Textron 10-K 2013-12-28

10-K 1 a13-26941_110k.htm 10-K

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

[ x ] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 28, 2013

or

[ ] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from to .

Commission File Number 1-5480

Textron Inc.

(Exact name of registrant as specified in its charter)

Registrant’s Telephone Number, Including Area Code: (401) 421-2800

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ü No___

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes No ü

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ü No___

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ü No____

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [ ü ]

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer [ ü ] Accelerated filer [ ]

Non-accelerated filer [ ] Smaller reporting company [ ]

(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes No ü

The aggregate market value of the registrant’s Common Stock held by non-affiliates at June 28, 2013 was approximately $7.3 billion based on the New York Stock Exchange closing price for such shares on that date. The registrant has no non-voting common equity.

At February 1, 2014, 282,500,851 shares of Common Stock were outstanding.

Documents Incorporated by Reference

Part III of this Report incorporates information from certain portions of the registrant’s Definitive Proxy Statement for its Annual Meeting of Shareholders to be held on April 23, 2014.

PART I

Textron Inc. is a multi-industry company that leverages its global network of aircraft, defense, industrial and finance businesses to provide customers with innovative products and services around the world. We have approximately 32,000 employees worldwide. Textron Inc. was founded in 1923 and reincorporated in Delaware on July 31, 1967. Unless otherwise indicated, references to “Textron Inc.,” the “Company,” “we,” “our” and “us” in this Annual Report on Form 10-K refer to Textron Inc. and its consolidated subsidiaries.

We conduct our business through five operating segments: Cessna, Bell, Textron Systems and Industrial, which represent our manufacturing businesses, and Finance, which represents our finance business. A description of the business of each of our segments is set forth below. Our business segments include operations that are unincorporated divisions of Textron Inc. and others that are separately incorporated subsidiaries. Financial information by business segment and geographic area appears in Note 15 to the Consolidated Financial Statements on pages 75 through 76 of this Annual Report on Form 10-K. The following description of our business should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on pages 18 through 37 of this Annual Report on Form 10-K. Information included in this Annual Report on Form 10-K refers to our continuing businesses unless otherwise indicated.

Cessna Segment

Cessna is the world’s leading general aviation company based on unit sales with two principal lines of business: aircraft sales and aftermarket services. Aircraft sales include Citation jets, Caravan single-engine utility turboprops and single-engine utility and high-performance piston aircraft. Aftermarket services include parts, maintenance, inspection and repair services. Revenues in the Cessna segment accounted for approximately 23%, 25% and 26% of our total revenues in 2013, 2012 and 2011, respectively. Revenues for Cessna’s principal lines of business were as follows:

The family of jets currently produced by Cessna includes the Mustang, Citation M2, Citation CJ2+, Citation CJ3, Citation CJ4, Citation XLS+ and the new Citation Sovereign+. The new Citation X+, recently verified by the FAA as the fastest civilian jet in the world, is expected to be certified in early 2014. In addition, Cessna is developing the Citation Latitude, a midsize business jet scheduled for first flight in 2014 and expected to enter into service in 2015, as well as the Citation Longitude, a super midsize business jet expected to enter into service in 2017.

The Cessna Caravan is the world’s best-selling utility turboprop. Caravans are used in the United States primarily for overnight express package shipments and for personal transportation. International uses of Caravans include air taxi service, humanitarian flights, tourism and freight transport. Cessna also offers a single-engine piston product line that includes the Skyhawk SP, Stationair and the new high performance TTx which we began delivering during 2013. The Turbo Skylane JT-A, Cessna’s first Jet-A fueled piston aircraft, is expected to be certified and to begin delivering in 2014.

The Citation family of aircraft currently is supported by 15 Citation Service Centers owned or operated by Cessna, two of which are co-located with Bell Helicopter, along with authorized independent service stations and centers located in more than 25 countries throughout the world. Cessna-owned Service Centers provide customers with 24-hour service and maintenance. Cessna also provides around-the-clock parts support for Citation aircraft. Cessna offers an array of service options for Citation aircraft, known as ServiceDirect®, which delivers service capabilities directly to customer locations with a Mobile Service Unit fleet of 22 vehicles in the United States, Canada and Europe. Cessna Caravan and single-engine piston customers receive product support through independently owned service stations and around-the-clock parts support through Cessna.

Cessna markets its products worldwide through its own sales force, as well as through a network of authorized independent sales representatives. Cessna has several competitors domestically and internationally in various market segments. Cessna’s aircraft compete with other aircraft that vary in size, speed, range, capacity and handling characteristics on the basis of price, product quality and reliability, direct operating costs, product support and reputation.

Bell Segment

Bell Helicopter is one of the leading suppliers of military and commercial helicopters, tiltrotor aircraft, and related spare parts and services in the world. Revenues for Bell accounted for approximately 37%, 35% and 31% of our total revenues in 2013, 2012 and 2011, respectively. Revenues by Bell’s principal lines of business were as follows:

Bell supplies advanced military helicopters and support to the U.S. Government and to military customers outside the United States. Bell’s primary U.S. Government programs are the V-22 tiltrotor aircraft and the H-1 helicopters. Bell is one of the leading suppliers of helicopters to the U.S. Government and, in association with The Boeing Company (Boeing), the only supplier of military tiltrotor aircraft. Tiltrotor aircraft are designed to provide the benefits of both helicopters and fixed-wing aircraft. Through its strategic alliance with Boeing, Bell produces and supports the V-22 tiltrotor aircraft for the U.S. Department of Defense (DoD). During 2013, the Bell Boeing V-22 program was awarded a five-year contract for the production and delivery of an additional 99 V-22 tiltrotor aircraft from 2014 through 2019. The U.S. Marine Corps H-1 helicopter program includes a utility model and an advanced attack model, the UH-1Y and the AH-1Z, respectively, which have 84% parts commonality between them. Bell also continues to support the OH-58D Kiowa Warrior armed scout helicopter for the U.S. Army.

Through its commercial business, Bell is a leading supplier of commercially certified helicopters and support to corporate, offshore petroleum exploration and development, utility, charter, police, fire, rescue, emergency medical helicopter operators and foreign governments. Bell produces a variety of commercial aircraft types, including light single- and twin-engine helicopters and medium twin-engine helicopters, along with other related products. The helicopters currently offered by Bell for commercial applications include the 206L-4, 407, 407GX, 412EP/EPI, 429 and Huey II. Bell’s 525 Relentless, its first super medium commercial helicopter, is currently in development with a projected first flight in 2014. In addition, during 2013 Bell announced the development of the Bell SLS, a high performance, short-light single helicopter, which will reenter Bell into the market it created with the introduction of the original JetRanger.

For both its military programs and its commercial products, Bell provides post-sale support and service for its installed base of approximately 13,000 helicopters through a network of 8 Bell-operated service centers, two of which are co-located with Cessna, 106 independent service centers located in 34 countries and four supply centers that are located worldwide. Collectively, these service sites offer a complete range of logistics support, including parts, support equipment, technical data, training devices, pilot and maintenance training, component repair and overhaul, engine repair and overhaul, aircraft modifications, aircraft customizing, accessory manufacturing, contractor maintenance, field service and product support engineering.

Bell competes against a number of competitors throughout the world for its helicopter business and its parts and support business. Competition is based primarily on price, product quality and reliability, product support, performance and reputation.

Textron Systems Segment

Textron Systems’ product lines consist of unmanned aircraft systems, marine and land systems, weapons and sensors and a variety of defense and aviation mission support products and services. Textron Systems is a supplier to the defense, aerospace, homeland security and general aviation markets, and represents approximately 14%, 14% and 17% of Textron’s revenues in 2013, 2012 and 2011, respectively. While this segment sells most of its products to U.S. Government customers, it also sells products to customers outside the U.S. through foreign military sales sponsored by the U.S. Government and directly through commercial sales channels. Textron Systems competes on the basis of technology, contract performance, price, product quality and reliability, product support and reputation. Revenues by Textron Systems’ product lines were as follows:

Unmanned Aircraft Systems

Unmanned Aircraft Systems (UAS) consists of the AAI UAS and AAI Logistics & Technical Services businesses. AAI UAS has designed, manufactured and fielded combat-proven unmanned aircraft systems for more than 25 years, including the U.S. Army’s premier tactical UAS, the Shadow. AAI UAS’s unmanned aircraft and interoperable command and control technologies provide critical situational awareness and actionable intelligence for users worldwide. AAI Logistics & Technical Services provides logistical support for various unmanned aircraft systems as well as training and supply chain services to government and commercial customers worldwide.

