any forward-looking statements except as may be required by law. In evaluating forward-looking statements, these risks and uncertainties should be considered, together with the other risks described from time to time in our reports and other filings with the United States Securities and Exchange Commission.
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with the unaudited condensed consolidated financial statements and the notes thereto included elsewhere in this report, as well as the audited consolidated financial statements and the notes thereto, “Item 1A. Risk Factors” and “Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations” contained in Nucor’s Annual Report on Form 10-K for the year ended December 31, 2025.
Overview
Nucor and its affiliates manufacture steel and steel products. Nucor also produces direct reduced iron ("DRI") for use in its steel mills. Through The David J. Joseph Company and its affiliates (collectively, "DJJ"), the Company also processes ferrous and nonferrous metals and brokers ferrous and nonferrous metals, pig iron, hot briquetted iron and DRI. Most of Nucor’s operating facilities and customers are located in North America. Nucor’s operations include international trading and sales companies that buy and sell steel and steel products manufactured by the Company and others. Nucor is North America’s largest recycler, using scrap steel as the primary raw material in producing steel and steel products.
Nucor reports its results in the following segments: steel mills, steel products and raw materials. The steel mills segment includes carbon and alloy steel in sheet, bars, structural and plate; steel trading businesses; rebar distribution businesses; and Nucor’s equity method investment in NuMit LLC. The steel products segment includes steel joists and joist girders, steel deck, fabricated concrete reinforcing steel, cold finished steel, precision castings, steel fasteners, metal building systems, insulated metal panels, steel grating, tubular products businesses, steel racking, piling products business, wire and wire mesh, overhead doors and utility towers and structures. The raw materials segment includes DJJ,
primarily a scrap broker and processor; Nu-Iron Unlimited and Nucor Steel Louisiana LLC ("Nucor Steel Louisiana"), two facilities that produce DRI used by the steel mills; and our natural gas production operations.
The average utilization rates of all operating facilities in the steel mills, steel products and raw materials segments were approximately 89%, 66% and 76%, respectively, in the first nine months of 2026, compared to approximately 83%, 62% and 72%, respectively, in the first nine months of 2025.
Results of Operations
Nucor reported net earnings attributable to Nucor stockholders of $1.32 billion, or $5.80 per diluted share, for the third quarter of 2026, which represented an increase compared to net earnings attributable to Nucor stockholders of $607 million, or $2.63 per diluted share, for the third quarter of 2025.
The increase in earnings in the third quarter of 2026 as compared to the third quarter of 2025 was driven primarily by the increase in earnings of the steel mills segment. Earnings in the steel mills segment increased due to higher average selling prices, increased volumes and higher metal margins. Shipments in the steel mills segment reached a record level in the third quarter of 2026, with the largest increases in our plate, bar and structural product groups. Demand continues to be strong across key end-use markets in the steel mills segment. Federal trade policies, including anti-dumping and countervailing duty laws in combination with Section 232 national security tariffs, are continuing to reduce the volume of unfairly traded imports into the United States.
Earnings in the steel products segment increased in the third quarter of 2026 as compared to the third quarter of 2025 due to increased volumes, most notably at our tubular products business, and higher average selling prices. These improvements were partially offset by higher steel input costs. Demand remained strong in key end markets for the steel products segment.
Earnings in the raw materials segment increased in the third quarter of 2026 as compared to the third quarter of 2025 primarily due to higher average selling prices, improved margins and increased shipments.
Nucor reported net earnings attributable to Nucor stockholders of $3.22 billion, or $14.06 per diluted share, for the first nine months of 2026, which represented an increase compared to net earnings attributable to Nucor stockholders of $1.37 billion, or $5.88 per diluted share, for the first nine months of 2025. The significant increase in comparable year-to-date earnings in 2026 as compared to 2025 was driven by higher earnings in each of the first three quarters of 2026 as compared to the corresponding quarters of 2025, led by the steel mills segment.
Earnings in the steel mills segment increased in the first nine months of 2026 as compared to the first nine months of 2025 due to higher average selling prices, increased volumes and higher metal margins. Steel mills segment earnings in the first nine months of 2026 also included a reduction to cost of products sold of $130 million in the second quarter related to cash refunds associated with prior periods’ raw materials procurement costs. The steel products segment had increased earnings in the first nine months of 2026 as compared to the first nine months of 2025 as increased volumes and higher average selling prices more than offset margin compression resulting from higher steel input costs, which was most pronounced in the first half of 2026.
