Deere & Co. 10-K 2025-11-02

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

(Mark one)

☒ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended November 2, 2025

or

☐ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from ____ to ____

Commission File Number 1-4121

DEERE & COMPANY

(Exact name of registrant as specified in its charter)

​	​	​
Delaware	​	36-2382580
(State or other jurisdiction of incorporation or organization)	​	(IRS Employer Identification No.)

​

​	​	​	​	​
One John Deere Place**,** Moline**,** Illinois	​	61265	​	(309) 765-8000
(Address of principal executive offices)	​	(Zip Code)	​	(Registrant’s telephone number, including area code)

​

SECURITIES REGISTERED PURSUANT TO SECTION 12(b) OF THE ACT

​	​	​	​	​
Title of each class	​	Trading Symbols	​	Name of each exchange on which registered
Common stock, $1 par value	​	DE	​	New York Stock Exchange
6.55% Debentures Due 2028	​	DE28	​	New York Stock Exchange

​

SECURITIES REGISTERED PURSUANT TO SECTION 12(g) OF THE ACT: NONE

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☒ No ☐

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐ No ☒

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒ No ☐

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes ☒ No ☐

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

​	​	​	​
​	Large accelerated filer ☒	​	Accelerated filer ☐
​	Non-accelerated filer ☐	​	Smaller reporting company ☐
​	​	​	Emerging growth company ☐

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

Indicate by check mark whether the registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☒

If securities are registered pursuant to Section 12(b) of the Act, indicate by check mark whether the financial statements of the registrant included in the filing reflect the correction of an error to previously issued financial statements. ☐

Indicate by check mark whether any of those error corrections are restatements that required a recovery analysis of incentive-based compensation received by any of the registrant’s executive officers during the relevant recovery period pursuant to §240.10D-1(b). ☐

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ☐ No ☒

The aggregate quoted market price of voting stock of the registrant held by non-affiliates at April 25, 2025, was $124,313,866,554. At November 28, 2025, 270,445,437 shares of common stock, $1 par value, of the registrant were outstanding.

Documents Incorporated by Reference. Portions of the proxy statement for the annual meeting of stockholders to be held on February 25, 2026 are incorporated by reference into Part III of this Form 10-K.

​

​

​

TABLE OF CONTENTS

​	​	​
​	​	Page
PART I	​	​
ITEM 1.	BUSINESS	2
ITEM 1A.	RISK FACTORS	14
ITEM 1B.	UNRESOLVED STAFF COMMENTS	25
ITEM 1C.	CYBERSECURITY	25
ITEM 2.	PROPERTIES	26
ITEM 3.	LEGAL PROCEEDINGS	27
ITEM 4.	MINE SAFETY DISCLOSURES	27
​	​	​
PART II	​	​
ITEM 5.	MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES	27
ITEM 6.	[RESERVED]	29
ITEM 7.	MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS	29
ITEM 7A.	QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK	29
ITEM 8.	FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA	29
ITEM 9.	CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE	29
ITEM 9A.	CONTROLS AND PROCEDURES	29
ITEM 9B.	OTHER INFORMATION	29
ITEM 9C.	DISCLOSURE REGARDING FOREIGN JURISDICTIONS THAT PREVENT INSPECTIONS	29
​	​	​
PART III	​	​
ITEM 10.	DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE	30
ITEM 11.	EXECUTIVE COMPENSATION	30
ITEM 12.	SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS	30
ITEM 13.	CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE	30
ITEM 14.	PRINCIPAL ACCOUNTANT FEES AND SERVICES	30
​	​	​
PART IV	​	​
ITEM 15.	EXHIBITS AND FINANCIAL STATEMENT SCHEDULES	31
ITEM 16.	FORM 10-K SUMMARY	31

​

​

​

​

PART I

This Annual Report on Form 10-K contains forward-looking statements that are subject to risks and uncertainties. All statements other than statements of historical fact included in this Annual Report on Form 10-K are forward-looking statements. Forward-looking statements provide our current expectations and projections relating to our financial condition, results of operations, plans, objectives, future performance, and business. You can identify forward-looking statements as they do not relate to historical or current facts and by words such as “believe,” “expect,” “estimate,” “anticipate,” “will,” “aim,” “should,” “plan,” “forecast,” “target,” “guide,” “project,” “intend,” “could,” and similar words or expressions.

All forward-looking statements are subject to risks and uncertainties that may cause actual results to differ materially from those that we expected. Important factors that could cause actual results to differ materially from our expectations, or cautionary statements, and other important information about forward-looking statements are disclosed under Item 1A, “Risk Factors,” and Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations–Forward-Looking Statements,” in this Annual Report on Form 10-K.

As used herein, the terms “John Deere,” “we,” “us,” “our,” or “the Company” refer collectively to Deere & Company and its subsidiaries, unless designated or identified otherwise. All amounts are presented in millions of U.S. dollars, unless otherwise specified.

Products

John Deere has manufactured agricultural equipment since 1837. Deere & Company was incorporated under the laws of Delaware in 1958. Our business is managed through the following four business segments: Production & Precision Agriculture (PPA), Small Agriculture & Turf (SAT), Construction & Forestry (CF), and Financial Services (John Deere Financial or FS).

​ ​ ​	​		​		​		​
​	​		​		​		​
BUSINESS SEGMENT	​	PRODUCTION & PRECISION AGRICULTURE	​	SMALL AGRICULTURE & TURF	​	CONSTRUCTION & FORESTRY	​	FINANCIAL SERVICES
PRODUCTS	​	● 4WD/track and row crop tractors ● Harvesters ● Cotton Pickers and Cotton Strippers ● Sugarcane Harvesters ● Sugarcane Loaders ● Soil Preparation, Tillage, Seeding, Application, and Crop Care Equipment	​	● Specialty, Utility, and Compact Tractors ● Self-Propelled Forage Harvesters and Attachments ● Hay and Forage Equipment ● Rotary Mowers ● Utility Vehicles ● Riding Lawn Equipment and Commercial Mowing Equipment ● Golf Course Equipment	​	● Backhoe Loaders ● Crawler Dozers and Loaders ● Skid Steers ● Four-Wheel-Drive Loaders ● Compact Wheel Loaders ● Excavators and Compact Excavators ● Equipment used in Timber Harvesting ● Road Building and Road Rehabilitation Equipment ● Articulated Dump Trucks and Motor Graders	​	● Retail Notes ● Revolving Charge Accounts ● Wholesale Receivables ● Leases ● Extended Warranties
​	​	​	​	​	​	​	​	​
​	​	​	​	​	​	​	​	​
	​	​	​	​	​	​	​	​
​	​	​	​	​	​	​	​	​
​	​	​	​	​	​	​	​
​	​		​		​		​	​
CROPS/FUNCTION	​	● Corn and Soy ● Small Grain ● Cotton ● Sugarcane	​	● Dairy and Livestock ● Lawn and Property Maintenance ● Golf Course Maintenance ● High-Value Crops and Small Acreage Crops	​	● Earthmoving ● Forestry ● Roadbuilding	​	● Financial Solutions
	​	​	​	​	​	​	​
​	​	​	​	​	​		​	​
​	​		​		​	​	​	​

Smart Industrial Operating Model and Leap Ambitions

Our Smart Industrial Operating Model aims to deliver greater value for our customers, accelerate our competitive advantage in advanced technologies, build on our fundamental manufacturing strengths and core values, and capitalize on opportunities that lie ahead by leveraging advanced technologies with our operational excellence. To drive these outcomes, we are focused on the following three pillars:

Production Systems. A strategic alignment of products and solutions around our customers’ production systems. Production systems refer to the series of steps our customers take to execute different tasks, operations, and projects to grow an agricultural product or execute a project.

Technology Stack. Investments in technology, as well as research and development, which deliver intelligent solutions to our customers through hardware and devices, embedded software, connectivity, data platforms, and applications. The technology stack leverages these core technologies across the enterprise, including digital capabilities, automation and machine learning, and autonomy. The stack has the potential to unlock economic and sustainable value for customers by optimizing jobs, strengthening decision-making, and better connecting the steps of a production system.

Lifecycle Solutions. The enterprise integration of our aftermarket and support capabilities to more effectively manage customer equipment, service, and technology needs across the full lifetime of a John Deere product, and with a specific lifecycle solution focus on the ownership experience. This integrated support seeks to enhance customer value through proactive and reactive support, easy access to parts, value-add services, and precision upgrades, regardless of when a customer purchases our equipment.

In 2022, we introduced our Leap Ambitions (“Ambitions”), a set of focused goals designed to guide the implementation of our Smart Industrial Operating Model. These Ambitions are built upon a foundation of product quality and manufacturing excellence, supported by a best-in-class dealer channel, and enabled by employees dedicated to solving some of the world’s most important problems. To build on our accomplishments and lay the foundation for sustained growth as we move toward 2030, in December 2025 we refined our Ambitions.