Marine and Land Systems

The Marine and Land Systems business is operated as Textron Marine & Land Systems (TMLS). TMLS is a world leader in the design, production and support of armored vehicles, turrets and related subsystems as well as advanced marine craft. TMLS produces a family of extremely mobile, highly protective vehicles for the U.S. Army and international allies, and is developing the U.S. Navy’s next generation air cushion vehicle.

Weapons and Sensors

The Weapons and Sensors business is operated as Textron Defense Systems (TDS). This business consists of state-of-the-art smart weapons; airborne and ground-based sensors and surveillance systems; and protection systems for the defense, aerospace and homeland security industries. TDS primarily sells its products to international allies through foreign military sales.

Mission Support and Other

Mission Support and Other includes three businesses: AAI Test & Training, Lycoming and Overwatch. AAI Test & Training provides high technology test equipment and electronic warfare test and training solutions. Lycoming specializes in the engineering, manufacture, service and support of piston aircraft engines for the general aviation and remotely piloted aircraft markets. Overwatch, operated as Overwatch Geospatial Solutions and Overwatch Intelligence Solutions, provides intelligence software solutions for U.S. and international defense, intelligence and law enforcement communities.

In December 2013, we acquired two flight simulation and aircraft training product companies, Mechtronix, Inc. and OPINICUS Corporation. We intend to combine these businesses with our existing training and simulation business, currently included in the UAS product line, which serves the military aircraft market, to form Textron Simulation & Training Systems. This business designs, develops, installs and provides maintenance of advanced full flight simulators for both rotary- and fixed-wing aircraft and designs, markets and supports aviation training products and related services for airlines, aircraft OEMs, flight training centers and training organizations worldwide.

Industrial Segment

Our Industrial segment designs and manufactures a variety of products under three principal product lines. Industrial segment revenues were as follows:

Fuel Systems and Functional Components

Our Fuel Systems and Functional Components product line is operated by our Kautex business unit, which is headquartered in Bonn, Germany. Kautex is a leading developer and manufacturer of blow-molded plastic fuel systems for cars, light trucks, all-terrain vehicles, windshield and headlamp washer systems for automobiles and selective catalytic reduction systems used to reduce emissions from diesel engines. Kautex serves the global automobile market, with operating facilities near its major customers around the world. In addition, Kautex produces cast iron engine camshafts in North America. From facilities in Germany and Poland, Kautex develops and produces plastic bottles and containers for food, household, laboratory and industrial uses. Revenues of Kautex accounted for approximately 15%, 15% and 16% of our total revenues in 2013, 2012 and 2011, respectively.

Our automotive products have several major competitors worldwide, some of which are affiliated with the original equipment manufacturers that comprise our targeted customer base. Competition typically is based on a number of factors including price, technology, environmental performance, product quality and reliability, prior experience and available manufacturing capacity.

Golf, Turf Care and Light Transportation Vehicles

Our Golf, Turf Care and Light Transportation Vehicles product line includes the products designed, manufactured and sold by our E-Z-GO and Jacobsen business units.

E-Z-GO designs, manufactures and sells golf cars, off-road utility vehicles and light transportation vehicles under the E-Z-GO, Cushman and Bad Boy Buggies brand names. Although E-Z-GO is best known for its electric-vehicle technology, it also manufactures and sells models powered by internal combustion engines. E-Z-GO’s diversified customer base includes golf courses and resorts, government agencies and municipalities, consumers, and commercial and industrial users such as factories, warehouses, airports and educational and corporate campuses. Sales are made through a combination of factory direct resources and a network of independent distributors and dealers worldwide. E-Z-GO has two major competitors for golf cars and several other competitors for off-road and light transportation vehicles. Competition is based primarily on price, product quality and reliability, product support and reputation.

Jacobsen designs, manufactures and sells professional turf-maintenance equipment, as well as specialized turf-care vehicles. Brand names include Ransomes, Jacobsen and Cushman. Jacobsen’s customers include golf courses, resort communities, sporting venues and municipalities. Products are sold primarily through a worldwide network of distributors and dealers, as well as factory direct. Jacobsen has two major competitors for professional turf-maintenance equipment and several other major competitors for specialized turf-care products. Competition is based primarily on price, product features, product quality and reliability and product support.

Powered Tools, Testing and Measurement Equipment

Our Greenlee business unit designs and manufactures powered equipment, electrical test and measurement instruments, mechanical and hydraulic tools, cable connectors, and fiber optic assemblies under the Greenlee, Klauke, Paladin Tools and Tempo brand names. These products are used principally in the construction, maintenance, telecommunications, data communications, utility and plumbing industries. During 2013, our Greenlee business acquired Sherman & Reilly, Inc., a manufacturer of underground and aerial transmission and distribution products, and HD Electric Company, a designer and manufacturer of power utility products. Greenlee distributes its products through a global network of sales representatives and distributors and also sells its products directly to home improvement retailers and original equipment manufacturers. Through joint ventures in North America and China, Greenlee also sells its products to the plumbing, industrial manufacturing and related industries. Greenlee faces competition from numerous manufacturers based primarily on price, delivery lead time, product quality and reliability.

Finance Segment

Our Finance segment, or the Finance group, is a commercial finance business that consists of Textron Financial Corporation (TFC) and its consolidated subsidiaries. The Finance segment provides financing primarily to purchasers of new Cessna aircraft and Bell helicopters as well as pre-owned Cessna aircraft and Bell helicopters on a limited basis. The majority of new finance receivables are cross-border transactions for aircraft sold outside of the U.S. New originations in the U.S. are primarily for purchasers who had difficulty in accessing other sources of financing for the purchase of Textron-manufactured products. In 2013, 2012 and 2011, our Finance group paid our Manufacturing group $248 million, $309 million and $284 million, respectively, related to the sale of Textron-manufactured products to third parties that were financed by the Finance group.

The commercial finance business traditionally is extremely competitive. Our Finance segment is subject to competition from various types of financing institutions, including banks, leasing companies, commercial finance companies and finance operations of equipment vendors. Competition within the commercial finance industry primarily is focused on price, term, structure and service.

Our Finance segment’s largest business risk is the collectability of its finance receivable portfolio. See “Finance Portfolio Quality” in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” on page 28 for information about the Finance segment’s credit performance.

Backlog

Our backlog at the end of 2013 and 2012 is summarized below:

Approximately 43% of our total backlog at December 28, 2013 represents orders that are not expected to be filled in 2014. Orders from Cessna customers, which cover a wide spectrum of industries and individuals worldwide, are included in backlog when the customer enters into a definitive purchase agreement and the initial customer deposit is received. We work with our customers to provide estimated delivery dates, which may be adjusted based on customer needs or our production schedule, but do not establish definitive delivery dates until approximately six months before expected delivery. There is considerable uncertainty as to when or whether backlog will convert to revenues as the conversion depends on production capacity, customer needs and credit availability; these factors also may be impacted by the economy and public perceptions of private corporate jet usage. While backlog is an indicator of future revenues, we cannot reasonably estimate the year each order in backlog ultimately will result in revenues and cash flows. Orders remain in backlog until the aircraft is delivered or upon cancellation by the customer. Upon cancellation, deposits are used to defray costs, including remarketing fees, cost to reconfigure the aircraft and other costs incurred as a result of the cancellation. Remaining deposits, if any, may be retained or refunded at our discretion.

Backlog with the U.S. Government in the above table includes only funded amounts as the U.S. Government is obligated only up to the amount of funding formally appropriated for a contract. Bell’s backlog includes $2.7 billion related to a multi-year procurement contract with the U.S. Government for the purchase of V-22 tiltrotor aircraft.

U.S. Government Contracts

In 2013, approximately 30% of our consolidated revenues were generated by or resulted from contracts with the U.S. Government. This business is subject to competition, changes in procurement policies and regulations, the continuing availability of funding, which is dependent upon congressional appropriations, national and international priorities for defense spending, world events, and the size and timing of programs in which we may participate.

Our contracts with the U.S. Government generally may be terminated by the U.S. Government for convenience or if we default in whole or in part by failing to perform under the terms of the applicable contract. If the U.S. Government terminates a contract for convenience, we normally will be entitled to payment for the cost of contract work performed before the effective date of termination, including, if applicable, reasonable profit on such work, as well as reasonable termination costs. If, however, the U.S. Government terminates a contract for default, generally: (a) we will be paid the contract price for completed supplies delivered and accepted and services rendered, an agreed-upon amount for manufacturing materials delivered and accepted and for the protection and preservation of property, and an amount for partially completed products accepted by the U.S. Government; (b) the U.S. Government may not be liable for our costs with respect to unaccepted items and may be entitled to repayment of advance payments and progress payments related to the terminated portions of the contract; (c) the U.S. Government may not be liable for assets we own and utilize to provide services under the “fee-for-service” contracts; and (d) we may be liable for excess costs incurred by the U.S. Government in procuring undelivered items from another source.