Earnings in the raw materials segment increased in the first nine months of 2026 as compared to the first nine months of 2025 primarily due to increased average selling prices and shipments and the improved profitability of our DRI facilities.
Included in the first nine months of 2026 earnings was a non-cash benefit of $61 million, recognized in the second quarter, related to the increase in the value of our investment in Helion, a fusion energy company, after it completed a capital financing round. The increase is included as a reduction of marketing, administrative and other expenses in the first nine months of 2026.
The following discussion provides a greater quantitative and qualitative analysis of Nucor’s performance in the third quarter and first nine months of 2026 as compared to the third quarter and first nine months of 2025.
Net Sales
Net sales to external customers by segment for the third quarter and first nine months of 2026 and 2025 were as follows (in millions):
| Three Months (13 Weeks) Ended | Nine Months (39 Weeks) Ended | |||||||||||
| October 3, 2026 | October 4, 2025 | % Change | October 3, 2026 | October 4, 2025 | % Change | |||||||
| Steel mills | $6,980 | $5,152 | 35% | $19,497 | $15,312 | 27% | ||||||
| Steel products | 3,509 | 2,791 | 26% | 9,400 | 7,853 | 20% | ||||||
| Raw materials | 760 | 578 | 31% | 2,245 | 1,642 | 37% | ||||||
| Total net sales to external customers | $11,249 | $8,521 | 32% | $31,142 | $24,807 | 26% |
Net sales for the third quarter of 2026 increased 32% from the third quarter of 2025. Average sales price per ton increased 19% from $1,258 in the third quarter of 2025 to $1,493 in the third quarter of 2026. Total tons shipped to outside customers in the third quarter of 2026 were approximately 7,533,000 tons, an 11% increase from the third quarter of 2025.
Net sales for the first nine months of 2026 increased 26% from the first nine months of 2025. Average sales price per ton increased 14% from $1,215 in the first nine months of 2025 to $1,380 in the first nine months of 2026. Total tons shipped to outside customers in the first nine months of 2026 were approximately 22,565,000 tons, a 10% increase from the first nine months of 2025.
In the steel mills segment, sales tons for the third quarter and first nine months of 2026 and 2025 were as follows (in thousands):
| Three Months (13 Weeks) Ended | Nine Months (39 Weeks) Ended | |||||||||||
| October 3, 2026 | October 4, 2025 | % Change | October 3, 2026 | October 4, 2025 | % Change | |||||||
| Outside steel shipments | 5,662 | 4,976 | 14% | 16,940 | 15,246 | 11% | ||||||
| Inside steel shipments | 1,569 | 1,452 | 8% | 4,437 | 4,119 | 8% | ||||||
| Total steel shipments | 7,231 | 6,428 | 12% | 21,377 | 19,365 | 10% |
Net sales for the steel mills segment increased 35% in the third quarter of 2026 from the third quarter of 2025, due to a 14% increase in volume and a 19% increase in the average sales price per ton, from $1,038 to $1,233.
Net sales for the steel mills segment increased 27% in the first nine months of 2026 from the first nine months of 2025, due to an 11% increase in volumes and a 15% increase in the average selling price from $1,005 per ton in the first nine months of 2025 to $1,151 per ton in the first nine months of 2026.
Outside sales tonnage for the steel products segment for the third quarter and first nine months of 2026 and 2025 was as follows (in thousands):
| Three Months (13 Weeks) Ended | Nine Months (39 Weeks) Ended | |||||||||||
| October 3, 2026 | October 4, 2025 | % Change | October 3, 2026 | October 4, 2025 | % Change | |||||||
| Joist and deck sales | 237 | 254 | -7% | 620 | 653 | -5% | ||||||
| Rebar fabrication sales | 341 | 356 | -4% | 976 | 909 | 7% | ||||||
| Tubular products sales | 375 | 206 | 82% | 1,031 | 719 | 43% | ||||||
| Building systems sales | 74 | 62 | 19% | 188 | 174 | 8% | ||||||
| Other steel products sales | 336 | 305 | 10% | 992 | 917 | 8% | ||||||
| Total steel products sales | 1,363 | 1,183 | 15% | 3,807 | 3,372 | 13% |
Net sales for the steel products segment increased 26% in the third quarter of 2026 compared to the third quarter of 2025, due to a 15% increase in shipping volumes and a 9% increase in the average sales price per ton, from $2,358 to $2,576.