Our refined Ambitions feature long-term financial and operational goals, emphasizing the use of our differentiated equipment and service solutions, including automation, autonomy, digitalization, lifecycle solutions, and Solutions as a Service (SaaS). Utilization of these solutions is currently measured through various performance indicators. Our refined Ambitions and their timelines may be updated from time to time. In addition, we may not be able to achieve these goals for a variety of reasons, some of which may be beyond our control. See Item 1A Risk Factors, “Strategic Risks—We may not realize the anticipated benefits of our Smart Industrial Operating Model and Leap Ambitions.”

Equipment Operations

Our equipment operations consist of three of our business segments: PPA, SAT, and CF. In fiscal year 2025, PPA generated $17,311 net sales, or 45% of equipment operations net sales; SAT generated $10,224 net sales, or 26% of equipment operations net sales; and CF generated $11,382 net sales, or 29% of equipment operations net sales.

Production & Precision Agriculture

The PPA segment is committed to meeting the fundamental needs of our customers through a combination of equipment and technology designed to enable our customers to overcome some of their biggest challenges: doing more with less, labor shortages, volatile input costs, and executing jobs in tighter timeframes. This segment defines, develops, and delivers global equipment and technology solutions for production-scale growers of crops like large grains (such as corn and soy), small grains (such as wheat, oats, and barley), cotton, and sugarcane. Equipment manufactured and distributed by the segment includes four-wheel-drive (4WD)/track and row crop tractors, harvesters, cotton pickers, cotton strippers, sugarcane harvesters, sugarcane loaders, and related harvesting front-end equipment. In addition, the segment includes tillage, seeding, and application equipment, including sprayers and nutrient management, and soil preparation machinery, and related attachments and service parts.

We continue to invest in the development and production of advanced technology through integrated agricultural solutions and precision technologies across our portfolio of equipment. We believe our investments in precision technology will transform our farmers’ equipment into smarter, more efficient machines.

We have developed a production system-level approach that helps us understand how customers operate, focusing on their costs, identifying the opportunities for them to reduce inputs, and to improve productivity, crop yields, and sustainability. Advancements such as precise global navigation satellite systems technology, advanced connectivity and telematics, on-board sensors and computing power, automation software, digital tools, applications, and analytics provide seamless integration of information designed to improve customer decision-making and job execution.

Our advanced telematics systems remotely connect equipment owners, business managers, and dealers to equipment in the field through the John Deere Operations Center ™, our digital management system that allows customers to access farm and jobsite

information through their devices. This connection provides real-time alerts and information about equipment location, utilization, performance, and maintenance to improve productivity and efficiency, as well as to monitor agronomic job execution.

We are beginning to leverage technology from our PPA segment across other business segments. For example, cameras, obstacle detection, radars, and machine learning have been applied to our CF Smart Detect™ tool to identify obstacles on jobsites. In addition, CF roadbuilding customers are now able to access the John Deere Operations Center™, enabling them to view near real-time data and insights to help make informed decisions, streamline maintenance, and track productivity.

In addition to John Deere brand names, the table below provides a list of select PPA products and their associated brand names:

PRODUCT	BRAND NAME
Sprayers	Hagie, Mazzotti
Planters and Cultivators	Monosem
Sprayers and Planters	PLA
Carbon Fiber Sprayer Booms	King Agro
Technology	Harvest Profit, Sentera
Aftermarket and Precision Upgrades	A & I, Unimil by John Deere, Alternatives by John Deere, Frontier, Surepoint

Small Agriculture & Turf

SAT is committed to meeting the needs of our customers through defining, developing, and delivering global equipment and technology solutions for dairy and livestock producers, high-value crop and small acre crop producers, and turf and utility customers. The segment works to provide product leadership while extending integrated agricultural solutions and precision technologies across its portfolio of equipment.

Equipment manufactured and distributed by the segment includes specialty, utility, and compact tractors, hay and forage equipment, including self-propelled forage harvesters and attachments, balers, and mowers; turf and utility equipment, including riding lawn equipment, commercial mowing equipment, golf course equipment, utility vehicles, implements for mowing, tilling, snow and debris handling, aerating, and other residential, commercial, golf, and sports turf care applications; and related attachments and service parts.

SAT equipment is sold primarily through independent retail dealer networks, although the segment also builds turf products for sale by mass retailers, including The Home Depot and Lowe’s. Our turf equipment is sold primarily in North American, Western European, and Australian markets.

In the small agriculture market, we are developing autonomous solutions, connectivity capabilities, and a path to electrifying our future by delivering a portfolio that helps current customers meet sustainability goals while finding innovative ways to serve new customers and unlock new markets for mechanization at scale.

In addition to John Deere brand names, the table below provides a list of select SAT products and their associated brand names:

PRODUCT	BRAND NAME
Equipment Attachments	Frontier, Kemper, GreenSystem, Smart Apply
Sprayers	GUSS
Aftermarket and Precision Updates	A&I, Sunbelt Outdoor Products, Alternatives by John Deere, Frontier

Agriculture and Turf Operations

Business Environment. Sales of agricultural equipment are affected by total farm cash receipts, which reflect levels of farm commodity and protein prices, world grain stocks, acreage available and planted, crop yields, soil conditions, farm input costs, government policies, including global trade policies, and the amount and timing of government support. Sales also are influenced by general economic conditions, farmland prices, farmers’ debt levels and access to financing, interest and exchange rates, labor availability and costs, energy costs and related policies, tax policies, policies related to climate change, and other input costs associated with farming. Other key factors affecting new agricultural equipment sales are the value, age, and level of used equipment, including tractors, harvesting equipment, self-propelled sprayers, hay and forage equipment, and seeding equipment. Weather and climatic conditions also can affect buying decisions of agricultural equipment purchasers.

We believe innovations in machinery and technology may influence purchases of agricultural equipment, especially when the agricultural environment is challenging. For example, larger, more productive equipment is well accepted where farmers are striving for more efficiency in their operations to increase profits. Large, cost-efficient, highly mechanized agricultural operations account for an important share of worldwide farm output. These customers are increasingly adopting and integrating precision agricultural technologies like guidance, telematics, automation, and data-driven management in their operations. The large-size agricultural equipment used on such farms has been particularly important to us. A large proportion of the equipment operations’ total agricultural equipment sales in the U.S. and Canada, as well as in many countries outside the U.S. and Canada, are comprised of (1) tractors over 100 horsepower, (2) self-propelled combines, cotton pickers, forage harvesters, and sprayers, and (3) seeding equipment.

Agricultural trends, including the production of and demand for renewable fuels, including biofuels, can also impact sales. This growing demand has led to a corresponding increase in the need for agriculturally based feedstocks used in their production, such as corn in the U.S. and Europe and sugar cane in Brazil. This increased demand may increase the demand for agricultural equipment to be used in the production of such crops. In addition, policies and market drivers such as federal mandates requiring renewable fuel blending, and global regulations in regions and countries like Europe and Brazil, are expected to increase demand for renewable fuels.

We also rely on the sale of small and mid-size tractors as part of our global business. Customers use these tractors for small and medium-sized farming and in specialty agricultural industries like dairy, livestock, and high value crops (e.g., orchards and vineyards). The majority of our mid-size tractors are manufactured and sold in Europe, while the majority of our small tractors are manufactured and sold in India. Retail sales of lawn and garden tractors, compact utility tractors, residential and commercial mowers, utility vehicles, and golf and turf equipment are influenced by the housing market, weather conditions, consumer spending patterns, and general economic conditions like unemployment, interest rates, and inflation.

Regions. Sales and marketing support for both the PPA and SAT segments is organized around four geographic regions: (1) Africa, Asia, and the Middle East; (2) Europe, and the Commonwealth of Independent States (CIS); (3) Latin America and South America; and (4) U.S., Canada, and Australia.

The majority of our sales occur in the U.S. and Canada; however, we continue to grow our business and invest in other regions. In June of 2025, we celebrated our 25th anniversary of operations in Brazil. In 2024, we built a research and development center in Indaiatuba, Brazil dedicated to tropical agriculture and serving our customers in the region. Our growth in Brazil is just one example of deploying capital to areas where we can unlock the greatest value for our customers—a hallmark of our Smart Industrial Operating Model.

Seasonality. Seasonal patterns in retail demand for agricultural equipment can result in substantial variations in the volume and mix of products sold to retail customers during the year. In general, retail sales to farmers are based on the timing of planting and harvesting seasons around the globe.

Seasonal demand is estimated in advance, and equipment is manufactured in anticipation of such demand to achieve efficient utilization of personnel and facilities throughout the year. The PPA and SAT segments can incur substantial seasonal variations in cash flows to finance production and inventory of agricultural and turf equipment. The segments also incur costs to finance sales to dealers in advance of seasonal demand.

For certain equipment, we offer early order programs, which can include incentives to retail customers who place orders well in advance of the use season. Production schedules are based, in part, on these early order programs; however, during periods of high demand, some factories may still produce after the use season. New combines, cotton harvesting equipment, planters and tillage equipment, and sprayers are sold under early order programs, with waivers of retail finance charges available to customers who take delivery of machines during non-use seasons.

In Australia, Canada, and the U.S., there are typically several used equipment trade-in transactions that take place in connection with most new agricultural equipment sales. To provide support to our dealers in these countries for carrying and ultimately selling this used inventory to retail customers, we provide these dealers with pools of funds awarded as a percentage of the dealer price for eligible new equipment sales at the time of the new equipment settlement.