Research and Development

Information regarding our research and development expenditures is contained in Note 1 to the Consolidated Financial Statements on page 53 of this Annual Report on Form 10-K.

Patents and Trademarks

We own, or are licensed under, numerous patents throughout the world relating to products, services and methods of manufacturing. Patents developed while under contract with the U.S. Government may be subject to use by the U.S. Government. We also own or license active trademark registrations and pending trademark applications in the U.S. and in various foreign countries or regions, as well as trade names and service marks. While our intellectual property rights in the aggregate are important to the operation of our business, we do not believe that any existing patent, license, trademark or other intellectual property right is of such importance that its loss or termination would have a material adverse effect on our business taken as a whole. Some of these trademarks, trade names and service marks are used in this Annual Report on Form 10-K and other reports, including: Aeronautical Accessories; AAI; acAlert; Ascent; Aerosonde; AH-1Z; Ambush; Arc Horizon; Bad Boy Buggies; BattleHawk; Bell; Bell Helicopter; Bravo; Cadillac Gage; Caravan; Caravan Amphibian; Caravan 675; Cessna; Cessna 350; Cessna 400; Cessna Corvalis TTX; Cessna Turbo Skylane JT-A; Citation; CITATION ALPINE EDITION; CitationAir; CitationAir Jetcard; Citation Encore+; Citation Latitude; Citation Longitude; Citation M2; Citation Sovereign; Citation TEN; Citation X; Citation XLS+; CJ1+; CJ2+; CJ3; CJ4; Clairity; CLAW; Commando; Corvalis; Cushman; Eclipse; Excel; Extreme; Extreme Ti-METAL; E-Z-GO; Gator Eye; Gator Grips; Grand Caravan; Greenlee; H-1; HDE; Huey; Huey II; iCommand; IE2; Instinct; Integrated Command Suite; Jacobsen; Kautex; Kiowa Warrior; Klauke; LF; Lycoming; M1117 ASV; McCauley; Mechtronix; Millenworks; Mustang; Next Generation Fuel System; NGFS; Odyssey; On a Mission; OPINICUS; Overwatch; PDCue; Power Advantage; Pro-Fit; ProParts; Ransomes; REALCue; REALFeel; Recoil; Relentless; Rothenberger LLC; RT2; RXV; Sensor Fuzed Weapon; ServiceDirect; Shadow; Shadow Knight; Shadow Master; SkyBOOKS; Skycatcher; Skyhawk; Skyhawk SP; Skylane; SkyPLUS; Sovereign; Speed Punch; Spider; Stationair; ST 4X4; Super Cargomaster; Super Medium; SuperCobra; SYMTX; TDCue; Textron; Textron Defense Systems; Textron Financial Corporation; Textron Marine & Land Systems; Textron Systems; TRUESET; Turbo Skylane; Turbo Stationair; UH-1Y; VALOR; V-22 Osprey; V-280; 2FIVE; 206; 407; 407GT; 407GX; 412, 429, 525 and 525 Relentless. These marks and their related trademark designs and logotypes (and variations of the foregoing) are trademarks, trade names or service marks of Textron Inc., its subsidiaries, affiliates or joint ventures.

Environmental Considerations

Our operations are subject to numerous laws and regulations designed to protect the environment. Compliance with these laws and expenditures for environmental control facilities has not had a material effect on our capital expenditures, earnings or competitive position. Additional information regarding environmental matters is contained in Note 13 to the Consolidated Financial Statements on page 74 of this Annual Report on Form 10-K.

We do not believe that existing or pending climate change legislation, regulation, or international treaties or accords are reasonably likely to have a material effect in the foreseeable future on our business or markets nor on our results of operations, capital expenditures or financial position. We will continue to monitor emerging developments in this area.

Employees

At December 28, 2013, we had approximately 32,000 employees.

Executive Officers of the Registrant

The following table sets forth certain information concerning our executive officers as of February 14, 2014.

Mr. Donnelly joined Textron in June 2008 as Executive Vice President and Chief Operating Officer and was promoted to President and Chief Operating Officer in January 2009. He was appointed to the Board of Directors in October 2009 and became Chief Executive Officer of Textron in December 2009, at which time the Chief Operating Officer position was eliminated. In July 2010, Mr. Donnelly was appointed Chairman of the Board of Directors effective September 1, 2010. Previously, Mr. Donnelly was the President and CEO of General Electric Company’s Aviation business unit, a position he had held since July 2005. GE’s Aviation business unit is a $16 billion maker of commercial and military jet engines and components, as well as integrated digital, electric power and mechanical systems for aircraft. Prior to July 2005, Mr. Donnelly served as Senior Vice President of GE Global Research, one of the world’s largest and most diversified industrial research organizations with facilities in the U.S., India, China and Germany and held various other management positions since joining General Electric in 1989.

Mr. Connor joined Textron in August 2009 as Executive Vice President and Chief Financial Officer. Previously, Mr. Connor was head of Telecom Investment Banking at Goldman, Sachs & Co from 2003 to 2008. Prior to that position, he served as Chief Operating Officer of Telecom, Technology and Media Investment Banking at Goldman, Sachs from 1998 to 2003. Mr. Connor joined the Corporate Finance Department of Goldman, Sachs in 1986 and became a Vice President in 1990 and a Managing Director in 1996.

Ms. Johnson was named Executive Vice President, Human Resources in July 2012. Ms. Johnson joined Textron in 1996 and has held various human resources leadership positions across Textron’s businesses, including Senior Human Resources Business Partner for Greenlee and Vice President of Human Resources for E-Z-GO, a position she held from 2006 until joining Bell in 2009. At Bell, she most recently served as Director of Talent and Organizational Development. Prior to Textron, Ms. Johnson held roles in human resources, marketing and sales, and finance disciplines at several organizations, including IBM and Hamilton Sundstrand, a United Technologies Company.

Mr. Lupone joined Textron in February 2012 as Executive Vice President, General Counsel, Secretary and Chief Compliance Officer. Previously, he was senior vice president and general counsel of Siemens Corporation (U.S.) since 1999 and general counsel of Siemens AG for the Americas since 2008. Prior to joining Siemens in 1992, Mr. Lupone was vice president and general counsel of Price Communications Corporation.

Available Information

We make available free of charge on our Internet Web site (www.textron.com) our Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 as soon as reasonably practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission.

Forward-Looking Information

Certain statements in this Annual Report on Form 10-K and other oral and written statements made by us from time to time are “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements, which may describe strategies, goals, outlook or other non-historical matters, or project revenues, income, returns or other financial measures, often include words such as “believe,” “expect,” “anticipate,” “intend,” “plan,” “estimate,” “guidance,” “project,” “target,” “potential,” “will,” “should,” “could,” “likely” or “may” and similar expressions intended to identify forward-looking statements. These statements are only predictions and involve known and unknown risks, uncertainties, and other factors that may cause our actual results to differ materially from those expressed or implied by such forward-looking statements. Given these uncertainties, you should not place undue reliance on these forward-looking statements. Forward-looking statements speak only as of the date on which they are made, and we undertake no obligation to update or revise any forward-looking statements. In addition to those factors described herein under “RISK FACTORS,” among the factors that could cause actual results to differ materially from past and projected future results are the following:

· Interruptions in the U.S. Government’s ability to fund its activities and/or pay its obligations;

· Changing priorities or reductions in the U.S. Government defense budget, including those related to military operations in foreign countries;

· Our ability to perform as anticipated and to control costs under contracts with the U.S. Government;

· The U.S. Government’s ability to unilaterally modify or terminate its contracts with us for the U.S. Government’s convenience or for our failure to perform, to change applicable procurement and accounting policies, or, under certain circumstances, to withhold payment or suspend or debar us as a contractor eligible to receive future contract awards;

· Changes in foreign military funding priorities or budget constraints and determinations, or changes in government regulations or policies on the export and import of military and commercial products;

· Volatility in the global economy or changes in worldwide political conditions that adversely impact demand for our products;

· Volatility in interest rates or foreign exchange rates;

· Risks related to our international business, including establishing and maintaining facilities in locations around the world and relying on joint venture partners, subcontractors, suppliers, representatives, consultants and other business partners in connection with international business, including in emerging market countries;

· Our Finance segment’s ability to maintain portfolio credit quality or to realize full value of receivables;

· Performance issues with key suppliers or subcontractors;

· Legislative or regulatory actions, both domestic and foreign, impacting our operations or demand for our products;

· Our ability to control costs and successfully implement various cost-reduction activities;

· The efficacy of research and development investments to develop new products or unanticipated expenses in connection with the launching of significant new products or programs;

· The timing of our new product launches or certifications of our new aircraft products;

· Our ability to keep pace with our competitors in the introduction of new products and upgrades with features and technologies desired by our customers;

· Increases in pension expense or employee and retiree medical benefits;

· Continued demand softness or volatility in the markets in which we do business;

· The inability to complete announced acquisitions;

· Difficulty or unanticipated expenses in connection with integrating acquired businesses; and

· The risk that anticipated synergies and opportunities as a result of acquisitions will not be realized or the risk that acquisitions do not perform as planned, including, for example, the risk that acquired businesses will not achieve revenue projections.