Net sales for the steel products segment increased 20% in the first nine months of 2026 compared to the first nine months of 2025, due to a 13% increase in shipping volumes and a 6% increase in the average sales price per ton, from $2,329 to $2,470.
Net sales for the raw materials segment increased 31% in the third quarter of 2026 compared to the third quarter of 2025, due primarily to higher average selling prices. In the third quarter of 2026, approximately 94% of outside sales for the raw materials segment were from the scrap brokerage operations of DJJ, and approximately 3% of outside sales were from the scrap processing operations of DJJ (approximately 95% and 3%, respectively, in the third quarter of 2025).
Net sales for the raw materials segment increased 37% in the first nine months of 2026 compared to the first nine months of 2025, due primarily to higher average selling prices. In the first nine months of 2026, approximately 95% of outside sales for the raw materials segment were from the scrap brokerage operations of DJJ, and approximately 3% of outside sales were from the scrap processing operations of DJJ (approximately 95% and 3%, respectively, in the first nine months of 2025).
The majority of the raw materials segment's total sales are to internal customers in the steel mills segment. Net sales to outside customers represented approximately 19% of the raw materials segment's total sales in the third quarter and first nine months of 2026 (approximately 18% and 17% in the third quarter and first nine months of 2025, respectively).
Gross Margins
Nucor recorded gross margins of $2.33 billion (21%) in the third quarter of 2026, which was an increase compared to $1.19 billion (14%) in the third quarter of 2025.
The largest driver of the increase in gross margins in the third quarter of 2026 as compared to the third quarter of 2025 was higher metal margins in the steel mills segment. Metal margin is the difference between the selling price of steel and the cost of scrap and scrap substitutes.
Scrap and scrap substitutes are the most significant element in the total cost of steel production. In the steel mills segment, the average scrap and scrap substitute cost per gross ton used in the third quarter of 2026 was $421, an 8% increase compared to $391 in the third quarter of 2025. Despite the increase in scrap and scrap substitute costs in the third quarter of 2026 as compared to the third quarter of 2025, total metal margin dollars increased as the increase in average selling prices and volumes outpaced the increase in scrap and scrap substitute costs.
Gross margins in the steel products segment increased in the third quarter of 2026 compared to the third quarter of 2025, primarily due to increases at our tubular business, and to a lesser extent, our metal buildings business.
Pre-operating and start-up costs of new facilities were approximately $124 million in the third quarter of 2026 and approximately $103 million in the third quarter of 2025. Pre-operating and start-up costs in the third quarter of 2026 primarily included costs related to the sheet mill in West Virginia. Pre-operating and start-up costs in the third quarter of 2025 primarily included costs related to the sheet mill in West Virginia and the melt shop expansion in Arizona. Nucor defines pre-operating and start-up costs, all of which are expensed, as the losses attributable to facilities or major projects that are either under construction or in the early stages of operation. Once these facilities or projects have attained a utilization rate that is consistent with our similar operating facilities, Nucor no longer considers them to be in start-up.
Gross margins in the raw materials segment increased in the third quarter of 2026 as compared to the third quarter of 2025 primarily due to the increased earnings of our DRI and scrap processing operations.
Nucor recorded gross margins of $5.86 billion (19%) in the first nine months of 2026, which was an increase compared to $3.02 billion (12%) in the first nine months of 2025.
The largest driver of the increase in gross margins in the first nine months of 2026 as compared to the first nine months of 2025 was the increased earnings and metal margins in the steel mills segment.
The average scrap and scrap substitute cost per gross ton used in the first nine months of 2026 was $416, a 5% increase compared to $396 in the first nine months of 2025. This increase was more than offset by the previously mentioned increases in average sales prices and volumes.
The steel mills segment's gross margins in the first nine months of 2026 also benefited from a $130 million reduction in cost of products sold related to cash refunds associated with prior periods' raw material procurement costs.