Retail demand for turf and utility equipment is normally higher in the second and third fiscal quarters based on weather, turf maintenance needs, landscaping projects, and sports and recreational facilities preparation. We have pursued a strategy of building and shipping such equipment as close to retail demand as possible. Consequently, to increase asset turnover and reduce the average level of field inventories throughout the year, production and shipment schedules of these product lines are normally proportionately higher in the second and third fiscal quarters of each year, corresponding closely to the seasonal pattern of retail sales.

Construction & Forestry

Our CF segment is committed to meeting the need for smart and more sustainable solutions to help our customers meet industry challenges, including jobsite safety, a shortage of skilled labor, volatile input costs, reducing rework, maximizing uptime, and minimizing their environmental footprint.

To address these challenges, we have delivered a portfolio of construction, roadbuilding, and forestry products with precision technology solutions. Our smart solutions such as SmartWeigh™, Smart Grade™, machine and system automation, and the John Deere Operations Center™, are designed to allow customers to complete more functions with fewer inputs, reduce rework and guesswork, and transform data into insights to allow for better decisions. Obstacle detection solutions such as SmartDetect™ supplement operator visibility on the jobsite through a combination of cameras, radar, and machine learning. Additionally, we plan to deliver hybrid-electric and battery electric equipment solutions to help customers reduce tailpipe emissions without sacrificing power and performance.

In addition to creating solutions for the challenges mentioned above, our CF training team is providing comprehensive sales, technical, parts, and operator training for dealers and customers so that the features and technologies of our solutions are understood and utilized with the goal of maximizing customer productivity, jobsite safety, and uptime.

Our construction products include excavators, motor graders, crawler dozers and loaders, wheel loaders, backhoes, and articulated dump trucks. Our compact construction products include skid steers, compact excavators, compact wheel loaders, and compact track loaders. Our Wirtgen roadbuilding products include milling machines, recyclers, slipform pavers, surface miners, asphalt pavers, compactors, tandem and static rollers, mobile crushers and screens, and mobile and stationary asphalt plants. The Wirtgen brand also provides a technology stack aimed at allowing customers to make smarter and more sustainable decisions. Technology offerings include Wirtgen Performance Tracker, Mill Assist, Level Pro, Vögele Roadscan, Smart Compact, WITOS Paving, Spective Connect, AutoTrac™, John Deere Connected Support™, and John Deere Operations Center™. The construction, compact construction, and Wirtgen products also include related attachments and service parts.

In forestry, our primary products include skidders, wheeled and tracked feller bunchers, forwarders, knuckleboom loaders, wheeled and tracked harvesters, swing machines, and precision forestry technology solutions such as Intelligent Boom Control, TimberMatic™ maps, and TimberManager™—a web-based solution allowing customers to follow progress on the jobsite. These solutions allow customers to closely track jobsite progress and provide visibility into fleet location, utilization, performance, and maintenance information.

We have a number of initiatives in the rent-to-rent, or short-term rental, market for construction, earthmoving, roadbuilding, and material handling equipment. These include specially designed rental programs for our dealers and expanded cooperation with major national equipment rental companies.

We own retail forestry sales operations in Australia, Brazil, Finland, Ireland, New Zealand, Norway, Sweden, and the United Kingdom. In addition, the Wirtgen Group sells its products primarily through company-owned sales and service subsidiaries in many markets worldwide (most significantly in Europe, India, and Australia). In most other geographies, we sell through an independent dealer channel.

The prevailing levels of residential, commercial, and public construction, investment in infrastructure, and the condition of the forestry products industry influence retail sales of our construction, roadbuilding, and forestry equipment. General economic conditions, interest rates, uncertainty related to trade policies, government spending, the availability of credit, and certain commodity prices, such as those applicable to oil and gas, pulp, paper, and saw logs, also influence sales.

In addition to John Deere brand names, the table below provides a list of CF products and their associated brand names:

PRODUCT	BRAND NAME
Roadbuilding Equipment	Wirtgen, Vögele, Hamm, Kleemann, Benninghoven, Ciber
Forestry Attachments	Waratah

Competition

The equipment operations sell products and services in a variety of competitive global and regional markets. The principal competitive factors in all markets include product performance, technology features, innovation, quality, distribution, sustainability, financing, customer service, and value. John Deere’s brand recognition is a competitive factor in North America and many other parts of the world.

The agricultural equipment industry continues to change and is becoming even more competitive through the emergence and global expansion of many competitors. The competitive environment for the agriculture and turf operations includes some global competitors, such as AGCO Corporation, CLAAS KGaA mbH, CNH Industrial N.V., Kubota Tractor Corporation, and The Toro Company.

These competitors have varying numbers of product lines competing with our products and each has varying degrees of regional focus.

Additional competition within the agricultural equipment industry has come from a variety of short-line and specialty manufacturers, as well as local or regional competitors, with differing manufacturing and marketing methods. As technology increasingly enables enhanced productivity in agriculture, the industry is also attracting non-traditional competitors, including technology-focused companies and start-up ventures.

Our forestry and roadbuilding businesses operate globally. The construction business operates in competitive markets in North and South America, as well as other global markets. Global competitors of the CF segment include Caterpillar Inc., CNH Industrial N.V., Doosan Infracore Co., Ltd. and its subsidiary Doosan Bobcat Inc., Fayat Group, GOMACO Corporation, Hitachi Construction Machinery, Komatsu Ltd., Kubota Tractor Corporation, LGMG, Liugong, Ponsse Plc, SANY Group Co., Ltd., SDLG, Terex, Tigercat Industries Inc., Volvo Construction Equipment (part of Volvo Group AB), and XCMG.

Parts and Services

The quality and timely availability of our parts and services are important for each of our equipment operations, as they are elements to overall customer satisfaction and our customers’ purchasing decisions. We supply parts, many of which are proprietary, to support the current product lines as well as products we have sold in the past. We also offer aftersales customer assistance programs that provide a range of maintenance and repair contracts, as well as warranty extension services, to cover a variety of customer needs and to support the equipment’s value over time.

Our precision technology is integrated into our equipment as well as offered as aftermarket parts of retrofit solutions through our dealer network and owner support tools sold through our e-commerce John Deere Store. We support our connected machines, which integrate technology with our equipment through our John Deere Operations Center™ with service alerts, operator insights, and predictive repairs and maintenance.

Manufacturing and Assembly

Our global manufacturing footprint allows us whenever possible to produce our products close to the markets where they are sold. For example, most of our large agricultural equipment is assembled in the U.S. for our U.S. customers.

Common manufacturing processes and techniques are used in producing components for PPA, SAT, and CF equipment sold by us and our dealers. The equipment operations also pursue external sales of selected parts that can be manufactured and supplied to third parties on a competitive basis, including engines, power train components, and electronic components.

Considerable effort is being dedicated to manufacturing cost optimization through improvements in process, optimization of factories, including product line relocation, product design, advanced manufacturing technology, and supply management and logistics, as well as compensation incentives related to productivity and organizational structure. We are also integrating emerging technologies such as artificial intelligence driven analytics and advanced robotics into our manufacturing processes where appropriate.

Our manufacturing, logistics, and scheduling systems are dependent on forecasts of industry volumes and our anticipated share of industry sales. In addition, based on dealer and customer demand, we can adjust our assembly lines to accommodate a wide product mix.

See Item 2 “Properties” in this Annual Report on Form 10-K for more information about our manufacturing facilities.

Research and Development; Patents, Trademarks, Copyrights, and Trade Secrets

We make substantial investments in research and development to improve the quality and performance of our products, to develop new products and technologies to meet our customers’ needs, to integrate sustainable solutions into our products, and to comply with government, safety, and engine emissions regulations.

Our research and development activities are a vital component in our Smart Industrial Operating Model as customers seek to improve profitability, productivity, and sustainability through technology. Integration of technology into equipment is a persistent market trend, and we continue to capitalize on this market trend.

We own a significant number of patents, trademarks, copyrights, trade secrets, and intellectual property licenses related to our products and services and expect the number to grow as we continue to pursue technological innovations. We further our competitive position by filing patent and trademark applications in the U.S. and internationally to protect technology, improvements considered important to the business, and our brand. We believe that our rights under these patents and licenses are important to our operations and competitive position but do not regard any of our businesses as being dependent upon any single patent or family of patents. See Item 1A Risk Factors, “Legal and Regulatory Compliance Risks—Our business could be adversely affected by the infringement or loss of intellectual property rights” for more information.

Sales and Distribution

Through the U.S. and Canada, we market products to approximately 2,050 independent dealer locations. Of these, approximately 1,600 sell agricultural equipment, while approximately 450 sell construction, earthmoving, material handling, roadbuilding, compact construction, and/or forestry equipment. In addition, roadbuilding equipment is sold at approximately 100 roadbuilding-only locations that may carry products that compete with our construction, earthmoving, material handling, and/or forestry equipment. Turf equipment is sold at most John Deere agricultural equipment locations, a few construction and forestry locations, and about 260 turf-only locations. In addition, certain lawn and garden and compact construction products are sold through The Home Depot and Lowe’s.

Outside the U.S. and Canada, our agriculture and turf equipment is sold to distributors and dealers for resale in over 100 countries. Sales and administrative offices are located in Argentina, Australia, Brazil, China, France, Germany, India, Italy, Mexico, Poland, Singapore, South Africa, Spain, Ukraine, and the United Kingdom. Turf equipment sales outside the U.S. and Canada occur primarily in Western Europe and Australia. Construction, earthmoving, material handling, and forestry equipment is sold to distributors and dealers primarily by sales offices located in Australia, Brazil, Finland, Ireland, New Zealand, Norway, Singapore, Sweden, and the United Kingdom. Some of these dealers are independently owned while we own others. Roadbuilding equipment is sold directly to retail customers and independent distributors and dealers for resale.

The Wirtgen Group operates company-owned sales and service subsidiaries in Australia, Austria, Belgium, Brazil, Bulgaria, China, Denmark, Estonia, Finland, France, Georgia, Germany, Hungary, India, Ireland, Italy, Japan, Latvia, Lithuania, Malaysia, the Netherlands, Norway, Poland, Romania, Singapore, South Africa, Sweden, Taiwan, Thailand, Turkey, Ukraine, and the United Kingdom.

The equipment operations operate centralized parts distribution warehouses in the U.S., Brazil, and Germany in coordination with regional parts depots and distribution centers in Argentina, Australia, Canada, China, India, Mexico, South Africa, Sweden, and the United Kingdom.

We market engines, power trains, and electronic components worldwide through select sales branches or directly to regional and global original equipment manufacturers and independently owned engine distributors.

We provide our dealers with volume sales incentives, demonstration programs, and other advertising support to assist sales. We design our sales programs, including retail financing incentives, and our policies for maintaining parts and services availability with product warranties to enhance our dealers’ competitive position.

Raw Materials

We source raw materials, manufactured components, and replacement parts for our equipment, engines, and other products from leading suppliers globally. These materials and components include a variety of steel products, metal castings, forgings, plastics, hydraulics, electronics, and ready-to-assemble components made to certain specifications. We also source various goods and services used for production, logistics, operations, and research and development.

We develop and maintain sourcing strategies for our purchased materials and emphasize long-term supplier relationships at the core of these strategies. We use a variety of agreements with suppliers intended to drive innovation, maximize availability and delivery of raw materials and components, help manage costs on a globally competitive basis, protect our intellectual property, and minimize other supply-related risks.

We are focused on increasing the resiliency of our supply chain and monitoring supply chain risks to minimize the likelihood of business disruptions caused by the supply base, including as a result of supplier financial viability, capacity, business continuity, labor availability, quality, delivery, cybersecurity, weather-related events, natural disasters, geo-political instability, and trade policies.

We have implemented mitigation efforts to minimize the impact of potential and actual supply chain disruptions on our customers. Examples include working with the supply base to prioritize allocations to improve material availability, multi-sourcing selected parts and materials, entering long-term contracts for some critical components, and using alternative freight carriers to expedite delivery.

Backlog Orders

The dollar amount of backlog orders as of November 2, 2025, was approximately $4.0 billion for the PPA segment and $1.9 billion for the SAT segment, compared with $5.2 billion and $2.1 billion, respectively, at October 27, 2024. Backlog orders decreased as demand has declined. The agriculture and turf backlog are generally highest in the second and third quarters due to seasonal buying trends in these industries. The dollar amount of backlog orders for the CF segment was approximately $3.8 billion at November 2, 2025, compared with $2.2 billion at October 27, 2024 as planned production levels increase in line with retail demand. Backlog orders for equipment operations include all orders deemed to be firm as of the referenced date.

Financial Services

U.S. and Canada. The financial services segment primarily provides and administers financing for retail purchases from our dealers of new equipment manufactured by our equipment operations, as well as used equipment taken in trade for this equipment. The Company and John Deere Construction & Forestry Company (a wholly-owned subsidiary of the Company) are referred to as the “sales companies.” John Deere Capital Corporation (Capital Corporation), a U.S. financial services subsidiary, generally purchases retail installment sales and loan contracts (retail notes) from the sales companies. In Canada, John Deere Financial Inc., a Canadian financial services subsidiary, purchases and finances retail notes acquired by John Deere Canada ULC, our Canadian sales company. The terms of retail notes and the basis on which the financial services operations acquire retail notes from the sales companies are governed by agreements with the sales companies. The financial services segment also finances and services revolving charge accounts, in most cases acquired from and offered through third-party merchants in the agricultural and turf markets. Additionally, the financial services operations provide wholesale financing to dealers of our agriculture and turf equipment and construction and forestry equipment (wholesale notes), primarily to finance inventories of equipment for those dealers. The various financing options offered by the financial services operations are designed to enhance sales of our products and generate financing income for the financial services operations. In the U.S. and Canada, certain subsidiaries included in the financial services segment offer extended equipment warranties.

Retail notes acquired by the sales companies are immediately sold to the financial services operations. The equipment operations are the financial services operations’ major source of business, although many retail purchasers of our products finance their purchases outside our organization through a variety of sources, including commercial banks and finance and leasing companies.

The financial services operations offer retail leases to equipment users in the U.S. and a small number of leases are executed with units of local governments. Leases are usually written for periods ranging from less than one year to seven years and typically contain an option permitting the customer to purchase the equipment at the end of the lease term. Retail leases also are offered in a generally similar manner to customers in Canada.

The financial services operations’ terms for financing equipment retail sales (other than smaller items financed with unsecured revolving charge accounts) generally provide for retention of a security interest in the equipment financed. Finance charges are sometimes waived for specified periods or reduced on certain John Deere products sold or leased in advance of the season of use or in other sales promotions. The financial services operations generally receive compensation from the sales companies at approximate market interest rates for periods during which finance charges are waived or reduced on the retail notes or leases. The cost is accounted for as a deduction in arriving at net sales by the equipment operations.

We have an agreement with Capital Corporation to make payments to Capital Corporation such that its consolidated ratio of earnings to fixed charges is not less than 1.05 to 1 for any four consecutive fiscal quarterly period. We also have committed to continuing to own, directly or through one or more wholly-owned subsidiaries, at least 51% of the voting shares of capital stock of Capital Corporation and to maintain Capital Corporation’s consolidated tangible net worth at not less than $50. Our obligations to make payments to Capital Corporation under this agreement are independent of whether Capital Corporation is in default on its indebtedness, obligations, or other liabilities. Further, our obligations under the agreement are not measured by the amount of Capital Corporation’s indebtedness, obligations, or other liabilities. Our obligations to make payments under this agreement are expressly stated not to be a guaranty of any specific indebtedness, obligation, or liability of Capital Corporation and are enforceable only by or in the name of Capital Corporation. As of November 2, 2025, we were in compliance with all of our obligations, and no payments were required under this agreement in fiscal year 2025 or fiscal year 2024. As of November 2, 2025, we indirectly owned 100% of the voting shares of Capital Corporation’s capital stock and Capital Corporation’s consolidated tangible net worth was $5,929.8.

Outside the U.S. and Canada. The financial services operations also offer financing, primarily for our products, in Argentina, Australia, India, Mexico, New Zealand, and in several other countries in Africa, Asia, Europe, and Latin America. In certain markets, financing is offered through cooperation agreements or joint ventures with other financial institutions. For example, in the second quarter of fiscal year 2025, we completed a transaction with a Brazilian bank, Banco Bradesco S.A. (Bradesco), for Bradesco to invest and become 50% owner of our subsidiary in Brazil, Banco John Deere S.A. The way the financial services operations offer financing is affected by a variety of country-specific laws, regulations, and customs, including those governing property rights and debtor obligations, which are subject to change, and which may introduce greater risk to the financial services operations.

The financial services operations also offer to select customers and dealers credit enhanced international export financing primarily for the purchase of our products.

Additional information on the financial services operations is provided in the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” (MD&A) section in this Annual Report on Form 10-K.

Environmental Matters

We are subject to a variety of local, state, and federal environmental laws and regulations in the U.S., as well as the environmental laws and regulations of other countries in which we conduct business. In the event of noncompliance, we could be subject to substantial fines and other penalties. Compliance with these laws and regulations adds to the cost of our production operations and compliance with emissions regulations adds to the cost of our products.

In fiscal year 2025, compliance with environmental controls applicable to us did not have a material effect on our capital expenditures, earnings, or competitive position. At this time, we do not expect to incur material capital expenditures related to environmental controls during fiscal year 2026.

The U.S., the European Union (EU), India, and other governments throughout the world have enacted, and continue to enact, laws and regulations to reduce off-road engine emissions. Compliance with these regulations requires significant investment in the development of new engine technologies and after-treatment systems.

Governments also are implementing laws regulating products across their life cycles, including raw material sourcing and the storage, production, packaging, distribution, sale, use, and disposal of products at their end of life. These laws and regulations include requirements to develop less hazardous chemical substances and products, right-to-know, restriction of hazardous substances, and product take-back laws.

We continually evaluate, clean-up, or conduct corrective action at a limited number of sites. We cannot guarantee that these matters or other expenses or liabilities we may incur in connection with any noncompliance with environmental laws, regulations, or the clean-up of any properties, will not have a material adverse effect on our consolidated financial position, results of operations, cash flows, or competitive position.

We continue to monitor and review developing sustainability frameworks, standards, and global regulations, such as the European Union’s Corporate Sustainability Reporting Directive (CSRD), and California’s SB-253 (Climate Corporate Data Accountability Act) and SB-261 (Climate-Related Financial Risk Act).

With respect to properties and businesses that have been or will be acquired, we conduct due diligence into potential exposure to environmental liabilities but cannot be certain that we have identified, or will identify, all adverse environmental conditions.

Government Regulations

We are subject to a wide variety of local, state, and federal laws and regulations in the countries where we operate. These laws and regulations include a range of trade, antitrust, product, anti-bribery and anti-corruption, data protection and privacy, foreign exchange, tax, labor and employment, environmental, health and safety, telecommunications, intellectual property, human rights, and other laws and regulations.

Compliance with these laws and regulations requires the dedication of time and effort of our employees, as well as financial resources. In fiscal year 2025, compliance with the regulations applicable to us did not have a material effect on our capital expenditures, earnings, or competitive position.

At this time, we do not expect to incur material capital expenditures related to compliance with regulations during fiscal year 2026. Additional information about the impact of government regulations on our business is included in Item 1A, “Risk Factors–Strategic Risks” and “Legal and Regulatory Compliance Risks.”

Human Capital Management

Our employees are guided by a simple principle: We run so life can leap forward. Our approach to human capital management is rooted in our core values: Integrity, Quality, Humanity, Commitment, and Innovation, which serve as the foundation for our workforce’s actions and decisions. These values are embedded within our Global Performance Management (GPM) program. Through GPM we foster a culture of continuous feedback and ongoing improvement.

Employees

At November 2, 2025, we had approximately 73,100 employees, of which approximately 32,500 were full-time production employees. We had 27,000 total employees in the U.S. of which approximately 11,600 were full-time production employees. We also retain consultants, independent contractors, and temporary and part-time workers. We are an equal opportunity employer committed to providing a workplace free of harassment and discrimination.

Unions are certified as bargaining agents for approximately 77% of our U.S. production and maintenance employees. Approximately 7,600 of our active U.S. production and maintenance workers are covered by a collective bargaining agreement with the United Auto Workers (UAW), with an expiration date of November 1, 2027. A small number of U.S. production employees are represented by the

International Association of Machinists and Aerospace Workers (IAM). Collective bargaining agreements covering our employees in the U.S. expire between 2025 and 2027. Unions also represent the majority of employees at our manufacturing facilities outside the U.S.

There is no guarantee that we will be able to renew collective bargaining agreements or whether such agreements will be on terms satisfactory to us. For further discussion, see Item 1A Risk Factors “Talent Risks—Our business may be adversely affected by any disruptions caused by union activities.”

Code of Conduct

We are committed to conducting business in accordance with the highest ethical standards. We require all employees to complete training on our Code of Business Conduct. The Code provides specific guidance to all our employees outlining how they can and must uphold and strengthen the integrity that has defined John Deere since our founding. In addition, we maintain a global compliance hotline to report concerns of potential violations of the Code, global policies, or the law.

Training and Development

As our business segments evolve, we need a workforce equipped to address new opportunities and challenges.

We offer our employees upskill training, career planning, and leadership development to better prepare our employees for future career opportunities at Deere. We have tools and solutions for continuous learning and career development, along with training programs that are tailored to different geographic regions and job functions. Examples of such training include technical operation of equipment, robotics, automation, equipment assembly, and interpersonal skills for establishing relationships with customers and dealers.

Compensation and Benefits

Our total rewards are intended to be competitive, meet the varied needs of our global workforce, and reinforce our values. We are committed to providing comprehensive and competitive pay and benefits to our employees. We continue to invest in employees through growth, development, and well-being initiatives.

Our work environment is designed to promote innovation, well-being, and reward performance. Our total rewards for employees include a variety of components that aim to support our employees in building a strong financial future, including competitive market-based pay and comprehensive benefits. In addition to earning base pay, eligible employees are compensated for their contributions to our goals with both short-term cash incentives and long-term equity-based incentives.

Eligible full-time employees in the U.S. have access to medical, dental, and vision plans; savings and retirement plans; parental leave and paid time off; and mental health and wellness services.

Programs and benefits differ internationally for a variety of reasons, such as local legal requirements, market practices, and negotiations with works councils, trade unions, and other employee representative bodies.

Health and Safety

We strive to achieve safety excellence through increased focus on injury prevention, leading indicators, risk reduction, and health and safety management systems. We have made progress on implementing best practices and leading indicators for enabling employee safety over recent years with our Health and Safety Management System.

We utilize a safety balanced scorecard, which includes leading and lagging indicators, and is designed to enable continuous measurement of safety performance and drive continuous improvement. Leading indicators include completion of risk reduction projects targeting highest factory risks as well as safety engagements with employees. Lagging indicators include total recordable incident rate, number of Potential Serious Injuries or Fatalities (PSIF) or Serious Injuries or Fatalities (SIF) events, and higher order of control corrective actions from PSIF and SIF events. Leading and lagging indicators are tracked by most of our manufacturing facilities and internally reported.

In fiscal year 2025, we reported a total recordable incident rate of 1.45, a safety metric used to measure the number of recordable incidents per 100 full-time employees per year; and a lost time frequency rate of 0.61, a safety metric used to measure the number of lost time incidents per 100 full-time employees.

Employee Engagement

We continue to build and sustain a workplace where all employees feel valued, respected, and inspired to do their best work every day. We gather feedback from our employees through a variety of channels throughout the year, such as surveys, focus groups, and conversations regarding continuous improvement. We build on our higher purpose, our core values, and our business strategy in a way that engages, inspires, and recognizes our workforce so they can support our customers in solving their biggest challenges.

Available Information

Our internet address is http://www.deere.com. We make the following reports filed by us available, free of charge, on our website under the “Investors” section, including any amendments thereto, as soon as reasonably practicable after they are filed or furnished with the United States Securities and Exchange Commission (SEC or Commission):

	●	Annual Report on Form 10-K,

	●	Quarterly Reports on Form 10-Q, and

	●	Current Reports on Form 8-K.

These filings are also available at a website maintained by the SEC at http://www.sec.gov. The information contained on our website is not included in, nor incorporated by reference into this Annual Report on Form 10-K.

INFORMATION ABOUT OUR EXECUTIVE OFFICERS

The following are our executive officers as of December 2, 2025. All executive officers are elected or appointed by the Board of Directors and hold office until the meeting of the Board of Directors following the annual meeting of stockholders each year.

​

	​			​
Name (Age)	​		Present Deere Position (Effective Date)	​		Business Experience (Effective Date)
John C. May (56)	​		Chairman, Chief Executive Officer, and President (2020)	​		- Chief Executive Officer and President (2019) - President and Chief Operating Officer (2019)
Joshua A. Jepsen (48)	​		Senior Vice President and Chief Financial Officer (2022)	​		- Deputy Financial Officer (2022) - Director, Investor Relations (2018)
Ryan D. Campbell (51)	​		President, Worldwide Construction & Forestry and Power Systems (2022)	​		- Senior Vice President and Chief Financial Officer (2019)
Jahmy J. Hindman (50)	​		Senior Vice President and Chief Technology Officer (2023)	​		- Chief Technology Officer (2020)
Rajesh Kalathur (57)	​		President, John Deere Financial, and Chief Information Officer (2022)	​		- President, John Deere Financial and Senior Vice President, Global Information Technology and Chief Financial Officer (2022) - President, John Deere Financial, and Chief Information Officer (2019)
Deanna M. Kovar (47)	​		President, Worldwide Agriculture & Turf Division, Production & Precision Ag, Sales and Marketing Regions of the Americas and Australia (2025)	​		- President, Worldwide Agriculture & Turf Division, Small Ag & Turf, Sales and Marketing Regions of Europe, CIS, Asia, and Africa (2023) - Vice President, Production Systems, Production & Precision Ag (2023) - Vice President, Production Systems (2020)
Felecia J. Pryor (51)	​		Senior Vice President and Chief People Officer (2022)	​		- Executive Vice President & Chief Human Resources Officer, BorgWarner Inc. (2022) - Global Vice President Human Resources, BorgWarner, Inc. - Morse Systems (2019)
Cory J. Reed (55)	​		President, Lifecycle Solutions, Supply Management, and Customer Success (2025)	​		- President, Worldwide Agriculture & Turf Division, Production & Precision Ag, Sales and Marketing Regions of the Americas and Australia (2020)
Justin R. Rose (46)	​		President, Worldwide Agriculture & Turf Division, Small Ag & Turf, Sales and Marketing Regions of Europe, CIS, Asia, and Africa (2025)	​		- President, Lifecycle Solutions, Supply Management, and Customer Success (2022) - Senior Partner and Managing Director, Boston Consulting Group (BCG) (2020)
Kellye L. Walker (59)	​		Senior Vice President, Corporate Secretary, and Chief Legal Officer, Global Law Services & Regulatory Affairs (2024)	​		- Executive Vice President, Chief Legal Officer, and Corporate Secretary, Eastman Chemical Company (2020)

​

​

​

| --- | --- |

The following risks are considered material to our business based upon current knowledge, information, and assumptions. This discussion of risk factors should be considered closely in conjunction with the MD&A, including the risks and uncertainties described in the Forward-Looking Statements, and the Notes to Consolidated Financial Statements. These risk factors and other forward-looking statements relate to future events, expectations, trends, and operating periods. They involve factors that are subject to change and important risks and uncertainties that could cause actual results to differ materially. Some of these risks and uncertainties could affect particular lines of business, while others could affect all our businesses. Although the risks are organized by headings and each risk is discussed separately, many are interrelated. The risks described in this Annual Report on Form 10-K and the Forward-Looking Statements are not the only risks we face.

GEOPOLITICAL AND MACROECONOMIC RISKS

Our financial results largely depend upon the agricultural market business cycle, as well as general economic conditions and outlook. Negative conditions in the agricultural industry and general economy cause weakened demand for our equipment and services, limit access to funding, and result in higher funding costs.

Our success largely depends on the vitality of the agricultural industry. Historically, the agricultural industry has been cyclical and subject to a variety of economic and other factors; consequently, sales of agricultural equipment are also cyclical and generally reflect the economic health of the agricultural industry.

The economic health of the agricultural industry is affected by numerous factors, including farm income, international trade, farmland values, debt levels, and financing costs. In addition, farm income is influenced by commodity and protein prices, world grain stocks, acreage available and planted, crop yields, agricultural product demand, soil conditions, farm input costs, government policies and support. Changes in government farm programs and policies can influence demand for agricultural equipment as well as create unequal competition for multinational companies relative to domestic companies. Downturns in the agricultural industry due to these and other factors, which could vary by market, have resulted in decreases in demand for agricultural equipment, adversely affecting our business and financial performance.

The demand for our products and services depends on the fundamentals in the markets in which we operate and can be significantly reduced in an economic environment characterized by high unemployment, high interest rates, cautious consumer spending, inflation, lower corporate earnings, and lower business investment, all of which affect farmers’ income and sentiment. In fiscal year 2025, unfavorable market conditions resulted in lower sales volumes, greater reliance on sales incentives, and elevated receivable write-offs. We expect certain of these conditions to persist in fiscal year 2026. Changes in the economic environment and the agricultural market business cycle are driven by factors outside of our control, and as a result we cannot reasonably foresee when these conditions will fully subside.

Sustained general negative economic conditions and outlook could also affect construction and housing activities, and energy prices and demand, which could decrease demand for construction and turf equipment and could have a material adverse effect on our financial results.

Uncertain or negative outlook with respect to pervasive U.S. fiscal issues as well as general economic conditions and outlook, such as market volatility, inflation, or interest rate changes, have caused and could continue to cause significant changes in market liquidity conditions. Such changes could impact access to funding and associated funding costs, which could reduce our earnings and cash flows.

We face risks associated with international, national, and regional trade laws, regulations, and policies that could materially impair our profitability.

International, national, and regional laws, regulations, and policies directly or indirectly related to or restricting the import and export of our products, services, and technology, or those of our customers or suppliers, or for the benefit of favored industries or sectors, have harmed our global business. We are subject to various trade regulatory risks including, but not limited to, the following:

	●	The imposition of tariffs and retaliatory tariffs has impacted, and we expect will continue to impact, the sourcing of parts and components, the cost and profitability of manufacturing operations, and our ability to ship, import, and export our products. During fiscal year 2025, new tariffs were imposed in the U.S. for imports from a broad range of countries and materials. Several countries also implemented or proposed retaliatory tariffs on imports from the U.S., as well as other barriers to trade. As a net exporter of agriculture and turf equipment from the U.S., these trade policies impact us. Nearly 80% of our domestic sales are assembled in the U.S., with the remaining products imported primarily from Europe, Mexico, India, and Japan. During fiscal year 2025, incremental import tariffs adversely affected the cost of our products and components and may continue to do so in 2026. In addition, retaliatory tariffs by regions outside the U.S., currently in effect or adopted in the future, may impact the prices of our

		exported products and the profit realized from these exports. The direct impact of incremental tariffs incurred by us in 2025 was approximately $600, excluding the impact of tariffs on our suppliers and market demand. On November 5, 2025, the United States Supreme Court heard oral arguments on tariffs imposed under the International Emergency Economic Powers Act (IEEPA). The court may provide tariff relief and the potential recovery of amounts previously paid. We are monitoring developments in this case and its impact on our future financial statements and business.

	●	Changing U.S. export controls and sanctions on various foreign countries and on various parties could affect our ability to manufacture our products in foreign jurisdictions, collect receivables, provide aftermarket warranty support for our equipment and sell products, and could otherwise impact our reputation and business.

	●	Restricted access to global markets could impair our ability to export goods and services from various manufacturing locations around the world and limit the ability to access raw materials and high-quality parts and components at competitive prices on a timely basis.

	●	Trade restrictions could impede those in developing countries from achieving a higher standard of living, which could negatively impact our future growth opportunities arising from increasing global demand for food, fuel, and infrastructure.

	●	Policies impacting exchange rates and commodity prices, or those limiting the export or import of commodities, could have a material adverse effect on the international flow of agricultural and other commodities that may result in a corresponding negative effect on the demand for agricultural and forestry equipment in many areas of the world. Our agricultural equipment sales could be harmed by such policies because farm income influences sales of agricultural equipment around the world.

	●	If our business partners were to incur regulatory or judicial action, it could impact our ability to operate certain solutions abroad, or our connectivity to rural farmers.

**Our international operations expose us to risks and events beyond our control in countries in w

Showing the first 8K of 62K characters. Open the full section

| --- | --- |

None.

| --- | --- |

Cybersecurity is an integral part of our overall risk management program. We take a comprehensive approach by incorporating industry best practices to guide and evaluate our cybersecurity strategy and posture, involving key stakeholders in oversight and decision making, and assessing the program regularly within a dynamically changing environment. We leverage a multifaceted approach to cybersecurity including measures designed to prevent, detect, and respond to cyberthreats while monitoring and adapting to the evolving threat and technology landscapes.

Governance

At the management level, we maintain a dedicated global team of cybersecurity professionals (Cybersecurity Team) led and managed by the Chief Information Security Officer (CISO). The Cybersecurity Team has members with experience in governance, risk management and compliance, threat monitoring, threat emulation, penetration testing, and cyber incident management. Our CISO holds a degree in Management Information Systems and has been with the Company for over ten years. He has over two decades of extensive experience in information technology and cybersecurity and reports directly to the Chief Information Officer.

In addition, a cross-functional team of senior executives from across the enterprise known as the Digital Risk Governance Council (DRGC) provides oversight at the management level of the Company’s structures for managing digital risk, including the Cybersecurity Team. The Audit Review Committee (ARC) of the Board of Directors (Board) shares oversight responsibilities of our cybersecurity program, including oversight of related risks, with the full Board. Information on trends, strategic initiatives, and metrics is presented quarterly to the ARC by the CISO and/or members of the Cybersecurity Team. The ARC also receives periodic updates and information from subject matter experts in areas such as risk management, identity and access management, product security, and information technology.

Risk Management and Strategy

Our cybersecurity program is designed to identify, protect, detect, respond to, and recover from cybersecurity threats and incidents with the goal of protecting the confidentiality, integrity, and availability of our critical systems and information. We use a risk-based, multi-layered information security strategy to assess, identify, and manage risks from cybersecurity threats. Our Cybersecurity Team meets frequently to monitor, assess, and address cybersecurity threats and incidents. We also work with third parties to assess the maturity of our cybersecurity program, leveraging the National Institute of Standards and Technology (NIST) Cybersecurity Framework (CSF).

We also utilize third-party service providers as a normal part of our business operations. We have established processes to support the Company in identifying and managing cybersecurity risks associated with the use of third parties, which include the completion of due diligence before engaging with a third-party, controls for response to mitigate any significant risks, and assessments and reviews throughout the relationship. Monitoring such risks and threats is integrated into our overall risk management program.

Also, as part of the program, we periodically conduct cybersecurity awareness training including phishing simulations as well as e-learning for employees. We maintain cybersecurity policies, standards, and procedures, which include a cyber incident response plan. These policies and procedures are regularly evaluated and refined with strategies and protocols designed to adapt to changing regulations and emerging security risks. Regular exercises, tests, incident simulations, and system assessments are conducted to discover and address potential vulnerabilities and improve decision-making, prioritization, monitoring, and overall response effectiveness. As part of our incident response plan, the Cybersecurity Team uses an established protocol to assess the severity of cybersecurity incidents. In addition, a cross-functional Cybersecurity Incident Response Team is responsible for cybersecurity incident oversight and response, as needed, depending on incident severity. Our cyber incident response plan also includes an escalation process to relevant senior management and/or members of the Board if a cybersecurity incident meets specific rating criteria to prompt response to attempt to minimize potential disruptions and protect the integrity of our operations.

Based on the information available as of the date of this Annual Report on Form 10-K, cybersecurity risks, including as a result of any previous cybersecurity incident, have not materially affected, and are not reasonably likely to materially affect, our business strategy, results of operations, or financial condition. However, we have seen an increase in cyberattack volume, frequency, and sophistication in the digital environment and future incidents could have a material impact on our business, operations, or financial condition.

| --- | --- |

We own and lease properties throughout the world. Our properties are primarily used for manufacturing, marketing, parts distribution and warehousing, research and development, and administration. We consider each of our properties to be in good condition and adequate for its present use. We believe that we have sufficient capacity to meet our current and anticipated manufacturing requirements.

In the U.S. and Canada, the equipment operations own and operate 23 factory locations and lease and operate four locations for manufacturing purposes, as well as own and lease 12 facilities for distribution purposes. Outside the U.S. and Canada, the equipment operations own or lease and operate 45 factory locations for manufacturing purposes and 13 facilities for distribution purposes in various countries. Certain manufacturing facilities focus on manufacturing for one business segment and others for multiple business segments. We have parts distribution depots in our four geographic regions with the largest distribution depots located in the U.S.

The following table provides an overview of our significant manufacturing properties and the related business segment as of November 2, 2025.

	​		​
Location	​	Facility	​	Business Segment
Augusta, Georgia	​	John Deere Augusta Works Factory	​	SAT
Catalão, Brazil	​	John Deere Brasil Ltda (Catalão) Factory	​	PPA
Davenport, Iowa	​	John Deere Davenport Works Factory	​	CF
Des Moines, Iowa	​	John Deere Des Moines Works Factory	​	PPA
Dubuque, Iowa	​	John Deere Dubuque Works Factory	​	CF
East Moline, Illinois	​	John Deere Harvester Works Factory	​	PPA
Joensuu, Finland	​	Finland Forestry Factory	​	CF
Fuquay, North Carolina	​	John Deere Turf Care Factory	​	SAT
Getafae, Spain	​	John Deere Iberica, S.A.	​	PPA, CF, SAT
Göppingen, Germany	​	Kleemann GmbH	​	CF
Greeneville, Tennessee	​	John Deere Greeneville Factory	​	SAT
Horicon, Wisconsin	​	John Deere Horicon Works Factory	​	SAT
Horizontina, Brazil	​	John Deere Brazil SA Factory	​	PPA
Indaiatuba, Brazil	​	Brazil Construction Factory	​	CF
Kernersville, North Carolina	​	John Deere Kernersville Factory	​	CF
Ludwigshafen am Rhein, Germany	​	Vögele AG	​	CF
Mannheim, Germany	​	John Deere Werke Mannheim Factory	​	SAT, PPA
Montenegro, Brazil	​	John Deere Brazil Ltda Factory	​	PPA

Monterrey, Mexico	​	Industrias John Deere SA de CV Factory	​	SAT, PPA, CF
Pune, India	​	John Deere Pune Works Factory	​	SAT
Saran, France	​	Saran Engine Factory	​	SAT, PPA, CF
Tirschenreuth, Germany	​	Hamm AG	​	CF
Torréon, Mexico	​	Torréon Engine Factory	​	PPA, SAT, CF
Waterloo, Iowa	​	John Deere Engine Works John Deere Waterloo Foundry John Deere Waterloo Works	​	PPA, CF
Windhagen, Germany	​	Wirtgen GmbH	​	CF
Zweibrücken, Germany	​	John Deere Werke Zweibrücken Factory	​	PPA, SAT

​

| --- | --- |

On January 15, 2025, the Federal Trade Commission (FTC), along with the Attorneys General of the States of Illinois and Minnesota, filed a lawsuit against us in the United States District Court for the Northern District of Illinois Western Division. The Attorneys General of the States of Arizona, Michigan, and Wisconsin then joined the lawsuit. The lawsuit alleges monopolization and unfair competition in violation of federal and state antitrust laws. Plaintiffs seek a permanent injunction and other equitable relief to allow owners of our equipment, as well as independent repair providers, access to our repair tools and any other repair resources available to authorized John Deere dealers. On March 17, 2025, we filed a motion to dismiss the lawsuit, the FTC filed a response on April 28, 2025, and we filed a reply on May 28, 2025. A hearing was held on the motion to dismiss, and the court denied the motion. We are in preliminary discussions with the FTC with respect to a potential resolution. At this stage we are unable to predict the outcome or impact of this matter on our business.

In addition to the above, we are subject to various unresolved legal actions and investigations, the most prevalent of which relate to product liability (including asbestos related liability), employment, patent, trademark, and antitrust matters (including class action litigation). Currently we believe the reasonably possible range of losses for unresolved legal actions would not have a material effect on our financial statements; however, the outcome of any current or future proceedings, claims, or investigations cannot be predicted with certainty. Adverse decisions in one or more of these proceedings, claims, or investigations could require us to pay substantial damages or fines, undertake service actions, initiate recall campaigns, or take other costly actions. It is therefore possible that legal judgments or investigations could give rise to expenses that are not covered or not fully covered by our insurance programs and could affect our financial position and results.

| --- | --- |

Not applicable.

PART II

| --- | --- |

Market Information

Our common stock is listed on the New York Stock Exchange (NYSE) under the symbol “DE.”

Number of Shareholders

At November 28, 2025, we had 15,503 holders of record of our common stock.

Dividends

We have a history of paying quarterly cash dividends. While we currently expect a cash dividend to be paid in the future, future dividend payments will depend on our earnings, capital requirements, financial condition, and other factors considered relevant by our Board.

Issuer Purchases of Equity Securities

We have a share repurchase plan that was announced in December 2022 to purchase up to $18.0 billion of shares of our common stock. Shares may be repurchased through various means, including on the open market or in private transactions, under accelerated share repurchase programs, or under plans complying with rules 10b5-1 and 10b-18 under the Securities Exchange Act of 1934. The maximum number of shares that may yet be repurchased under this plan was 17.1 million based on the closing price of our common stock on the NYSE as of the end of the fourth quarter of 2025 of $461.63 per share. At the end of the fourth quarter of 2025, $7.9 billion of common stock remained to be purchased under this plan. There were no repurchases made during the three months ended November 2, 2025, pursuant to the share repurchase plan. In the fourth quarter of 2025, four thousand shares were acquired from plan participants at a weighted-average market price of $469.58 to pay payroll taxes on the vesting of a restricted stock award.

Sale of Unregistered Equity Securities

On August 5, 2025, we distributed 13,656 shares of common stock under the Deere & Company Nonemployee Director Stock Ownership Plan (“NEDSOP”). Under the terms of the NEDSOP, deferred stock units issued to nonemployee directors convert to shares of common stock on a one-for-one basis. Common stock issued under the NEDSOP are exempt from registration pursuant to Section 4(a)(2) of the Securities Act of 1933, as amended, and Rule 506 of the SEC’s Regulation D thereunder.

Stock Performance Graph

The following graph compares the yearly percentage change of Deere & Company’s cumulative total shareholder returns (TSR) for the last five years to that of the S&P 500 Index and the S&P 500 Industrials Index. The S&P 500 Industrials Index represents a focus group of companies across major industrial manufacturing categories that carry similar operational characteristics to us. The graph assumes $100 was invested on October 30, 2020, and that dividends were reinvested. The stock performance shown in the graph is not intended to forecast and does not necessarily indicate future price performance.

Comparison of 5 Year Total Cumulative Return*

Total Shareholder Returns (TSR) Performance

​

​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​
​	​	2020		​	2021		​	2022		​	2023		​	2024		​	2025		​
Company / Index	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​	​
Deere & Company	​	$	100.00	​	$	153.27	​	$	179.84	​	$	165.72	​	$	189.96	​	$	217.99	​
S&P 500	​	​	100.00	​	​	142.91	​	​	122.94	​	​	131.94	​	​	188.83	​	​	225.31	​
S&P 500 Industrials	​	​	100.00	​	​	139.83	​	​	128.81	​	​	133.62	​	​	190.66	​	​	221.76	​

​

​

​

​

| --- | --- |

​

| --- | --- |

See the information under the caption “Management’s Discussion and Analysis.”

| --- | --- |

We are exposed to a variety of market risks, including interest rates and currency exchange rates. We attempt to actively manage these risks. See the information under “Management’s Discussion and Analysis,” under “Financial Instrument Market Risk Information” and in Note 26 to the Consolidated Financial Statements.

| --- | --- |

See the Consolidated Financial Statements and notes thereto and supplementary data.

| --- | --- |

Not applicable.

| --- | --- |

Disclosure Controls and Procedures

Our principal executive officer and our principal financial officer have concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the Exchange Act)) were effective as of November 2, 2025, based on the evaluation of these controls and procedures required by Rule 13a-15(b) or 15d-15(b) of the Exchange Act.

Management’s Report on Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting. Our internal control system was designed to provide reasonable assurance regarding the preparation and fair presentation of published financial statements in accordance with U.S. generally accepted accounting principles.

All internal control systems, no matter how well designed, have inherent limitations. Therefore, even those systems determined to be effective can provide only reasonable assurance with respect to financial statement preparation and presentation in accordance with generally accepted accounting principles.

Management assessed the effectiveness of our internal control over financial reporting as of November 2, 2025, using the criteria set forth in Internal Control – Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on that assessment, management concluded that, as of November 2, 2025, our internal control over financial reporting was effective.

Our independent registered public accounting firm has issued an audit report on the effectiveness of our internal control over financial reporting. That report is included herein.

Changes in Internal Control Over Financial Reporting

During the fourth quarter of 2025, there were no changes that have materially affected or are reasonably likely to materially affect our internal control over financial reporting.

| --- | --- |

Director and Executive Officer Trading Arrangements

None.

| --- | --- |

Not applicable.

PART III

| --- | --- |

The information regarding directors required by this Item 10 will be set forth in the definitive proxy statement for our 2026 annual meeting of stockholders (proxy statement) to be filed with the Commission in advance of such meeting. Information regarding executive officers is presented in Item 1 of this report under the caption "Information about our Executive Officers."

We have adopted a code of ethics that applies to our executives, including our principal executive officer, principal financial officer, and principal accounting officer. This code of ethics and our corporate governance policies are posted on our website at http://www.deere.com/governance. We intend to satisfy disclosure requirements regarding amendments to or waivers from our code of ethics by posting such information on this website. The charters of the Audit Review, Corporate Governance, Compensation, and Finance committees of our Board are available on our website as well. This information is also available in print free of charge to any person who requests it.

| --- | --- |

The information required by this Item 11 will be set forth in the proxy statement to be filed with the Commission.

| --- | --- |

The information required by this Item 12 will be set forth in the proxy statement to be filed with the Commission.

| --- | --- |

The information required by this Item 13 will be set forth in the proxy statement to be filed with the Commission.

| --- | --- |

Information required by this Item 14, including aggregate fees billed to us by our principal accountant, Deloitte & Touche LLP (PCAOB ID No. 34), will be set forth in the proxy statement to be filed with the Commission.

​

PART IV

| --- | --- |

​	​	​
​	​	Page
(1)	Financial Statements	​
​	​	​
​	Statements of Consolidated Income for the years ended November 2, 2025, October 27, 2024, and October 29, 2023	47
​	​	​
​	Statements of Consolidated Comprehensive Income for the years ended November 2, 2025, October 27, 2024, and October 29, 2023	48
​	​	​
​	Consolidated Balance Sheets as of November 2, 2025 and October 27, 2024	49
​	​	​
​	Statements of Consolidated Cash Flows for the years ended November 2, 2025, October 27, 2024, and October 29, 2023	50
​	​	​
​	Statements of Changes in Consolidated Stockholders’ Equity for the years ended October 29, 2023, October 27, 2024, and November 2, 2025	51
​	​	​
​	Notes to Consolidated Financial Statements	52
​	​	​
(2)	Exhibits	​
​	​	​
​	See the “Index to Exhibits” on pages 87 – 89 of this report	​
​	​	​
​	Certain instruments relating to long-term borrowings constituting less than 10% of registrant’s total assets are not filed as exhibits herewith pursuant to Item 601(b)4(iii)(A) of Regulation S-K. The registrant agrees to file copies of such instruments upon request of the Commission.	​
​	​	​
​	Financial Statement Schedules Omitted	​
​	​	​
​	The following schedules for the Company and consolidated subsidiaries are omitted because of the absence of the conditions under which they are required: I, II, III, IV, and V.	​

​

​

​

​

None.

​

​

​

​

MANAGEMENT’S DISCUSSION AND ANALYSIS

Management’s Discussion and Analysis of Financial Condition and Results of Operations (MD&A) is intended to promote understanding of our financial condition and results of operations. The MD&A is provided as a supplement to, and should be read in conjunction with, the consolidated financial statements and the accompanying Notes to Consolidated Financial Statements. All amounts are presented in millions of U.S. dollars, unless otherwise specified. For comparison of 2024 to 2023 results, refer to the “Management’s Discussion and Analysis” section of our 2024 Form 10-K, which is hereby incorporated by reference.

​	​
OVERVIEW	​

Deere & Company is a global leader in the production of agricultural, turf, construction, and forestry equipment and solutions. John Deere Financial provides financing for John Deere equipment, parts, services, and other inputs customers need to run their operations. Our operations are managed through the Production & Precision Agriculture (PPA), Small Agriculture & Turf (SAT), Construction & Forestry (CF), and Financial Services (FS) operating segments. References to “equipment operations” include PPA, SAT, and CF, while references to “agriculture and turf” include both PPA and SAT.

Net Sales and Revenues by Segment in 2025

​

​	​
TRENDS & ECONOMIC CONDITIONS	​

Industry Sales Outlook for Fiscal 2026

Agriculture and Turf

​

Construction and Forestry

Company Trends

In 2022, we introduced our Leap Ambitions, a set of focused goals designed to guide the implementation of our Smart Industrial Operating Model. These Ambitions are built upon a foundation of product quality and manufacturing excellence, supported by a best-in-class dealer channel, and enabled by employees dedicated to solving some of the world’s most important problems. To build on our accomplishments and lay the foundation for sustained growth as we move toward 2030, in December 2025 we refined our Ambitions. Our refined Ambitions feature multi-year financial and operational goals, emphasizing the use of our differentiated equipment and service solutions, including automation, autonomy, digitalization, lifecycle solutions, and Solutions as a Service (SaaS).

Deeper integration of technology into equipment to enable customers to do more with less remains a persistent market trend. Customers seek to improve profitability, productivity, and sustainability by selecting our equipment and technology solutions. These technologies are incorporated into customer operations across the varied production systems in which we serve. While we continue to benefit from the adoption of these technologies, revenue from SaaS products did not represent a significant percentage of our revenues in 2025.

​

Company Outlook for 2026

	●	Large agriculture sales in North America are expected to remain subdued.

	●	Small agriculture & turf and construction & forestry sales are expected to improve in 2026.

Agriculture and Turf Outlook for 2026

	●	Demand in the U.S. and Canada for large agriculture equipment is expected to decrease further amidst challenging farm fundamentals for row crop farmers, which pressures short-term liquidity. Although the used equipment market is improving, it continues to constrain investments in new machines. These factors are partially offset by strong crop yields and consumption, recent U.S. trade agreements, growing demand for biofuels, and supportive government subsidies.

	●	We expect small agricultural and turf equipment sales to be flat to up slightly from 2025 levels in the U.S. and Canada. The dairy and livestock segment continues to generate profits driven by solid beef prices. A modest recovery is anticipated in the turf sector following an inflection in the housing market and growth in the overall economy.

	●	In Europe, the industry is forecasted to be flat to up slightly supported by strong dairy margins, a stabilizing interest rate environment, and improving crop yields.

	●	Demand in South America is expected to be flat. In Brazil, while soybean and corn acreage is expected to grow, demand is projected to be tempered by high interest rates, strong global crop yields weighing on prices, and uncertainty over global trade policies. In Argentina, equipment demand is anticipated to moderate after robust growth in 2025.

	●	Industry sales in Asia are forecasted to be down slightly.

Construction and Forestry Outlook for 2026

	●	Industry sales in the U.S. and Canada for earthmoving and compact construction equipment are projected to remain flat to slightly higher, supported by modest growth in construction markets. Record employment levels, strong construction backlogs, and U.S. government infrastructure spending continue to provide a solid foundation for the industry. Moreover, declining interest rates, increased investment in rental fleets, and surging data center construction starts are adding further momentum. These positive drivers are expected to be partially tempered by restrained investments in the private commercial sector.

	●	Global forestry markets are expected to be flat.

	●	Global roadbuilding markets are forecasted to remain flat at strong levels.

Financial Services Outlook for 2026

​	​	​	​	​	​	​	​
Net Income			​	Down			​
(-) Average portfolio			​	Unfavorable			​
(-) Prior period special items			​	Unfavorable			​
+ Financing spreads			​	Favorable			​

​

Additional Trends

Agricultural Market Business Cycle – The agricultural market is affected by various factors including commodity prices, acreage planted, crop yields, government policies, and uncertainty in macroeconomic trends. These factors affect farmers’ income and sentiment which may result in varying demand for our equipment. In 2025, we experienced the following effects due to unfavorable market conditions: lower sales volumes, greater reliance on sales incentives, and elevated receivable write-offs.

Global Trade Policies – During 2025, new tariffs were imposed in the U.S. for imports from a broad range of countries and on certain materials. Several countries also implemented or proposed retaliatory tariffs on imports from the U.S. and introduced additional trade barriers. Trade policies impact us in various ways. We are a net exporter of agriculture and turf equipment from the U.S. Nearly 80% of our domestic sales are assembled in the U.S., with the remaining products imported primarily from Europe, Mexico, India, and Japan. During 2025, incremental import tariffs adversely affected the cost of o

Showing the first 8K of 353K characters. Open the full section