Our business, financial condition and results of operations are subject to various risks, including those discussed below, which may affect the value of our securities. The risks discussed below are those that we believe currently are the most significant to our business.

We have customer concentration with the U.S. Government; reduction in U.S. Government defense spending may adversely affect our results of operations and financial condition.

During 2013, we derived approximately 30% of our revenues from sales to a variety of U.S. Government entities. Our revenues from the U.S. Government largely result from contracts awarded to us under various U.S. Government defense-related programs. The funding of these programs is subject to congressional appropriation decisions. Although multiple-year contracts may be planned in connection with major procurements, Congress generally appropriates funds on a fiscal year basis even though a program may continue for several years. Consequently, programs often are only partially funded initially, and additional funds are committed only as Congress makes further appropriations. If we incur costs in excess of funds committed on a contract, we are at risk for non-reimbursement of those costs until additional funds are appropriated. The reduction, termination or delay in the timing of funding for U.S. Government programs for which we currently provide or propose to provide products or services may result in a loss of anticipated future revenues that could materially and adversely impact our results of operations and financial condition. Significant changes in national and international priorities for defense spending could impact the funding, or the timing of funding, of our programs, which could negatively impact our results of operations and financial condition.

Under the Budget Control Act of 2011, the U.S. Government committed to significantly reduce the federal deficit over ten years. Notwithstanding the Bipartisan Budget Control Act of 2013, substantial spending cuts to the U.S. defense budget are likely in the future. In addition, Congress and the Administration continue to debate the nation’s debt ceiling and other fiscal issues. The outcome of that debate could have a significant impact on future defense spending plans. As a result, long-term funding for various programs in which we participate, as well as future purchasing decisions by our U.S. Government customers, could be reduced, delayed or cancelled. In addition, these cuts could adversely affect the viability of the suppliers and subcontractors under our programs.

There are many variables in how these budget cuts could be implemented that make it difficult to determine specific impacts; however, we expect that sequestration, as currently provided for under the Budget Control Act, would result in lower revenues, profits and cash flows for our company. Such circumstances may also result in an impairment of our goodwill and intangible assets. Because our Government contracts generally require us to continue to perform even if the U.S. Government is unable to make timely payments; if the debt ceiling is not raised, and, as a result, the U.S. Government does not pay us on a timely basis, we would need to finance our continued performance of the impacted contracts from our available cash resources, credit facilities and/or access to the capital markets, if available. An extended delay in the timely payment by the U.S. Government could result in a material adverse effect on our cash flows, results of operations and financial condition.

U.S. Government contracts may be terminated at any time and may contain other unfavorable provisions.

The U.S. Government typically can terminate or modify any of its contracts with us either for its convenience or if we default by failing to perform under the terms of the applicable contract. In the event of termination for the U.S. Government’s convenience, contractors are generally protected by provisions covering reimbursement for costs incurred on the contracts and profit on those costs but not the anticipated profit that would have been earned had the contract been completed. A termination arising out of our default for failure to perform could expose us to liability, including but not limited to, liability for re-procurement costs in excess of the total original contract amount, net of the value of work performed and accepted by the customer under the contract. Such an event could also have an adverse effect on our ability to compete for future contracts and orders. If any of our contracts are terminated by the U.S. Government whether for convenience or default, our backlog and anticipated revenues would be reduced by the expected value of the remaining work under such contracts. We also enter into “fee for service” contracts with the U.S.

Government where we retain ownership of, and consequently the risk of loss on, aircraft and equipment supplied to perform under these contracts. Termination of these contracts for convenience or default could materially and adversely impact our results of operations. On contracts for which we are teamed with others and are not the prime contractor, the U.S. Government could terminate a prime contract under which we are a subcontractor, irrespective of the quality of our products and services as a subcontractor. In addition, in the event that the U.S. Government is unable to make timely payments, failure to continue contract performance places the contractor at risk of termination for default. Any such event could result in a material adverse effect on our cash flows, results of operations and financial condition.

As a U.S. Government contractor, we are subject to procurement rules and regulations as well as changes in the Department of Defense (DoD) acquisition practices.

We must comply with and are affected by laws and regulations relating to the formation, administration and performance of U.S. Government contracts. These laws and regulations, among other things, require certification and disclosure of all cost and pricing data in connection with contract negotiation, define allowable and unallowable costs and otherwise govern our right to reimbursement under certain cost-based U.S. Government contracts, and restrict the use and dissemination of classified information and the exportation of certain products and technical data. Our U.S. Government contracts contain provisions that allow the U.S. Government to unilaterally suspend or debar us from receiving new contracts for a period of time, reduce the value of existing contracts, issue modifications to a contract, and control and potentially prohibit the export of our products, services and associated materials. A number of our U.S. Government contracts contain provisions that require us to make disclosure to the Inspector General of the agency that is our customer if we have credible evidence that we have violated U.S. criminal laws involving fraud, conflict of interest, or bribery; the U.S. civil False Claims Act; or received a significant overpayment under a U.S. Government contract. Failure to properly and timely make disclosures under these provisions may result in a termination for default or cause, suspension and/or debarment, and potential fines.

In addition, the DoD’s “Better Buying Power Initiative,” which provides guidance for its acquisition workforce to obtain greater efficiency and productivity in defense spending, significantly affects the contracting environment in which we do business with our DoD customers and could have a significant impact on current programs, as well as new business opportunities. Changes to the DoD acquisition system and contracting models could affect whether and, if so, how we pursue certain opportunities and the terms under which we are able to do so.

As a U.S. Government contractor, our businesses and systems are subject to audit and review by the Defense Contract Audit Agency (DCAA) and the Defense Contract Management Agency (DCMA).

We operate in a highly regulated environment and are routinely audited and reviewed by the U.S. Government and its agencies such as DCAA and DCMA. These agencies review our performance under contracts, our cost structure and our compliance with laws and regulations applicable to U.S. Government contractors. The systems that are subject to review include, but are not limited to, our accounting, estimating, material management and accounting, earned value management, purchasing and government property systems. If an audit uncovers improper or illegal activities we may be subject to civil and criminal penalties and administrative sanctions that may include the termination of our contracts, forfeiture of profits, suspension of payments, fines, and, under certain circumstances, suspension or debarment from future contracts for a period of time. Whether or not illegal activities are alleged, the U.S. Government also has the ability to decrease or withhold certain payments when it deems systems subject to its review to be inadequate. These laws and regulations affect how we conduct business with our customers and, in some instances, impose added costs on our business.

Cost overruns on U.S. Government contracts could subject us to losses or adversely affect our future business.

Under fixed-price contracts, as a general rule, we receive a fixed price irrespective of the actual costs we incur, and, consequently, any costs in excess of the fixed price are absorbed by us. Changes in underlying assumptions, circumstances or estimates used in developing the pricing for such contracts may adversely affect our results of operations. Under time and materials contracts, we are paid for labor at negotiated hourly billing rates and for certain expenses. Under cost-reimbursement contracts that are subject to a contract-ceiling amount, we are reimbursed for allowable costs and paid a fee, which may be fixed or performance based, however, if our costs exceed the contract ceiling or are not allowable under the provisions of the contract or applicable regulations, we may not be able to obtain reimbursement for all such costs. Under each type of contract, if we are unable to control costs incurred in performing under the contract, our cash flows, results of operations and financial condition could be adversely affected. Cost overruns also may adversely affect our ability to sustain existing programs and obtain future contract awards.

Weak demand for our aircraft products may continue to adversely affect our financial results.

Continued worldwide economic softness has adversely impacted the business jet market in recent years. As a result, we have experienced continued weak demand for our fixed-wing aircraft, particularly our business jets. Soft demand for our jets could persist and could continue to adversely impact the pricing of new jets and the valuation of pre-owned jets, which comprise a significant portion of our inventory. A prolonged weakness in the markets for our aircraft products could adversely impact our results of operations and our future prospects.

We may make acquisitions that increase the risks of our business.