Pre-operating and start-up costs of new facilities decreased to approximately $352 million in the first nine months of 2026 from approximately $408 million in the first nine months of 2025. Pre-operating and start-up costs in the first nine months of 2026 primarily included costs related to the sheet mill in West Virginia and the coating complex at our sheet mill in Indiana. Pre-operating and start-up costs in the first nine months of 2025 primarily included costs related to the sheet mill in West Virginia, the plate mill in Kentucky, the melt shop expansion in Arizona and the rebar micro mill in North Carolina.
Gross margins in the raw materials segment increased in the first nine months of 2026 as compared to the first nine months of 2025 primarily due to the increased earnings of our DRI and scrap processing operations.
Marketing, Administrative and Other Expenses A major component of marketing, administrative and other expenses is profit sharing and other incentive compensation costs. These profit sharing and other incentive compensation costs, which are based upon and fluctuate with Nucor’s financial performance, increased by $120 million in the third quarter of 2026 as compared to the third quarter of 2025, and increased by $294 million in the first nine months of 2026 as compared to the first nine months of 2025. These increases were due to Nucor's increased profitability in the third quarter and first nine months of 2026 as compared to the respective prior year periods, which resulted in significantly increased accruals related to profit sharing and other incentive compensation.
During the second quarter of 2026, Nucor recorded a non-cash $61 million increase in the value of its investment in Helion, a fusion energy company, after it completed a capital financing round during the quarter. The increase is included as a reduction of marketing, administrative and other expenses in the first nine months of 2026.
Losses and Impairments of Assets
Included in the third quarter and first nine months of 2026 net earnings was $17 million and $32 million, respectively, of losses and impairments of assets. The $17 million in charges recorded in the third quarter of 2026 consisted of a $7 million impairment charge in the steel mills segment and $10 million of impairment charges related to certain assets in corporate/eliminations. The remaining $15 million (recorded in the first quarter of 2026) consisted of impairment charges related to certain assets in the raw materials segment.
Included in the first nine months of 2025 net earnings was $40 million of losses and impairments of assets (none in the third quarter of 2025). Those charges consisted of the following: $19 million related to the closure or repurposing of certain facilities in the steel products segment; $17 million related to the repurposing of a facility in the steel mills segment; and $4 million related to the write-off of certain assets in the raw materials segment.
Interest Expense (Income)
Net interest expense for the third quarter and first nine months of 2026 and 2025 was as follows (in millions):
| Three Months (13 Weeks) Ended | Nine Months (39 Weeks) Ended | |||||||||||||||
| October 3, 2026 | October 4, 2025 | October 3, 2026 | October 4, 2025 | |||||||||||||
| Interest expense | $ | 32 | $ | 38 | $ | 107 | $ | 138 | ||||||||
| Interest income | (25 | ) | (23 | ) | (69 | ) | (90 | ) | ||||||||
| Interest expense, net | $ | 7 | $ | 15 | $ | 38 | $ | 48 |
Interest expense decreased in the third quarter and first nine months of 2026 compared to the third quarter and first nine months of 2025 mainly due to an increase in capitalized interest. Interest income increased in the third quarter of 2026 compared to the third quarter of 2025 due to higher average investment balances, partially offset by lower average interest rates on those investments. Interest income decreased in the first nine months of 2026 compared to the first nine months of 2025 due to lower average investment balances and average interest rates on those investments.
Earnings Before Income Taxes and Noncontrolling Interests
The table below presents earnings before income taxes and noncontrolling interests by segment for the third quarter and first nine months of 2026 and 2025 (in millions). The changes between periods were driven by the quantitative and qualitative factors previously discussed.