We may enter into acquisitions in an effort to expand our business and enhance shareholder value. Acquisitions involve risks and uncertainties that could result in our not achieving expected benefits. Such risks include difficulties in integrating newly acquired businesses and operations in an efficient and cost-effective manner; challenges in achieving expected strategic objectives, cost savings and other benefits; the risk that the acquired businesses’ markets do not evolve as anticipated and that the acquired businesses’ products and technologies do not prove to be those needed to be successful in those markets; the risk that our due diligence reviews of the acquired business do not identify or adequately assess all of the material issues which impact valuation of the business or that may result in costs or liabilities in excess of what we anticipated; the risk that we pay a purchase price that exceeds what the future results of operations would have merited; the risk that the acquired business may have significant internal control deficiencies or exposure to regulatory sanctions; and the potential loss of key customers, suppliers and employees of the acquired businesses. In addition, unanticipated delays or difficulties in effecting acquisitions may prevent the consummation of the acquisition or divert the attention of our management and resources from our existing operations.

On December 26, 2013 we entered into an agreement and plan of merger pursuant to which we will acquire all outstanding equity interests in Beech Holdings, LLC (“Beech”), the parent of Beechcraft Corporation, for approximately $1.4 billion in cash. Each of the foregoing risks may impact the success of the Beech acquisition. We plan to finance the purchase of the equity in Beech and the repayment of Beech’s outstanding debt, which is required at closing, through a combination of available cash at Beech and Textron and up to $1.1 billion in new debt. While we believe that these sources of funds will be sufficient to complete the transaction, it is possible that unanticipated cash requirements, for working capital or other business needs, either at Beech or at Textron, could cause us to incur borrowings in excess of what we currently anticipate.

Difficult economic conditions could continue to affect the performance of our Finance segment and our losses may increase if we are unable to successfully collect our finance receivables or realize sufficient value from collateral.

The financial performance of our Finance segment depends on the quality of loans, leases and other assets in its finance asset portfolios. Portfolio quality may be adversely affected by several factors, including finance receivable underwriting procedures, collateral value, geographic or industry concentrations, and the effect of general economic conditions on our customers’ businesses. Valuations of the types of collateral securing our finance asset portfolio, particularly valuations of pre-owned aircraft, have decreased over recent years and may continue to decrease if weak economic conditions continue. Declining collateral values could result in greater delinquencies, credit losses and foreclosures if customers elect to discontinue payments on loan balances that exceed asset values. Bankruptcy proceedings involving our borrowers may prevent or delay our ability to exercise our rights and remedies and realize the full value of our collateral.

We may need to obtain financing in the future; such financing may not be available to us on satisfactory terms, if at all.

We may periodically need to obtain financing in order to meet our debt obligations as they come due, to support our operations and/or to make acquisitions. Although we currently have access to the capital markets, our access and the cost of borrowings are affected by a number of factors including market conditions and the strength of our credit ratings. If we cannot obtain adequate sources of credit on favorable terms, or at all, our business, operating results, and financial condition could be adversely affected.

Failure to perform by our subcontractors or suppliers could adversely affect our performance.

We rely on other companies to provide raw materials, major components and subsystems for our products. Subcontractors also perform services that we provide to our customers in certain circumstances. We depend on these suppliers and subcontractors to meet our contractual obligations to our customers and conduct our operations. Our ability to meet our obligations to our customers may be adversely affected if suppliers or subcontractors do not provide the agreed-upon supplies or perform the agreed-upon services in compliance with customer requirements and in a timely and cost-effective manner. Likewise, the quality of our products may be adversely impacted if companies to whom we delegate manufacture of major components or subsystems for our products, or from whom we acquire such items, do not provide components or subsystems which meet required specifications and perform to our and our customers’ expectations. Our suppliers may be less likely than us to be able to quickly recover from natural disasters and other events beyond their control and may be subject to additional risks such as financial problems that limit their ability to conduct their operations. The risk of these adverse effects may be greater in circumstances where we rely on only one or two subcontractors or suppliers for a particular raw material, product or service. In particular, in the aircraft industry, most vendor parts are certified by the regulatory agencies as part of the overall Type Certificate for the aircraft being produced by the manufacturer. If a vendor does not or cannot supply its parts, then the manufacturer’s production line may be stopped until the manufacturer can design, manufacture and certify a similar part itself or identify and certify another similar vendor’s part, resulting in significant delays in the completion of aircraft. Such events may adversely affect our financial results, damage our reputation and relationships with our customers, and result in regulatory actions and/or litigation.

Our business could be negatively impacted by information technology disruptions and security threats.

Our information technology (IT) and related systems are critical to the smooth operation of our business and essential to our ability to perform day to day operations. From time to time we update and/or replace IT systems used by our businesses. The implementation of new systems can present temporary disruptions of business activities as existing processes are transitioned to the new systems, resulting in productivity issues, delays in production, shipments or other business operations. In addition, we outsource certain support functions, including certain global IT infrastructure services, to third-party service providers. Any disruption of such outsourced processes or functions also could have a material adverse impact on our operations. In addition, as a U.S. defense contractor, we face certain security threats, including threats to our IT infrastructure, unlawful attempts to gain access to our proprietary or classified information and threats to the physical security of our facilities and employees, as do our customers, suppliers, subcontractors and joint venture partners. Cybersecurity threats, such as malicious software, attempts to gain unauthorized access to information, and other security breaches, are persistent, continue to evolve and require highly skilled IT resources. While we have experienced cyber attacks, we have not suffered any material losses relating to such attacks, and we believe our threat detection and mitigation processes and procedures are robust. Due to the evolving nature of these security threats, the possibility of any future material incidents cannot be completely mitigated. An IT system failure, issues related to implementation of new IT systems or breach of data security could disrupt our operations, cause the loss of business information or compromise confidential information. Such an incident also could require significant management attention and resources and increased costs, and could adversely affect our competitiveness and our results of operations.

Developing new products and technologies entails significant risks and uncertainties.

To continue to grow our revenues and segment profit, we must successfully develop new products and technologies or modify our existing products and technologies for our current and future markets. Our future performance depends, in part, on our ability to identify emerging technological trends and customer requirements and to develop and maintain competitive products and services. Delays or cost overruns in the development and acceptance of new products, or certification of new aircraft and other products, could affect our results of operations. These delays could be caused by unanticipated technological hurdles, production changes to meet customer demands, unanticipated difficulties in obtaining required regulatory certifications of new aircraft or other products, coordination with joint venture partners or failure on the part of our suppliers to deliver components as agreed. Changes in environmental laws and regulations, for example, those enacted in response to climate change concerns and other actions known as “green initiatives,” could lead to the necessity for new or additional investment in product designs or manufacturing processes and could increase environmental compliance expenditures, including costs to defend regulatory reviews. We also could be adversely affected if our research and development investments are less successful than expected or if we do not adequately protect the intellectual property developed through these efforts. Likewise, new products and technologies could generate unanticipated safety or other concerns resulting in expanded product liability risks, potential product recalls and other regulatory issues that could have an adverse impact on us. Furthermore, because of the lengthy research and development cycle involved in bringing certain of our products to market, we cannot predict the economic conditions that will exist when any new product is complete. A reduction in capital spending in the aerospace or defense industries could have a significant effect on the demand for new products and technologies under development, which could have an adverse effect on our financial condition and results of operations. In addition, the market for our product offerings may not develop or continue to expand as we currently anticipate. Furthermore, we cannot be sure that our competitors will not develop competing technologies which gain market acceptance in advance of our products. A significant failure in our new product development efforts or the failure of our products or services to achieve market acceptance more rapidly than our competitors could have an adverse effect on our financial condition and results of operations.

We are subject to the risks of doing business in foreign countries.

Conducting business internationally, including U.S. exports, exposes us to different and additional risks than if we conducted our business solely within the U.S. Our exposure to such risks increases as our international business continues to grow. Our international business is subject to U.S. and local government regulations and procurement policies and practices, which may change from time to time, including regulations relating to import-export control; technology transfer; environmental, health and safety; investments; exchange controls; and repatriation of earnings or cash settlement challenges, as well as to varying currency, geopolitical and economic risks. These international risks may be especially significant with respect to aerospace and defense products for which we sometimes initially must obtain licenses and authorizations from various U.S. Government agencies before we are permitted to sell our products outside the U.S. Any significant impairment of our ability to sell products outside the U.S. could negatively impact our results of operations. Additionally, some international government customers require contractors to agree to specific in-country purchases, manufacturing agreements or financial support arrangements, known as offsets, as a condition for a contract award. The contracts generally extend over several years and may include penalties if we fail to meet the offset requirements, which could adversely impact our results of operations. Additionally, we are facing increasing competition in our international markets from foreign and multinational firms that may have certain home country advantages over us; as a result, our ability to compete successfully in those markets may be adversely affected, which could negatively impact our revenues and profitability.

We maintain manufacturing facilities, service centers, supply centers and other facilities worldwide, including in various emerging market countries. We also have entered into, and expect to continue to enter into, joint venture arrangements in emerging market countries, some of which may require capital investment, guaranties or other commitments. We expect that our investment in emerging market countries will continue to increase. Emerging market operations can present many risks in addition to those discussed above, including civil disturbances, economic and government instability, terrorism and related safety concerns, cultural differences in employment and business practices, difficulties in protecting intellectual property, and the imposition of exchange controls. The impact of any one or more of these or other factors could adversely affect our business, financial condition or operating results.

We also are exposed to risks associated with using foreign representatives and consultants for international sales and operations and teaming with international subcontractors and suppliers in connection with international programs. In many foreign countries, particularly in those with developing economies, it is common to engage in business practices that are prohibited by laws and regulations applicable to us, such as the Foreign Corrupt Practices Act. Although we maintain policies and procedures designed to facilitate compliance with these laws, a violation of such laws by any of our international representatives, consultants, joint ventures, business partners, subcontractors or suppliers, even if prohibited by our policies, could have an adverse effect on our business and reputation.

We are subject to increasing compliance risks that could adversely affect our operating results.

As a global business, we are subject to laws and regulations in the U.S. and other countries in which we operate. Our increased focus on international sales and global operations requires importing and exporting goods and technology, some of which have military applications subjecting them to more stringent import-export controls across international borders on a regular basis. Both U.S. and foreign laws and regulations applicable to us have been increasing in scope and complexity. For example, both U.S. and foreign governments and government agencies regulate the aviation industry, and they may impose new regulations with additional aircraft security or other requirements or restrictions, including, for example, restrictions and/or fees related to carbon emissions levels. New or changing laws and regulations or related interpretation and policies could increase our costs of doing business, affect how we conduct our operations, adversely impact demand for our products, and/or limit our ability to sell our products and services. Compliance with laws and regulations of increasing scope and complexity is even more challenging in our current business environment in which reducing our operating costs is often necessary to remain competitive. In addition, a violation of U.S. and/or foreign laws by one of our employees or business partners could subject us or our employees to civil or criminal penalties, including material monetary fines, or other adverse actions, including denial of import or export privileges and debarment as a government contractor. These improper actions could damage our reputation and have an adverse effect on our business.

We are subject to legal proceedings and other claims.

We are subject to legal proceedings and other claims arising out of the conduct of our business, including proceedings and claims relating to commercial and financial transactions; government contracts; alleged lack of compliance with applicable laws and regulations; production partners; product liability; patent and trademark infringement; employment disputes; and environmental, safety and health matters. Due to the nature of our manufacturing business, we may be subject to liability claims arising from accidents involving our products, including claims for serious personal injuries or death caused by weather or by pilot, driver or user error. In the case of litigation matters for which reserves have not been established because the loss is not deemed probable, it is reasonably possible that such claims could be decided against us and could require us to pay damages or make other expenditures in amounts that are not presently estimable. In addition, we cannot be certain that our reserves are adequate and that our insurance coverage will be sufficient to cover one or more substantial claims. Furthermore, we may not be able to obtain insurance coverage at acceptable levels and costs in the future. Litigation is inherently unpredictable, and we could incur judgments, receive adverse arbitration awards or enter into settlements for current or future claims that could adversely affect our financial position or our results of operations in any particular period.

Intellectual property infringement claims of others and the inability to protect our intellectual property rights could harm our business and our customers.

Intellectual property infringement claims may be asserted by third parties against us or our customers. Any related indemnification payments or legal costs we may be obliged to pay on behalf of our businesses, our customers or other third parties could be costly. In addition, we own the rights to many patents, trademarks, brand names, trade names and trade secrets that are important to our business. The inability to enforce these intellectual property rights may have an adverse effect on our results of operations. Additionally, our intellectual property could be at risk due to various cyber threats.

Certain of our products are subject to laws regulating consumer products and could be subject to repurchase or recall as a result of safety issues.

As a distributor of consumer products in the U.S., certain of our products also are subject to the Consumer Product Safety Act, which empowers the U.S. Consumer Product Safety Commission (CPSC) to exclude from the market products that are found to be

unsafe or hazardous. Under certain circumstances, the CPSC could require us to repair, replace or refund the purchase price of one or more of our products, or potentially even discontinue entire product lines, or we may voluntarily do so, but within strictures recommended by the CPSC. The CPSC also can impose fines or penalties on a manufacturer for non-compliance with its requirements. Furthermore, failure to timely notify the CPSC of a potential safety hazard can result in significant fines being assessed against us. Any repurchases or recalls of our products or an imposition of fines or penalties could be costly to us and could damage the reputation or the value of our brands. Additionally, laws regulating certain consumer products exist in some states, as well as in other countries in which we sell our products, and more restrictive laws and regulations may be adopted in the future.

The increasing costs of certain employee and retiree benefits could adversely affect our results.

Our earnings and cash flow may be adversely impacted by the amount of income or expense we expend or record for employee benefit plans. This is particularly true for our defined benefit pension plans, where required contributions to those plans and related expenses are driven by, among other things, our assumptions of the expected long-term rate of return on plan assets, the discount rate used for future payment obligations and the rates of future cost growth. Additionally, as part of our annual evaluation of these plans, significant changes in our assumptions, due to changes in economic, legislative and/or demographic experience or circumstances, or changes in our actual investment returns could negatively impact the funded status of our plans requiring us to substantially increase our pension liability with a resulting decrease in shareholders’ equity. Also, changes in pension legislation and regulations could increase the cost associated with our defined benefit pension plans.

In addition, medical costs are rising at a rate faster than the general inflation rate. Continued medical cost inflation in excess of the general inflation rate would increase the risk that we will not be able to mitigate the rising costs of medical benefits. Moreover, we expect that some of the requirements of the new comprehensive healthcare law will increase our future costs. Increases to the costs of pension and medical benefits could have an adverse effect on our results of operations.

Our business could be adversely affected by strikes or work stoppages and other labor issues.

Approximately 6,000 of our U.S. employees, or 26% of our total U.S. employees, are unionized, and approximately 2,900 of our non-U.S. employees, or 32% of our total non-U.S. employees, are represented by organized councils. As a result, we may experience work stoppages, which could negatively impact our ability to manufacture our products on a timely basis, resulting in strain on our relationships with our customers and a loss of revenues. The presence of unions also may limit our flexibility in responding to competitive pressures in the marketplace. In addition, the workforces of many of our suppliers and customers are represented by labor unions. Work stoppages or strikes at the plants of our key suppliers could disrupt our manufacturing processes; similar actions at the plants of our customers could result in delayed or canceled orders for our products. Any of these events could adversely affect our results of operations.

Currency, raw material price and interest rate fluctuations may adversely affect our results.

We are exposed to a variety of market risks, including the effects of changes in foreign currency exchange rates, raw material prices and interest rates. Currency variations also contribute to variations in sales of products and services in impacted jurisdictions. Accordingly, fluctuations in foreign currency rates could adversely affect our profitability in future periods. We monitor and manage these exposures as an integral part of our overall risk management program. In some cases, we purchase derivatives or enter into contracts to insulate our results of operations from these fluctuations. Nevertheless, changes in currency exchange rates, raw material prices and interest rates can have substantial adverse effects on our results of operations.

We may be unable to effectively mitigate pricing pressures.

In some markets, particularly where we deliver component products and services to original equipment manufacturers, we face ongoing customer demands for price reductions, which sometimes are contractually obligated. However, if we are unable to effectively mitigate future pricing pressures through technological advances or by lowering our cost base through improved operating and supply chain efficiencies, our results of operations could be adversely affected.

Unanticipated changes in our tax rates or exposure to additional income tax liabilities could affect our profitability.

We are subject to income taxes in both the U.S. and various non-U.S. jurisdictions, and our domestic and international tax liabilities are subject to the allocation of income among these different jurisdictions. Our effective tax rate could be adversely affected by changes in the mix of earnings in countries with differing statutory tax rates, changes in the valuation of deferred tax assets and liabilities, changes to unrecognized tax benefits or changes in tax laws, which could affect our profitability. In particular, the carrying value of deferred tax assets is dependent on our ability to generate future taxable income, as well as changes to applicable statutory tax rates. In addition, the amount of income taxes we pay is subject to audits in various jurisdictions, and a material assessment by a tax authority could affect our profitability.

None.