| Three Months (13 Weeks) Ended | Nine Months (39 Weeks) Ended | |||||||||||||||
| October 3, 2026 | October 4, 2025 | October 3, 2026 | October 4, 2025 | |||||||||||||
| Steel mills | $ | 1,788 | $ | 793 | $ | 4,472 | $ | 1,867 | ||||||||
| Steel products | 465 | 319 | 1,094 | 999 | ||||||||||||
| Raw materials | 105 | 43 | 296 | 129 | ||||||||||||
| Corporate/eliminations | (491 | ) | (272 | ) | (1,274 | ) | (928 | ) | ||||||||
| $ | 1,867 | $ | 883 | $ | 4,588 | $ | 2,067 |
Noncontrolling Interests
Noncontrolling interests represent the income attributable to the noncontrolling partners of Nucor’s joint ventures, Nucor-Yamato Steel Company (Limited Partnership) ("NYS"), California Steel Industries, Inc. ("CSI") and Nucor-JFE Steel Mexico, S. de R.L. de C.V. ("NJSM"). Nucor owns a 51% controlling interest in each of NYS, CSI and NJSM. The increase in earnings attributable to noncontrolling interests in the third quarter of 2026 compared to the third quarter of 2025 was due primarily to the increased earnings of NYS. The increase in earnings attributable to noncontrolling interests in the first nine months of 2026 compared to the first nine months of 2025 was due primarily to the increased earnings of NYS.
Provision for Income Taxes
The effective tax rate for the third quarter of 2026 was 21.1% compared to 22.6% for the third quarter of 2025. The expected effective tax rate for the full year 2026 is between 20.0% and 22.0%.
Nucor is subject to taxation in the United States (“U.S.”), as well as various state and foreign jurisdictions. Nucor has concluded U.S. federal income tax matters for the tax years through 2022. The tax years 2023 through 2025 remain open to examination by the Internal Revenue Service. The 2015 through 2021 Canadian income tax returns for Nucor Rebar Fabrication Group Inc. (formerly known as Harris Steel Group Inc.) and certain related affiliates are currently under examination by the Canada Revenue Agency. Additional state and foreign taxing authorities are examining open tax years. The resolution of these audits is not expected to have a material impact on our consolidated financials. The tax years 2018 through 2025 remain open to examination by other major taxing jurisdictions to which Nucor is subject (primarily Canada, Trinidad & Tobago, and other state and local jurisdictions).
Net Earnings Attributable to Nucor Stockholders and Return on Equity
Nucor reported net earnings attributable to Nucor stockholders of $1.32 billion, or $5.80 per diluted share, in the third quarter of 2026 as compared to net earnings attributable to Nucor stockholders of $607 million, or $2.63 per diluted share, in the third quarter of 2025. Net earnings attributable to Nucor stockholders as a percentage of net sales were 11.7% and 7.1% in the third quarter of 2026 and 2025, respectively.
Nucor reported net earnings attributable to Nucor stockholders of $3.22 billion, or $14.06 per diluted share, in the first nine months of 2026 as compared to net earnings attributable to Nucor stockholders of $1.37 billion, or $5.88 per diluted share, in the first nine months of 2025. Net earnings attributable to Nucor stockholders as a percentage of net sales were 10.3% and 5.5% in the first nine months of 2026 and 2025, respectively. Annualized return on average stockholders’ equity was 19.6% and 8.9% in the first nine months of 2026 and 2025, respectively.
Outlook
We expect earnings in the fourth quarter of 2026 to be generally in-line with or modestly higher than the third quarter. In the steel mills segment, we expect stable earnings due to higher realized pricing offset by seasonally lower volumes and higher costs. In the steel products segment, we expect stable earnings on higher realized pricing and seasonally lower volumes. The raw materials segment is expected to have slightly lower earnings due to lower realized DRI pricing. Intersegment profit eliminations are expected to decrease in the fourth quarter.
Nucor’s largest exposure to market risk is in our steel mills and steel products segments. Our largest single customer in the third quarter of 2026 represented approximately 5% of sales and has consistently paid within terms. In the raw materials segment, we are exposed to price fluctuations related to the purchase of scrap and scrap substitutes, pig iron and iron ore. Businesses within the steel mills segment account for the majority of the raw materials segment’s sales.
Liquidity and Capital Resources
We currently have the highest credit ratings of any steel producer headquartered in North America, with an A- long-term rating from Standard & Poor’s, an A- long-term rating from Fitch Ratings and an A3 long-term rating from Moody’s. Our credit ratings are dependent, however, upon a number of factors, both qualitative and quantitative, and are subject to change at any time. The disclosure of our credit ratings is made in order to enhance investors’ understanding of our sources of liquidity and the impact of our credit ratings on our cost of funds.
Our liquidity position as of October 3, 2026 remained strong, consisting of total cash and cash equivalents and short-term investments of $3.64 billion ($2.70 billion as of December 31, 2025). Approximately $1.01 billion of the cash and cash equivalents position at October 3, 2026 was held by our majority-owned joint ventures as compared to approximately $931 million at December 31, 2025.
Cash provided by operating activities was $4.52 billion in the first nine months of 2026 as compared to $2.44 billion in the first nine months of 2025. The $2.09 billion increase was primarily driven by net earnings before noncontrolling interests of $3.62 billion for the first nine months of 2026, which represented an increase of $2.01 billion from net earnings before noncontrolling interests for the prior year period of $1.62 billion.
The funding of our working capital in the first nine months of 2026 decreased by $58 million compared to the first nine months of 2025. The most significant uses of cash were the change in inventories which used $560 million in the first nine months of 2026 compared to $295 million in the first nine months of 2025, and the change in accounts receivable which used an additional $589 million in cash in the first nine months of 2026 compared to the same period in 2025. These changes were offset by the change in other operating activities which provided cash of $324 million in the first nine months of 2026 compared to $29 million in the first nine months of 2025 and the change in salaries, wages and related accruals which provided $438 million more in cash during the first nine months of 2026 compared to the same period in 2025.
The current ratio was 2.5 at the end of the third quarter of 2026 and 2.9 at year-end 2025.
Cash used in investing activities in the first nine months of 2026 was $1.54 billion as compared to $2.51 billion in the first nine months of 2025, a decrease of $974 million. Cash used for capital expenditures of $1.86 billion in the first nine months of 2026 decreased by $759 million as compared to the same period of 2025 primarily due to the sheet mill under construction in West Virginia which is nearing completion. Capital expenditures for 2026 are estimated to be approximately $2.50 billion as compared to $3.42 billion in 2025. The projects that we anticipate will have the largest capital expenditures in 2026 are the sheet mill under construction in West Virginia, the construction of two manufacturing locations to expand Nucor Towers & Structures, and the galvanizing line at our sheet mill in South Carolina.
Cash used in financing activities in the first nine months of 2026 was $1.77 billion as compared to $1.27 billion in the first nine months of 2025. The primary uses of cash in the first nine months of 2026 were stock repurchases of $976 million, which increased compared to $600 million in the first nine months of 2025. The primary uses of cash in the first nine months of 2025 were repayments of long-term debt of $1.01 billion which was largely offset by proceeds from the issuance and sale of long-term debt, net of discount to the public, of $997 million. In the first nine months of 2025, Nucor issued and sold $500 million aggregate principal amount of its 4.650% Notes due 2030 and $500 million aggregate principal amount of its 5.100% Notes due 2035. Net proceeds from the issuance and sale of these Notes were used to redeem all of the outstanding $500 million aggregate principal amount of our 2.000% Notes due 2025 and $500 million aggregate principal amount of our 3.950% Notes due 2025 (collectively, the "2025 Notes") pursuant to the terms of the indenture governing the 2025 Notes.
On March 11, 2025, Nucor amended and restated its revolving credit facility to increase the borrowing capacity from $1.75 billion to $2.25 billion and to extend its maturity date to March 11, 2030. The revolving credit facility includes only one financial covenant, which is a limit of 60% on the ratio of funded debt to total capital. In addition, the revolving credit facility contains customary non-financial covenants, including a limit on Nucor’s ability to pledge the Company’s assets and a limit on consolidations, mergers and sales of assets. As of October 3, 2026, the funded debt to total capital ratio was 22.7% and we were in compliance with all non-financial covenants under the revolving credit facility. No borrowings were outstanding under the revolving credit facility as of October 3, 2026.
In September 2026, Nucor’s Board of Directors declared a quarterly cash dividend on Nucor’s common stock of $0.56 per share, payable on November 10, 2026 to stockholders of record on September 30, 2026. This dividend is Nucor’s 214th consecutive quarterly cash dividend.
Funds provided from operations, cash and cash equivalents, short-term investments and new borrowings under our existing credit facilities are expected to be adequate to meet future capital expenditure and working capital requirements for existing operations for at least the next 24 months. We also believe we have adequate access to capital markets for liquidity purposes.
Previous: Item 1. Financial Statements (Unaudited) · Next: Item 3. Quantitative and Qualitative Disclosures About Market Risk