On December 28, 2013, we operated a total of 52 plants located throughout the U.S. and 52 plants outside the U.S. We own 53 plants and lease the remainder for a total manufacturing space of approximately 21.1 million square feet. We consider the productive capacity of the plants operated by each of our business segments to be adequate. We also own or lease offices, warehouses, service centers and other space at various locations. In general, our facilities are in good condition, are considered to be adequate for the uses to which they are being put and are substantially in regular use.

As previously reported in Textron’s Annual Report on Form 10-K for the fiscal year ended January 2, 2010, on August 21, 2009, a purported class action lawsuit was filed in the United States District Court in Rhode Island by Dianne Leach, an alleged participant in the Textron Savings Plan. Plaintiffs alleged that the company and certain of its present and former employees, officers and directors had violated the United States Employee Retirement Income Security Act (ERISA) by imprudently permitting participants in the Textron Savings Plan to invest in Textron common stock. The complaints sought equitable relief and unspecified compensatory damages. As reported in Textron’s Annual Report on Form 10-K for the fiscal year ended December 29, 2012, on December 13, 2012, as a result of a mediation process overseen by an independent mediator, the parties reached an agreement in principle, subject to settlement documentation and court approval, to settle the plaintiffs’ claims for an immaterial amount. On August 21, 2013, the Court entered an order preliminarily approving the settlement, certifying a settlement class, and approving the form and manner of class notice. On February 10, 2014, the Court entered an order giving final approval of the settlement and final judgment in the case. Neither Textron nor any of the other defendants in the settlement admitted any wrongdoing with respect to the allegations in the case.

We also are subject to other actual and threatened legal proceedings and other claims arising out of the conduct of our business, including proceedings and claims relating to commercial and financial transactions; government contracts; alleged lack of compliance with applicable laws and regulations; production partners; product liability; patent and trademark infringement; employment disputes; and environmental, health and safety matters. Some of these legal proceedings and claims seek damages, fines or penalties in substantial amounts or remediation of environmental contamination. As a government contractor, we are subject to audits, reviews and investigations to determine whether our operations are being conducted in accordance with applicable regulatory requirements. Under federal government procurement regulations, certain claims brought by the U.S. Government could result in our suspension or debarment from U.S. Government contracting for a period of time. On the basis of information presently available, we do not believe that existing proceedings and claims will have a material effect on our financial position or results of operations.

Not applicable.

PART II

The principal market on which our common stock is traded is the New York Stock Exchange under the symbol “TXT.” At December 28, 2013, there were approximately 11,500 record holders of Textron common stock. The high and low sales prices per share of our common stock as reported on the New York Stock Exchange and the dividends paid per share are provided in the following table:

Issuer Repurchases of Equity Securities

On January 23, 2013, the company announced the adoption of a new plan authorizing the repurchase of up to 25 million shares of Textron common stock. This plan has no expiration date. There were no shares purchased under the plan during 2013.

On February 5, 2014, we entered into an accelerated share repurchase agreement (ASR) with a counterparty to repurchase an aggregate of 4.3 million shares of our outstanding common stock from the counterparty for $150 million. The ASR is scheduled to expire in December 2014. Upon final settlement of the ASR, we may receive additional shares or pay additional cash or shares, at our option, based on the daily volume weighted average market price of our common stock over the course of a calculation period, less a discount.

Stock Performance Graph

The following graph compares the total return on a cumulative basis at the end of each year of $100 invested in our common stock on December 31, 2008 with the Standard & Poor’s (S&P) 500 Stock Index, the S&P 500 Aerospace & Defense (A&D) Index and the S&P Industrial Conglomerates (IC) Index. We are included in both the S&P 500 and the S&P IC indices. The values calculated assume dividend reinvestment.

(a) For 2011, segment profit included a $186 million initial mark-to-market adjustment for finance receivables in the Golf Mortgage portfolio that were transferred to the held for sale classification.

(b) Special charges include restructuring charges of $99 million and $237 million in 2010 and 2009, respectively, primarily related to severance and asset impairment charges. In 2010, special charges also include a $91 million non-cash pre-tax charge to reclassify a foreign exchange loss from equity to the income statement as a result of substantially liquidating a Finance segment entity. In 2009, special charges include a goodwill impairment charge of $80 million in the Industrial segment.

(c) For 2009, the potential dilutive effect of stock options, restricted stock units and the shares that could have been issued upon the conversion of our convertible notes and upon the exercise of the related warrants was excluded from the computation of diluted weighted-average shares outstanding as the shares would have an anti-dilutive effect on the loss from continuing operations.

Overview and Consolidated Results of Operations

For Textron, 2013 was an important year with significant new product introductions, strategic acquisitions and investments in the future of our businesses. During 2013, we accomplished the following:

· Invested $651 million in research and development costs, a 12% increase over the prior year, demonstrating our commitment to expanding our current product lines across all of our businesses. As a result, we brought new products to market in many of our businesses, including the certification of two new models of Cessna aircraft, the Citation M2 and the Sovereign+ jet.

· Acquired six companies, including two flight simulation and aircraft training product companies for the Textron Systems segment, two companies to augment our Greenlee business in the Industrial segment and two service centers at Cessna for an aggregate cash payment of $196 million.

· Made $204 million in contributions to our pension plans and ended the year with an unfunded pension plan liability of $199 million, compared to $1.3 billion at the end of 2012.

· Reduced our debt-to-capital, net of cash ratio to 15% from 24% in the prior year, in part due to the maturity of our convertible senior notes and the settlement of the related call option and warrants.

An analysis of our consolidated operating results is set forth below. A more detailed analysis of our segments’ operating results is provided in the Segment Analysis section on pages 20 to 28.

Revenues

Revenues decreased $133 million, 1%, in 2013, compared with 2012, as revenue decreases in the Cessna, Finance, and Textron Systems segments were partially offset by higher revenues in the Bell and Industrial segments. The net revenue decrease included the following factors:

· Lower Cessna revenues of $327 million, primarily due to lower Citation jet volume of $384 million and CitationAir volume of $114 million, partially offset by higher aftermarket volume of $65 million and higher pre-owned aircraft volume of $53 million.

· Lower Finance revenues of $83 million, primarily attributable to an unfavorable impact of $46 million from lower average finance receivables and a decrease of $25 million in revenues related to the resolution of a Timeshare account in 2012.

· Lower Textron Systems revenues of $72 million, largely due to lower volume of $51 million in the Marine & Land product line and lower volume of $28 million in the UAS product line.

· Higher Bell revenues of $237 million, largely due to higher volume of $163 million in our military programs, primarily reflecting higher V-22 deliveries and aftermarket volume, and $74 million of higher commercial revenues, largely due to higher aircraft volume.

· Higher Industrial segment revenues of $112 million, primarily due to higher volume of $58 million and the impact of acquisitions of $46 million.

Revenues increased $962 million, 9%, in 2012, compared with 2011, as increases in the Bell, Cessna, Industrial and Finance segments were partially offset by a reduction in the Textron Systems segment. The net revenue increase included the following factors:

· Higher Bell revenues of $749 million, primarily due to higher commercial aircraft volume of $476 million and an increase in V-22 program volume of $231 million, largely due to higher deliveries.

· Higher Cessna revenues of $121 million, primarily due to higher pre-owned aircraft volume of $68 million and Citation jet revenues of $57 million, reflecting a change in mix of jets sold during the period.

· Increased Industrial segment revenues of $115 million, primarily due to higher volume of $171 million, primarily reflecting higher market demand in the Fuel Systems and Functional Components and Golf, Turf Care and Light

Transportation Vehicles product lines, partially offset by an unfavorable foreign exchange impact of $80 million, primarily related to the weakening of the euro.

· Higher Finance revenues of $112 million as described more fully in the Segment Analysis below.

· Lower Textron Systems revenues of $135 million, primarily due to lower volume across all product lines.

Cost of Sales and Selling and Administrative Expense

Manufacturing cost of sales and selling and administrative expenses together comprise our operating expenses. Changes in operating expenses are more fully discussed in our Segment Analysis below.

Cost of sales as a percentage of manufacturing revenues was 84.6% in 2013, and 83.3% in both 2012 and 2011.

Consolidated manufacturing cost of sales increased $112 million, 1%, in 2013, compared with 2012, primarily due to higher sales volume at Bell and the impact from businesses acquired in 2013, partially offset by lower sales at Cessna and Textron Systems. In 2013, gross margin as a percentage of manufacturing revenues decreased 130 basis points primarily due to unfavorable performance at Bell, largely due to manufacturing inefficiencies associated with labor disruptions resulting from negotiations with bargained employees and with the implementation of a new enterprise resource planning system in the first quarter of 2013, as well as lower Citation jet and CitiationAir volume at Cessna.

Selling and administrative expenses decreased $39 million, 3%, in 2013 compared with 2012, largely due to a reduction in administrative expenses of $26 million and lower provision for loan losses of $20 million at the Finance segment, both primarily associated with the non-captive business. Selling and administrative expense was also impacted by $28 million in severance costs incurred in 2013 at Cessna, which were largely offset by a $27 million charge from an unfavorable arbitration award incurred in 2012 at Cessna.

In 2012, consolidated manufacturing cost of sales increased $711 million, 8%, compared with 2011, principally due to higher net sales volume. Cost of sales was reduced by $65 million in 2012 from foreign exchange fluctuations, primarily in the Industrial segment due to the weakening of the euro. In addition, cost of sales included $37 million in charges related to our new UAS fee-for-service contracts at Textron Systems, which were offset by the impact of 2011 charges at Textron Systems of $60 million related to the impairment of intangible assets and severance costs. Selling and administrative expense decreased $30 million, 3%, in 2012, compared with 2011. The decrease was largely driven by lower operating expenses of $56 million at the Finance segment primarily associated with the exit of the non-captive business, partially offset by a $27 million charge at Cessna from an unfavorable arbitration award described more fully in the Segment Analysis below.

Interest Expense

Interest expense on the Consolidated Statement of Op

Showing the first 8K of 82K characters. Open the full section

Foreign Exchange Risks

Our financial results are affected by changes in foreign currency exchange rates in the various countries in which our products are manufactured and/or sold. For our manufacturing operations, we manage exposures to foreign currency assets and earnings primarily by funding certain foreign currency-denominated assets with liabilities in the same currency so that certain exposures are naturally offset. We primarily use borrowings denominated in euro and British pound sterling for these purposes. In managing our foreign currency transaction exposures, we also enter into foreign currency forward exchange and option contracts. These contracts generally are used to fix the local currency cost of purchased goods or services or selling prices denominated in currencies other than the functional currency. The notional amount of outstanding foreign exchange contracts and foreign currency options was approximately $636 million and $664 million at the end of 2013 and 2012, respectively.

The impact of foreign exchange rate changes for 2013 and 2012 from the prior year for each period is provided below:

Interest Rate Risks

Our financial results are affected by changes in interest rates. As part of managing this risk, we seek to achieve a prudent balance between floating- and fixed-rate exposures. We continually monitor our mix of these exposures and adjust the mix, as necessary. For our Finance group, we limit our risk to changes in interest rates with a strategy of matching floating-rate assets with floating-rate liabilities that includes the use of interest rate exchange agreements.

Quantitative Risk Measures

In the normal course of business, we enter into financial instruments for purposes other than trading. To quantify the market risk inherent in our financial instruments, we utilize a sensitivity analysis. The financial instruments that are subject to market risk (interest rate risk and foreign exchange rate risk) include finance receivables (excluding lease receivables), debt (excluding lease obligations), interest rate exchange agreements and foreign currency exchange contracts.

Presented below is a sensitivity analysis of the fair value of financial instruments outstanding at year-end. We estimate the fair value of the financial instruments using discounted cash flow analysis and indicative market pricing as reported by leading financial news and data providers. This sensitivity analysis is most likely not indicative of actual results in the future. The following table illustrates the sensitivity to a hypothetical change in the fair value of the financial instruments assuming a 10% decrease in interest rates and a 10% strengthening in exchange rates against the U.S. dollar:

* The value represents an asset or (liability).

Our Consolidated Financial Statements and the related reports of our independent registered public accounting firm thereon are included in this Annual Report on Form 10-K on the pages indicated below:

All other schedules are omitted either because they are not applicable or not required or because the required information is included in the financial statements or notes thereto.

Report of Management

Management is responsible for the integrity and objectivity of the financial data presented in this Annual Report on Form 10-K. The Consolidated Financial Statements have been prepared in conformity with U.S. generally accepted accounting principles and include amounts based on management’s best estimates and judgments. Management also is responsible for establishing and maintaining adequate internal control over financial reporting for Textron Inc. as such term is defined in Exchange Act Rules 13a-15(f). With the participation of our management, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework). Based on our evaluation under the framework in Internal Control – Integrated Framework, we have concluded that Textron Inc. maintained, in all material respects, effective internal control over financial reporting as of December 28, 2013.

The independent registered public accounting firm, Ernst & Young LLP, has audited the Consolidated Financial Statements of Textron Inc. and has issued an attestation report on Textron’s internal controls over financial reporting as of December 28, 2013, as stated in its reports, which are included herein.

We conduct our business in accordance with the standards outlined in the Textron Business Conduct Guidelines, which are communicated to all employees. Honesty, integrity and high ethical standards are the core values of how we conduct business. Every Textron business prepares and carries out an annual Compliance Plan to ensure these values and standards are maintained. Our internal control structure is designed to provide reasonable assurance, at appropriate cost, that assets are safeguarded and that transactions are properly executed and recorded. The internal control structure includes, among other things, established policies and procedures, an internal audit function, and the selection and training of qualified personnel. Textron’s management is responsible for implementing effective internal control systems and monitoring their effectiveness, as well as developing and executing an annual internal control plan.

The Audit Committee of our Board of Directors, on behalf of the shareholders, oversees management’s financial reporting responsibilities. The Audit Committee consists of six directors who are not officers or employees of Textron and meets regularly with the independent auditors, management and our internal auditors to review matters relating to financial reporting, internal accounting controls and auditing.

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders of Textron Inc.

We have audited Textron Inc.’s internal control over financial reporting as of December 28, 2013, based on criteria established in Internal Control – Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (1992 Framework) (the COSO criteria). Textron Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Report of Management. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the asses

Showing the first 8K of 170K characters. Open the full section

None.

Disclosure Controls and Procedures — We have carried out an evaluation, under the supervision and with the participation of our management, including our Chairman, President and Chief Executive Officer (CEO) and our Executive Vice President and Chief Financial Officer (CFO), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Act”)) as of the end of the fiscal year covered by this report. Based upon that evaluation, our CEO and CFO concluded that our disclosure controls and procedures are effective in providing reasonable assurance that (a) the information required to be disclosed by us in the reports that we file or submit under the Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and (b) such information is accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.

Report of Management — See page 40.

Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting — See page 41.

Changes in Internal Controls — There have been no changes in our internal control over financial reporting during the fourth quarter of the fiscal year covered by this report that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART III

The information appearing under “ELECTION OF DIRECTORS— Nominees for Director,” “—The Board of Directors— Corporate Governance,” “—The Board of Directors— Code of Ethics,” “–Board Committees— Audit Committee,” and “SECTION 16(a) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE” in the Proxy Statement for our Annual Meeting of Shareholders to be held on April 23, 2014 is incorporated by reference into this Annual Report on Form 10-K.

Information regarding our executive officers is contained in Part I of this Annual Report on Form 10-K.

The information appearing under “ELECTION OF DIRECTORS — The Board of Directors-- Compensation of Directors,” “ELECTION OF DIRECTORS — Board Committees-- Compensation Committee Interlocks and Insider Participation,” “COMPENSATION COMMITTEE REPORT,” “COMPENSATION DISCUSSION AND ANALYSIS” and “EXECUTIVE COMPENSATION” in the Proxy Statement for our Annual Meeting of Shareholders to be held on April 23, 2014 is incorporated by reference into this Annual Report on Form 10-K.

The information appearing under “SECURITY OWNERSHIP” and “EXECUTIVE COMPENSATION – Equity Compensation Plan Information” in the Proxy Statement for our Annual Meeting of Shareholders to be held on April 23, 2014 is incorporated by reference into this Annual Report on Form 10-K.

The information appearing under “ELECTION OF DIRECTORS — The Board of Directors--Director Independence” and “EXECUTIVE COMPENSATION — Transactions with Related Persons” in the Proxy Statement for our Annual Meeting of Shareholders to be held on April 23, 2014 is incorporated by reference into this Annual Report on Form 10-K.

The information appearing under “RATIFICATION OF APPOINTMENT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM — Fees to Independent Auditors” in the Proxy Statement for our Annual Meeting of Shareholders to be held on April 23, 2014 is incorporated by reference into this Annual Report on Form 10-K.

PART IV

Financial Statements and Schedules — See Index on Page 39.

• Confidential Treatment has been requested for portions of this document.

Signatures

Pursuant to the requirement of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this Annual Report on Form 10-K to be signed on its behalf by the undersigned, thereunto duly authorized on this 14th day of February 2014.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Annual Report on Form 10-K has been signed below on this 14th day of February 2014 by the following persons on behalf of the registrant and in the capacities indicated: