Teradyne 2015 10-K Annual Report
TER · CIK 97210 · Form 10-K · Fiscal year ended December 31, 2015 · Filed February 29, 2016
Revenue fell 0.5% to $1.64 billion. Operating margin was 14.8%, against 5.9% the year before. Net income was $206 million.
21 sections, 409K characters. Original on sec.gov · ·
Risk FactorsBusinessMD&AFinancial StatementsWhat changed vs 2014
| Measure | Year ended Dec 31, 2015 | Year ended Dec 31, 2014 | Change |
|---|---|---|---|
| Revenue | $1.64B | $1.65B | -0.5% |
| Operating income | $243M | $96.4M | +152% |
| Net income | $206M | $81.3M | +154% |
| Diluted EPS | $0.97 | $0.37 | +162% |
| Cash and equivalents | $265M | $294M | -10.0% |
| Operating margin* | 14.8% | 5.9% | +9.0 pts |
From the XBRL facts tagged to this filing; both columns are as reported in this filing. * Computed by filings.tools: free cash flow is operating cash flow less capital spending; operating margin is operating income over revenue.
Cover and table of contents
10-K 1 d126262d10k.htm 10-K
Table of Contents
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
ANNUAL REPORT
PURSUANT TO SECTIONS 13 OR 15(d)
OF THE SECURITIES EXCHANGE ACT OF 1934
(MARK ONE)
| x | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
|---|
For the fiscal year ended December 31, 2015
OR
| ¨ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
|---|
Commission file number 001-06462
TERADYNE, INC.
(Exact Name of Registrant as Specified in Its Charter)
| MASSACHUSETTS | 04-2272148 | |
| (State or Other Jurisdiction of Incorporation or Organization) | (I.R.S. Employer Identification Number) |
| 600 RIVERPARK DRIVE NORTH READING, MASSACHUSETTS | 01864 | |
| (Address of Principal Executive Offices) | (Zip Code) |
Registrant’s telephone number, including area code: (978) 370-2700
Securities registered pursuant to Section 12(b) of the Act:
| Title of Each Class | Name of Each Exchange on Which Registered | |
| Common Stock, par value $0.125 per share | New York Stock Exchange |
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes x No ¨
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No x
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (229.405) is not contained herein, and will not be contained to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or in any amendment to this Form 10-K. ¨
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act (check one):
Large accelerated filer x Accelerated filer ¨ Non-accelerated filer ¨ Smaller reporting company ¨
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No x
The aggregate market value of the voting stock held by non-affiliates of the registrant as of July 2, 2015 was approximately $4.1 billion based upon the closing price of the registrant’s Common Stock on the New York Stock Exchange on that date.
The number of shares outstanding of the registrant’s only class of Common Stock as of February 22, 2016 was 204,336,493 shares.
DOCUMENTS INCORPORATED BY REFERENCE
Portions of the registrant’s proxy statement in connection with its 2016 annual meeting of shareholders are incorporated by reference into Part III of this Form 10-K.
Table of Contents
TERADYNE, INC.
INDEX
Table of Contents
TERADYNE, INC.
FORM 10-K
SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS
This Annual Report on Form 10-K contains “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995, Section 27A of the Securities Act and Section 21E of the Securities Exchange Act. When used herein, the words “will,” “would,” “believe,” “anticipate,” “plan,” “expect,” “estimate,” “project,” “intend,” “may,” “see,” “target” and other words and terms of similar meaning are intended to identify forward-looking statements although not all forward looking statements contain these identifying words. Forward looking statements involve risks and uncertainties, including, but not limited to, those discussed in the section entitled “Risk Factors” of this annual report on Form 10-K and elsewhere, and in other reports we file with the Securities and Exchange Commission. Readers are cautioned not to place undue reliance on these forward-looking statements which reflect management’s analysis only as of the date hereof and are subject to risks and uncertainties that could cause actual results to differ materially from those stated or implied. Teradyne assumes no obligation to update these forward-looking statements for any reason, except as may be required by law.
PART I
Item 1. Business
| --- | --- |
Teradyne, Inc. (“Teradyne”) was founded in 1960 and is a leading global supplier of automation equipment for test and industrial applications.
We design, develop, manufacture and sell automatic test systems used to test semiconductors, wireless products, data storage and complex electronics systems in the consumer electronics, wireless, automotive, industrial, computing, communications, and aerospace and defense industries. Our industrial automation products include collaborative robots used by global manufacturing and light industrial customers to improve quality and increase manufacturing efficiency. Our automatic test equipment and industrial automation products and services include:
| • | semiconductor test (“Semiconductor Test”) systems; |
|---|
| • | defense/aerospace (“Defense/Aerospace”) test instrumentation and systems, storage test (“Storage Test”) systems, and circuit-board test and inspection (“Production Board Test”) systems (collectively these products represent “System Test”); |
|---|
| • | wireless test (“Wireless Test”) systems; and |
|---|
| • | industrial automation (“Industrial Automation”) products. |
|---|
We have a broad customer base which includes integrated device manufacturers (“IDMs”), outsourced semiconductor assembly and test providers (“OSATs”), wafer foundries, fabless companies that design, but contract with others for the manufacture of integrated circuits (“ICs”), developers of wireless devices and consumer electronics, manufacturers of circuit boards, automotive suppliers, wireless product manufacturers, storage device manufacturers, aerospace and military contractors, and distributors that sell collaborative robots.
On June 11, 2015, we acquired Universal Robots A/S (“Universal Robots”) for approximately $284 million of cash plus up to an additional $65 million of cash if certain performance targets are met extending through 2018. Universal Robots is the leading supplier of collaborative robots which are low-cost, easy-to-deploy and simple-to-program robots that work side by side with production workers to improve quality and increase manufacturing efficiency. Universal Robots is a separate operating and reportable segment, Industrial Automation. The acquisition of Universal Robots provides a growth engine to our business and complements our
Table of Contents
existing System Test and Wireless Test segments. The total purchase price for Universal Robots was approximately $315 million.
In 2014, we acquired Avionics Interface Technologies LLC (“AIT”), a supplier of equipment for testing state-of-the-art data communication buses. The acquisition of AIT complements our Defense/Aerospace line of bus test instrumentation for commercial and defense avionics systems. AIT is included in our System Test segment. The total purchase price for AIT was approximately $21 million, which included cash paid of approximately $19 million and $2 million in fair value of contingent consideration payable upon achievement of revenue and gross margin targets in 2015 and 2016. No contingent consideration was paid for 2015. The maximum remaining contingent consideration that could be paid is $1.1 million.
In 2013, we acquired ZTEC Instruments Inc. (“ZTEC”), a supplier of modular wireless test instruments. The acquisition of ZTEC expands our Wireless Test segment into the design verification test of wireless components and chipsets. The total purchase price for ZTEC was approximately $17 million, which included cash paid of approximately $15 million and $2 million in fair value of contingent consideration payable upon achievement of certain customer order and revenue targets through 2015. None of the contingent consideration was paid.
In 2011, we acquired LitePoint Corporation (“LitePoint”) to expand our product portfolio of test equipment in the wireless test sector. LitePoint designs, develops, and supports advanced wireless test solutions for the manufacturing of wireless devices, including smart phones, tablets, notebooks, laptops, personal computer peripherals, and other Wi-Fi, Bluetooth and cellular enabled devices. The total purchase price for LitePoint was approximately $646 million. LitePoint and ZTEC represent our Wireless Test segment.
Investor Information
We are a Massachusetts corporation incorporated on September 23, 1960. We are subject to the informational requirements of the Securities Exchange Act of 1934 (“Exchange Act”). We file periodic reports, proxy statements and other information with the Securities and Exchange Commission (“SEC”). Such reports, proxy statements and other information may be obtained by visiting the Public Reference Room of the SEC at 100 F Street, N.E., Washington, DC 20549 or by calling the SEC at 1-800-SEC-0330. In addition, the SEC maintains an internet site (http://www.sec.gov) that contains reports, proxy and information statements and other information regarding issuers that file documents electronically.
You can access financial and other information, including the charters of our Audit Committee, Compensation Committee and Nominating and Corporate Governance Committee, our Corporate Governance Guidelines and Code of Conduct, by clicking the Investors link on our web site at www.teradyne.com. We make available, free of charge, copies of our filings with the SEC, including our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act through our web site as soon as reasonably practicable after filing such material electronically or otherwise furnishing it to the SEC.
Products
Semiconductor Test
We design, manufacture, sell and support Semiconductor Test products and services on a worldwide basis. The test systems we provide are used both for wafer level and device package testing. These chips are used in automotive, industrial, communications, consumer, and computer and electronic game applications, among others. Semiconductor devices span a broad range of functionality, from very simple low-cost devices such as appliance microcontrollers, operational amplifiers or voltage regulators to complex digital signal processors and microprocessors as well as memory devices. Semiconductor Test products and services are sold to IDMs that integrate the fabrication of silicon wafers into their business, “Fabless” companies that outsource the manufacturing of silicon wafers, “Foundries” that cater to the processing and manufacturing of silicon
Table of Contents
wafers, and OSATs that provide test and assembly services for the final packaged devices to both Fabless companies and IDMs. Fabless companies perform the design of integrated circuits without manufacturing capabilities, and use Foundries for wafer manufacturing and OSATs for test and assembly. These customers obtain the overall benefit of comprehensively testing devices and reducing the total costs associated with testing by using our Semiconductor Test systems to:
| • | improve and control product quality; |
|---|
| • | measure and improve product performance; |
|---|
| • | reduce time to market; and |
|---|
| • | increase production yields. |
|---|
Our FLEX Test Platform architecture advances our core technologies to produce test equipment that is designed for high efficiency multi-site testing. Multi-site testing involves the simultaneous testing of many devices in parallel. Leading semiconductor manufacturers are using multi-site testing to significantly improve their “Cost of Test” economics. The FLEX Test Platform architecture addresses customer requirements through the following key capabilities:
| • | A high efficiency multi-site architecture that reduces tester overhead such as instrument setup, synchronization and data movement, and signal processing; |
|---|
| • | The IG-XL™ software operating system which provides fast program development, including instant conversion from single to multi-site test; and |
|---|
| • | Broad technology coverage by instruments designed to cover the range of test parameters, coupled with a universal slot test head design that allows easy test system reconfiguration to address changing test needs. |
|---|
FLEX Test Platform purchases are being made by IDMs, OSATs, Foundries and Fabless customers. The FLEX Test Platform has become a widely used test solution at OSATs by providing versatile testers that can handle the widest range of devices, allowing OSATs to leverage their capital investments. The broad consumer, automotive and broadband markets have historically driven most of the device volume growth in the semiconductor industry. These markets include smart phones, cell phones, tablets, set top boxes, HDTVs, game controllers, computer graphics, and automotive controllers to name a few. These end use markets continue to be drivers for the FLEX Test Platform family of products because they require a wide range of technologies and instrument coverage. The UltraFLEX-M tester extends the FLEX Test Platform into the High Speed DRAM testing market. The FLEX Test Platform has an installed base of more than 4,700 systems.
Our J750™ test system shares the IG-XL software environment with the family of FLEX Test Platform systems. The J750 is designed to address the highest volume semiconductor devices, such as microcontrollers, that are central to the functionality of almost every consumer electronics product, from small appliances to automotive engine controllers. J750 test systems combine compact packaging, high throughput and ease of production test. We extended the J750 platform technology to create the IP750 Image Sensor™ test system. The IP750 is focused on testing image sensor devices used in smart phones and other imaging products. We have continued to invest in the J750 platform with new instrument releases that bring new capabilities to existing market segments and expand the J750 platform to new devices that include high end microcontrollers and the latest generation of cameras. In 2013, we introduced the J750 Ex-HD which includes system enhancements and new high density instruments that enable the J750 test platform to provide higher test cell productivity. The J750 platform has an installed base of over 4,800 systems.
Our Magnum platform addresses the requirements of mass production test of memory devices such as flash memory and DRAM. Flash and DRAM memory are widely used core building blocks in modern electronic products finding wide application in consumer, industrial, and computing equipment. Magnum V, the newest member of the family, is a next generation memory test solution designed for parallel memory test in the flash, DRAM and multi-chip package markets. The Magnum platform has an installed base of over 1,800 systems.
Table of Contents
Our ETS platform is used by semiconductor manufacturers and assembly and test subcontractors, primarily in the low pin count analog/mixed signal discrete markets that cover more cost sensitive applications. Our proprietary SmartPin™ technology enables high efficiency multi-site testing, on an individual test system, permitting greater test throughput. Semiconductors tested by ETS platform systems are incorporated into a wide range of products in historically high-growth markets, including mobile devices, video/multimedia products, automotive electronics, computer peripherals, and notebook and desktop computers. In 2013, we introduced the ETS-88, a high performance multi-site production test system designed to test a wide variety of high volume commodity and precision devices. In 2015, we introduced the ETS-800, a high performance multi-site production test system to test high complexity power devices in automotive, industrial and consumer applications. The ETS platform has an installed base of over 3,700 systems.
Wireless Test
Our acquisition of LitePoint in 2011 and ZTEC in 2013 expanded our product offerings in the wireless test market. LitePoint designs, develops, and supports advanced wireless test equipment for the manufacturing of wireless devices, including smart phones, tablets, notebooks, laptops, personal computer peripherals, and other Wi-Fi, Bluetooth, Near Field Communication (“NFC”) and cellular enabled devices. LitePoint collaborates with developers, chipset/component manufacturers, and manufacturing leaders to create agile systems designed to ensure the quality of wireless products manufactured in very large numbers. Using easy-to-deploy, innovative test methodologies, LitePoint’s IQ product line is designed for high-volume, low-cost production test, and falls into two test categories: cellular and connectivity. Our acquisition of ZTEC expanded our wireless product offerings into modular wireless test instruments for the design verification test of wireless components and chipsets.
Cellular
The IQxstream™ is a multi-DUT optimized solution for high-speed testing of GSM, EDGE, CDMA2000, TD-SCDMA, WCDMA, HSPA+, LTE-FDD, TD_LTE, and LTE-A technologies—used for calibration and verification of smartphones, tablets, small cell wireless gateways and embedded cellular modules. As the industry’s first “multi-DUT” test solution, IQxstream greatly increased production output through the implementation of parallel test methods of multiple devices. IQxstream is complemented by IQvector™, a turnkey production-optimized testing package that supports the leading cellular chipset solutions, which allows manufacturers to ramp volume production in a matter of weeks, rather than months. Drivers for IQxstream are found in the test software solutions provided by leading cellular chipset companies including Qualcomm, Intel, MediaTek, Spreadtrum, Marvell and others.
Connectivity
We offer a comprehensive range of test equipment for multi-DUT connectivity testing. The IQxel™ family enables calibration and verification of the latest Wi-Fi standard 802.11ac taking wireless data rates beyond the gigabit per second barrier. The IQxel family supports multiple bandwidth and channel configurations, MIMO antenna arrangements, Bluetooth™ Classic and Low Energy, and covers the full range of communication standards. These solutions target manufacturers of networking equipment, Internet access devices, Internet of Things (IoT) products and embedded modules used in smartphones, tablets, and PCs. We were the first to introduce a production focused parametric test solution for NFC technology with our IQnfc™ addressing the growing use of NFC technology for mobile payments with smartphones.
To complement the IQ family of connectivity testers, we offer IQfact+™ a turnkey, chipset-optimized, customizable software library covering over 300 wireless IC solutions, enabling the rapid development of volume manufacturing solutions with a minimum of engineering effort by our customers. Similar to our cellular products, drivers for our connectivity products are found in the test software solutions from Broadcom, Qualcomm, Marvell, MediaTek and others.
Table of Contents
Design Verification Test
We offer the zSeries of modular wireless test instruments for the design verification test of wireless components and chipsets. The lab-in-a-box zSeries solution provides simple and fast design verification of RF power amplifier and smart device RF front end modules. It is capable of rapid analysis of the latest digital pre-distortion and envelope tracking technologies for both LTE and WiFi standards.
System Test
Our System Test segment is comprised of three business units: Defense/Aerospace, Storage Test and Production Board Test.
Defense/Aerospace
We are a leading provider of high-performance test systems, subsystems, instruments and service for the defense and aerospace markets. Our test products are used to ensure the readiness of military and commercial aerospace electronics systems. New programs, such as tactical aircraft and missile systems, as well as upgrade programs, continue to fuel the demand for high performance test systems in this market. Our test products are well-suited to the demands of defense/aerospace electronics manufacturers and repair depots worldwide. Our leadership in this market is underscored by our success with major Department of Defense programs across all U.S. military service branches and many allied defense services worldwide. Our acquisition of AIT in 2014 complements our line of bus test instrumentation for commercial and defense avionics systems. AIT is a supplier of equipment for testing state-of-the-art data communication buses.
Storage Test
The Storage Test business unit addresses the high throughput, automated manufacturing test requirements of hard disk drive (“HDD”) and solid state disk (“SSD”) manufacturers. Our products address the client and enterprise storage markets. The client market is driven by the needs of desktop, laptop, and external HDD and SSD storage products. The enterprise market is driven by the needs of data centers and cloud storage. Our products lead in addressing customer requirements related to factory density, throughput, thermal performance and vibration isolation.
Production Board Test
Our test systems are used by electronics manufacturers worldwide to perform In-Circuit-Test (“ICT”) and device programming of printed circuit board assemblies. Fast, accurate and cost-effective test capabilities are hallmark features of our Test Station and Spectrum ICT product families. We offer the Test Station in off-line and automated in-line configurations. The automated in-line configurations address the growing requirements for automating production lines for high volume applications, such as automotive electronics.
Industrial Automation
Universal Robots, which we acquired in June 2015, is the leading supplier of collaborative robots, which are low-cost, easy-to-deploy and simple-to-program robots that work side by side with production workers to improve quality, increase manufacturing efficiency and decrease manufacturing costs. Collaborative robots are designed to mimic the motion of a human arm and can be fitted with task specific grippers or fixtures to support a wide range of applications. Universal Robots offers three collaborative robot models, the UR3, UR5, and UR10, each with different weight carrying capacity and arm reach. All models are easily integrated into existing production environments. Universal Robots’ products are differentiated by their:
| • | easy programming using a graphical interface which allows users to program the collaborative robot in a few hours; |
|---|
Table of Contents
| • | flexibility and ease of use in allowing customers to change the task the collaborative robot is performing as their production demands dictate; |
|---|
| • | safe operations as the collaborative robots can assist workers in side by side production environments requiring no special safety enclosures or shielding to protect workers; and |
|---|
| • | short payback period, on average less than 12 months. |
|---|
Cumulatively, Universal Robots has sold over 6,500 collaborative robots in diverse production environments and applications.
Summary of Revenues by Reportable Segment
Our four reportable segments accounted for the following percentages of consolidated revenues for each of the last three years:
| 2015 | 2014 | 2013 | ||||||||||
| Semiconductor Test | 73 | % | 79 | % | 71 | % | ||||||
| System Test | 13 | 10 | 11 | |||||||||
| Wireless Test | 11 | 11 | 18 | |||||||||
| Industrial Automation | 3 | — | — | |||||||||
| 100 | % | 100 | % | 100 | % | |||||||
Sales and Distribution
In 2015, revenues from JA Mitsui Leasing, Ltd. accounted for 13% of our consolidated revenues. JA Mitsui Leasing, Ltd. is a customer of our Semiconductor Test segment. In 2014, no single customer accounted for more than 10% of our consolidated revenues. In 2013, revenues from Apple Inc. accounted for 12% of our consolidated revenues. In 2013, Apple Inc. was a customer of our Semiconductor Test and Wireless Test segments. In each of the years, 2015, 2014 and 2013, our three largest customers in aggregate accounted for 25%, 21% and 26% of our consolidated revenues, respectively. OSAT customers often purchase our test systems based upon recommendations from IDMs and Fabless companies. In all cases when an OSAT customer purchases a test system from us, we consider the OSAT as the customer since credit risk, title and risk of loss, among other things, are between Teradyne and the OSAT.
Direct sales to United States government agencies accounted for 1%, 2% and 3% of our consolidated revenues in 2015, 2014 and 2013, respectively. Approximately 7%, 20% and 32% of System Test’s revenues in 2015, 2014 and 2013, respectively, were to United States government agencies and 26%, 23% and 24% of System Test’s revenues in 2015, 2014 and 2013, respectively, were to government contractor customers.
We have sales and service offices located throughout North America, Asia and Europe. We sell in these areas predominantly through a direct sales force. Our manufacturing activities are primarily conducted through subcontractors and outsourced contract manufacturers with a significant operation concentrated in China.
Sales to customers outside the United States were 87%, 87% and 84% of our consolidated revenues in 2015, 2014 and 2013, respectively. Sales are attributed to geographic areas based on the location of the customer site.
Sales to customers by country outside of the United States that accounted for 10% or more of our consolidated revenues in any of the previous three years were as follows:
| 2015 | 2014 | 2013 | ||||||||||
| Taiwan | 27 | % | 30 | % | 19 | % | ||||||
| China | 16 | 18 | 23 |
Table of Contents
See also “Item 1A: Risk Factors” and Note Q: “Operating Segment, Geographic and Significant Customer Information” in Notes to Consolidated Financial Statements.
Competition
We face significant competition throughout the world in each of our reportable segments. Competitors in the Semiconductor Test segment include, among others, Advantest Corporation and Xcerra Corporation.
Competitors in the System Test segment include, among others, Keysight Technologies, Inc. (formerly Agilent Technologies), Astronics, Test Research Inc. and SPEA S.p.A.
Competitors in our Wireless Test segment include, among others, Rohde & Schwarz GmbH & Co. KG, Anritsu Company, Keysight Technologies, Inc., Cobham/Aeroflex, Inc. and National Instruments Corporation.
Competitors in our Industrial Automation segment include manufacturers of traditional industrial robots such as KUKA Robotics Corporation, ABB, FANUC and Yaskawa Electric Corporation as well as emerging companies developing collaborative robots.
Some of our competitors have substantially greater financial and other resources to pursue engineering, manufacturing, marketing and distribution of their products. We also face competition from emerging Asian equipment companies and from internal suppliers at several of our customers. Some of our competitors have introduced or announced new products with certain performance characteristics which may be considered equal or superior to those we currently offer. We expect our competitors to continue to improve the performance of their current products and to introduce new products or new technologies that provide improved cost of ownership and performance characteristics. See also “Item 1A: Risk Factors.”
Backlog
At December 31, 2015 and 2014, our backlog of unfilled orders in our four reportable segments was as follows:
| 2015 | 2014 | |||||||
| (in millions) | ||||||||
| Semiconductor Test | $ | 472.9 | $ | 262.8 | ||||
| System Test | 108.8 | 96.1 | ||||||
| Wireless Test | 33.4 | 37.0 | ||||||
| Industrial Automation | 0.6 | — | ||||||
| $ | 615.7 | $ | 395.9 | |||||
Of the backlog at December 31, 2015, approximately 99% of the Semiconductor Test backlog, 93% of System Test backlog, 46% of Wireless Test backlog and 100% of the Industrial Automation backlog, is expected to be delivered in 2016.
Customers may delay delivery of products or cancel orders suddenly and without advanced notice, subject to possible cancellation penalties. Due to possible customer changes in delivery schedules and cancellation of orders, our backlog at any particular date is not necessarily indicative of the actual sales for any succeeding period. Delays in delivery schedules or cancellations of backlog during any particular period could have a material adverse effect on our business, financial condition or results of operations.
Raw Materials
Our products contain electronic and mechanical components that are provided by a wide range of suppliers. Some of these components are standard products, while others are manufactured to our specifications. We can
Table of Contents
experience occasional delays in obtaining timely delivery of certain items. While the majority of our components are available from multiple suppliers, certain items are obtained from sole sources. We may experience a temporary adverse impact if any of our sole source suppliers delay or cease to deliver products.
Intellectual Property and Licenses
The development of our products, both hardware and software, is based in significant part on proprietary information, our brands and technology. We protect our rights in proprietary information, brands and technology through various methods, such as:
| • | patents; |
|---|
| • | copyrights; |
|---|
| • | trademarks; |
|---|
| • | trade secrets; |
|---|
| • | standards of business conduct and related business practices; and |
|---|
| • | technology license agreements, software license agreements, non-disclosure agreements, employment agreements, and other agreements. |
|---|
However, these protections might not be effective in all circumstances. Competitors might independently develop similar technology or exploit our proprietary information and our brands in countries where we lack enforceable intellectual property rights or where enforcement of such rights through the legal system provides an insufficient deterrent. Also, intellectual property protections can lapse or be invalidated through appropriate legal processes. We do not believe that any single piece of intellectual property or proprietary rights is essential to our business.
Employees
As of December 31, 2015, we employed approximately 4,100 people. Since the inception of our business, we have experienced no work stoppages or other labor disturbances.
Engineering and Development Activities
The highly technical nature of our products requires a large and continuing engineering and development effort. For the years ended December 31, 2015, 2014 and 2013, our engineering and development expenditures were $292.3 million, $291.6 million, and $264.1 million, respectively. These expenditures accounted for approximately 17.8%, 17.7%, and 18.5%, of our consolidated revenues in 2015, 2014, and 2013, respectively.
Environmental Affairs
We are subject to various federal, state, and local government laws and regulations relating to the protection of employee health and safety and the environment. We accrue for all known environmental liabilities when it becomes probable that we will incur cleanup costs and those costs can reasonably be estimated. Estimated environmental costs are not expected to materially affect the financial position or results of our operations in future periods. However, estimates of future costs are subject to change due to protracted cleanup periods and changing environmental remediation laws and regulations.
Table of Contents
OUR EXECUTIVE OFFICERS
Pursuant to General Instruction G(3) of Form 10-K, the following table is included in Part I of this Annual Report on Form 10-K in lieu of being included in the Proxy Statement for the Annual Meeting of Shareholders. The table sets forth the names of all of our executive officers and certain other information relating to their positions held with Teradyne and other business experience. Our executive officers do not have a specific term of office but rather serve at the discretion of the Board of Directors.
| Executive Officer | Age | Position | Business Experience For The Past 5 Years | |||||
| Mark E. Jagiela | 55 | Chief Executive Officer and President | Chief Executive Officer since February 2014; President of Teradyne since January 2013; President of Semiconductor Test from 2003 to February 2016; Vice President of Teradyne from 2001 to 2013. | |||||
| Gregory R. Beecher | 58 | Vice President, Chief Financial Officer and Treasurer | Vice President and Chief Financial Officer of Teradyne since 2001; Treasurer of Teradyne from 2003 to 2005 and since 2006. | |||||
| Charles J. Gray | 54 | Vice President, General Counsel and Secretary | Vice President, General Counsel and Secretary of Teradyne since April 2009. | |||||
| Bradford B. Robbins | 57 | President of Wireless Test | President of Wireless Test since August 2014; Chief Operating Officer of LitePoint Corporation from 2012 to 2014; Vice President of Teradyne since 2001. | |||||
| Gregory S. Smith | 52 | President of Semiconductor Test | President of Semiconductor Test since February 2016; Vice President, SOC Business Group and Marketing Manager for Semiconductor Test Group from January 2014 to February 2016; Business Unit Manager, Complex SOC Business Unit from 2009 to January 2014. | |||||
| Walter G. Vahey | 51 | President of System Test | President of System Test since July 2012; Vice President of Teradyne since 2008; General Manager of Storage Test since 2008; General Manager of Production Board Test since April 2013; General Manager of Defense/Aerospace from 2004 to July 2012. |
Item 1A. Risk Factors
| --- | --- |
Risks Associated with Our Business
The risks described below are not the only risks that we face. Additional risks and uncertainties not currently known to us or that we currently deem to be immaterial also may materially adversely affect our business, financial condition and/or operating results.
Our business is impacted by global and industry-specific economic cycles, which are difficult to predict, and actions we have taken or may take to offset these cycles may not be sufficient.
Capital equipment providers in the electronics and semiconductor industries, such as Teradyne, have, in the past, been negatively impacted by both sudden slowdowns in the global economies and recurring cyclicality within those industries. These cycles have resulted in periods of over-supply; a trend we believe will continue to
Table of Contents
occur for newer generations of electronic products. Our business and results of operations depend, in significant part, upon capital expenditures of manufacturers of semiconductors and other electronics, which in turn depend upon the current and anticipated market demand for those products. Disruption or deterioration in economic conditions may reduce customer purchases of our products, thereby reducing our revenues and earnings. In addition, such adverse changes in economic conditions, and resulting slowdowns in the market for our products, may, among other things, result in increased price competition for our products, increased risk of excess and obsolete inventories, increased risk in the collectability of our accounts receivable from our customers, potential reserves for doubtful accounts and write-offs of accounts receivable, increased risk of restructuring charges, and higher operating costs as a percentage of revenues, which, in each case and together, adversely affect our operating results. We are unable to predict the likely duration, frequency and severity of disruptions in financial markets, credit availability, and adverse economic conditions throughout the world, and we cannot ensure that the level of revenues or new orders for a fiscal quarter will be sustained in subsequent quarters. We have taken actions to address the effects of general economic variability and recurring industry cyclicality, including implementing cost control and reduction measures. If our businesses experience further downturns, whether due to a deterioration in global economic conditions or slowdowns in specific markets we serve, we may need to take further cost control and reduction measures. We cannot predict whether these measures will be sufficient to offset global or market-specific disruptions that might affect our test businesses.
We are subject to intense competition.
We face significant competition throughout the world in each of our reportable segments. Some of our competitors have substantial financial and other resources to pursue engineering, manufacturing, marketing and distribution of their products. We also face competition from emerging Asian equipment companies and internal development at several of our customers. Some of our competitors have introduced or announced new products with certain performance characteristics which may be considered equal or superior to those we currently offer. We expect our competitors to continue to improve the performance of their current products and to introduce new products or new technologies that provide improved cost of ownership and performance characteristics. New product introductions by competitors could cause a decline in revenues or loss of market acceptance of our products.
The market for our products is concentrated, and our business depends, in part, on obtaining orders from a few significant customers.
The market for our products is concentrated with a limited number of significant customers accounting for a substantial portion of the purchases of test equipment. In each of the years 2015, 2014 and 2013, our three largest customers in aggregate accounted for 25%, 21% and 26% of consolidated revenues, respectively. In any one reporting period, a single customer or several customers may contribute even a larger percentage of our consolidated revenues. In addition, our ability to increase sales will depend, in part, on our ability to obtain orders from current or new significant customers. The opportunities to obtain orders from these customers may be limited, which may impair our ability to grow revenues. We expect that sales of our products will continue to be concentrated with a limited number of significant customers for the foreseeable future. The loss of a significant customer or any reduction in orders by these customers, including reductions due to market or competitive conditions, would likely have a material adverse effect on our business, financial condition or results of operations.
Failure to realize the estimated sales value of equipment leased to our customers may adversely affect our results of operations.
We occasionally lease equipment to our customers, typically for a term of one year. The cost of the leased equipment is recorded as an asset on our balance sheet and depreciated over an estimated useful life of approximately four years. Realization of the leased equipment’s value depends on numerous factors including: the technological obsolescence of the leased equipment; elections by customers to terminate a lease prior to
Table of Contents
scheduled termination; the general market conditions at the time of expiration of the lease; the customer’s election to renew the lease; and the cost of comparable new equipment. Our inability to realize the value of leased equipment could cause a decrease in revenues and an increase in asset write-offs which would in each case reduce our operating income.
Our operating results are likely to fluctuate significantly.
Our operating results are affected by a wide variety of factors that could materially adversely affect revenues or profitability. The following factors could impact future operations:
| • | a worldwide economic slowdown or disruption in the global financial markets; |
|---|
| • | competitive pressures on selling prices; |
|---|
| • | our ability to introduce, and the market acceptance of, new products; |
|---|
| • | changes in product revenues mix resulting from changes in customer demand; |
|---|
| • | the level of orders received which can be shipped in a quarter because of the tendency of customers to wait until late in a quarter to commit to purchase due to capital expenditure approvals and constraints occurring at the end of a quarter, or the hope of obtaining more favorable pricing from a competitor seeking the business; |
|---|
| • | engineering and development investments relating to new product introductions, and the expansion of manufacturing, outsourcing and engineering operations in Asia; |
|---|
| • | provisions for excess and obsolete inventory relating to the lack of demand for and the discontinuance of products; |
|---|
| • | impairment charges for certain long-lived and intangible assets and goodwill; |
|---|
| • | an increase in the leasing of our products to customers; |
|---|
| • | our ability to expand our global distribution channel for our collaborative robots; |
|---|
| • | parallel or multi-site testing could lead to a decrease in the ultimate size of the market for our products; and |
|---|
| • | the ability of our suppliers and subcontractors to meet product quality or delivery requirements needed to satisfy customer orders for our products, especially if product demand increases. |
|---|
As a result of the foregoing and other factors, we have experienced and may continue to experience material fluctuations in future operating results on a quarterly or annual basis which could materially and adversely affect our business, financial condition, operating results or stock price.
We are subject to risks of operating internationally.
A significant portion of our total revenues is derived from customers outside the United States. Our international sales and operations are subject to significant risks and difficulties, including:
| • | unexpected changes in legal and regulatory requirements affecting international markets; |
|---|
| • | changes in tariffs and exchange rates; |
|---|
| • | social, political and economic instability, acts of terrorism and international conflicts; |
|---|
| • | difficulties in protecting intellectual property; |
|---|
| • | difficulties in accounts receivable collection; |
|---|
| • | cultural differences in the conduct of business; |
|---|
Table of Contents
| • | difficulties in staffing and managing international operations; |
|---|
| • | compliance with customs regulations; and |
|---|
| • | compliance with international tax laws and regulations. |
|---|
In addition, an increasing portion of our products and the products we purchase from our suppliers are sourced or manufactured in foreign locations, including China, and a large portion of the devices our products test are fabricated and tested by foundries and subcontractors in Taiwan, China, Singapore and other parts of Asia. As a result, we are subject to a number of economic and other risks, particularly during times of political or financial instability in these regions. Disruption of manufacturing or supply sources in these international locations could materially adversely impact our ability to fill customer orders and potentially result in lost business.
If we fail to develop new technologies to adapt to our customers’ needs and if our customers fail to accept our new products, our revenues will be adversely affected.
We believe that our technological position depends primarily on the technical competence and creative ability of our engineers. In a rapidly evolving market, such as ours, the development or acquisition of new technologies, commercialization of those technologies into products and market acceptance and customer demand for those products are critical to our success. Successful product development or acquisition, introduction and acceptance depend upon a number of factors, including:
| • | new product selection; |
|---|
| • | ability to meet customer requirements; |
|---|
| • | development of competitive products by competitors; |
|---|
| • | timely and efficient completion of product design; |
|---|
| • | timely and efficient implementation of manufacturing and manufacturing processes; |
|---|
| • | timely remediation of product performance issues, if any, identified during testing; |
|---|
| • | assembly processes and product performance at customer locations; |
|---|
| • | differentiation of our products from our competitors’ products; |
|---|
| • | management of customer expectations concerning product capabilities and product life cycles; |
|---|
| • | ability to attract and retain technical talent; and |
|---|
| • | innovation that does not infringe on the intellectual property rights of third parties. |
|---|
If our suppliers do not meet product or delivery requirements, we could have reduced revenues and earnings.
Certain components, including semiconductor chips, may be in short supply from time to time because of high industry demand or the inability of some vendors to consistently meet our quality or delivery requirements. Approximately 25% of material purchases require some custom work where having multiple suppliers would be cost prohibitive. If any of our suppliers were to cancel contracts or commitments or fail to meet the quality or delivery requirements needed to satisfy customer orders for our products, we could lose time-sensitive customer orders, have significantly decreased revenues and earnings and be subject to contractual penalties, which would have a material adverse effect on our business, results of operations and financial condition. In addition, we rely on contract manufacturers for certain subsystems used in our products, and our ability to meet customer orders for those products depends upon the timeliness and quality of the work performed by these subcontractors, over whom we do not exercise any control.
To a certain extent, we are dependent upon the ability of our suppliers and contractors to help meet increased product or delivery requirements. It may be difficult for certain suppliers to meet delivery requirements in a period of rapid growth, therefore impacting our ability to meet our customers’ demands.
Table of Contents
We rely on the financial strength of our suppliers. There can be no assurance that the loss of suppliers either as a result of financial viability, bankruptcy or otherwise will not have a material adverse effect on our business, results of operations or financial condition.
Our operations may be adversely impacted if our outsourced contract manufacturers or service providers fail to perform****.
We depend on Flextronics International Ltd. (“Flextronics”) to manufacture and test our FLEX and J750 family of products from its facility in China and on other contract manufacturers to manufacture other products. If for any reason these contract manufacturers cannot provide us with these products in a timely fashion, or at all, we may not be able to sell these products to our customers until we enter a similar arrangement with an alternative contract manufacturer. If we experience a problem with our supply of products from Flextronics or our other contract manufacturers, it may take us significant time to either manufacture the product or find an alternate contract manufacturer, which could result in substantial expense and disruption to our business.
We have also outsourced a number of our general and administrative functions, including information technology, to reputable service providers, many of which are in foreign countries, sometimes impacting communication with them because of language and time differences. Their presence in foreign countries also increases the risk they could be exposed to political risk. Additionally, there may be difficulties encountered in coordinating the outsourced operations with existing functions and operations. If we fail in successfully coordinating and managing the outsourced service providers, it may cause an adverse effect on our operations which could have a material adverse effect on our business, results of operations or financial condition.
We may not fully realize the benefits of our acquisitions or strategic alliances.
In June 2015, we acquired Universal Robots. We may not be able to realize the benefit of acquiring Universal Robots or successfully grow Universal Robots’ business. We may continue to acquire additional businesses, form strategic alliances or create joint ventures with third parties that we believe will complement or augment our existing businesses. We may not be able to realize the expected synergies and cost savings from the integration with our existing operations of other businesses or technologies that we may acquire. In addition, the integration process for our acquisitions may be complex, costly and time consuming and include unanticipated issues, expenses and liabilities. We may have difficulty in developing, manufacturing and marketing the products of a newly acquired company in a manner that enhances the performance of our combined businesses or product lines and allows us to realize value from expected synergies. Following an acquisition, we may not achieve the revenue or net income levels that justify the acquisition. Acquisitions may also result in one-time charges (such as acquisition-related expenses, write-offs or restructuring charges) or in the future, impairment of goodwill, that adversely affect our operating results. Additionally, we may fund acquisitions of new businesses, strategic alliances or joint ventures by utilizing our cash, incurring debt, issuing shares of our common stock, or by other means.
In the fourth quarter of 2014, we performed our annual goodwill impairment test and recorded a goodwill impairment charge of $98.9 million in our Wireless Test segment as a result of decreased projected demand attributable to an estimated smaller future wireless test market due to reuse of wireless test equipment, price competition and different testing techniques. Further reductions in the size of the wireless test market may occur, which may result in additional goodwill impairment charges, increased risk of excess and obsolete inventories, asset write-offs and restructuring charges.
We may incur significant liabilities if we fail to comply with environmental regulations.
We are subject to both domestic and international environmental regulations and statutory strict liability relating to the use, storage, discharge, site cleanup and disposal of hazardous chemicals used in our manufacturing processes. If we fail to comply with present and future regulations, or are required to perform site
Table of Contents
remediation, we could be subject to future liabilities or cost, including penalties or the suspension of production. Present and future regulations may also:
| • | restrict our ability to expand facilities; |
|---|
| • | restrict our ability to ship certain products; |
|---|
| • | require us to modify our operations logistics; |
|---|
| • | require us to acquire costly equipment; or |
|---|
| • | require us to incur other significant costs and expenses. |
|---|
Pursuant to present regulations and agreements, we are conducting groundwater and subsurface assessment and monitoring and are implementing remediation and corrective action plans for facilities located in Massachusetts and New Hampshire which are no longer conducting manufacturing operations. As of December 31, 2015, we have not incurred material costs as result of the monitoring and remediation steps taken at the Massachusetts and New Hampshire sites.
On January 27, 2003, the European Union adopted the following directives: (i) the directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (the “RoHS Directive”); and (ii) the directive on Waste Electrical and Electronic Equipment (the “WEEE Directive”). The WEEE Directive became effective August 13, 2005 and the RoHS Directive became effective on July 6, 2006. Both the RoHS Directive and the WEEE Directive alter the form and manner in which electronic equipment is imported, sold and handled in the European Union. Other jurisdictions, such as China, have followed the European Union’s lead in enacting legislation with respect to hazardous substances and waste removal. Ensuring compliance with the RoHS Directive, the WEEE Directive and similar legislation in other jurisdictions, and integrating compliance activities with our suppliers and customers could result in additional costs and disruption to operations and logistics and thus, could have a negative impact on our business, operations or financial condition.
We currently are, and in the future may be, subject to litigation or regulatory proceedings that could have an adverse effect on our business.
From time to time, we may be subject to litigation or other administrative, regulatory or governmental proceedings, including tax audits and resulting claims that could require significant management time and resources and cause us to incur expenses and, in the event of an adverse decision, pay damages or incur costs in an amount that could have a material adverse effect on our financial position or results of operations.
Third parties may claim we are infringing their intellectual property and we could suffer significant litigation costs, licensing expenses or be prevented from selling our products.
We have been sued for patent infringement in the past and receive notifications from time to time that we may be in violation of patents held by others. An assertion of patent infringement against us, if successful, could have a material adverse effect on our ability to sell our products or it could force us to seek a license to the intellectual property rights of others or alter such products so that they no longer infringe the intellectual property rights of others. A license could be very expensive to obtain or may not be available at all. Similarly, changing our products or processes to avoid infringing the rights of others may be costly or impractical. Additionally, patent litigation could require a significant use of management resources and involve a lengthy and expensive defense, even if we eventually prevail. If we do not prevail, we might be forced to pay significant damages, obtain licenses, modify our products, or stop making our products; each of which could have a material adverse effect on our financial condition, operating results or cash flows.
Table of Contents
If we are unable to protect our intellectual property (“IP”), we may lose a valuable asset or may incur costly litigation to protect our rights.
We protect the technology that is incorporated in our products in several ways, including through patent, copyright, trademark and trade secret protection and by contractual agreement. However, even with these protections, our IP may still be challenged, invalidated or subject to other infringement actions. While we believe that our IP has value in the aggregate, no single element of our IP is in itself essential. If a significant portion of our IP is invalidated or ineffective, our business could be materially adversely affected.
We may incur higher tax rates than we expect and may have exposure to additional international tax liabilities and costs.
We are subject to paying income taxes in the United States and various other countries where we operate. Our effective tax rate is dependent on where our earnings are generated and the tax regulations and the interpretation and judgment of administrative tax or revenue entities in the United States and other countries. We have pursued a global tax strategy which could adversely be affected by the mix of earnings and tax rates in the countries where we operate, changes to tax laws or an adverse tax ruling by administrative entities. We are also subject to tax audits in the countries where we operate. Any material assessment resulting from an audit from an administrative tax or revenue entity could also negatively affect our financial results.
As a multinational corporation, we are subject to income taxes as well as non-income based taxes, in both the United States and various foreign jurisdictions. In certain foreign jurisdictions, we qualify for tax incentives and tax holidays based on our ability to meet, on a continuing basis, various tests relating to our employment levels, research and development expenditures and other qualification requirements in a particular foreign jurisdiction. While we intend to operate in such a manner to maintain and maximize our tax incentives, no assurance can be given that we have so qualified or that we will so qualify for any particular year or jurisdiction. If we fail to qualify and to remain qualified for certain foreign tax incentives and tax holidays, we may be subject to further taxation or an increase in our effective tax rate which would adversely impact our financial results. In December 2015, Teradyne entered into an agreement with the Singapore Economic Development Board which extended our Singapore tax holiday under substantially similar terms to the agreement which expired on December 31, 2015. The new tax holiday is scheduled to expire on December 31, 2020. The tax savings attributable to the Singapore tax holiday for the years ended December 31, 2015, 2014 and 2013 were $11.5 million or $0.05 per diluted share, $13.2 million or $0.06 per diluted share and $4.7 million or $0.02 per diluted share, respectively.
In addition, we may incur additional costs, including headcount expenses, in order to maintain or obtain a foreign tax incentive in a particular foreign jurisdiction.
We have significant guarantees, indemnification and customer confidentiality obligations.
From time to time, we make guarantees to customers regarding the delivery, price and performance of our products and guarantee certain indebtedness, performance obligations or lease commitments of our subsidiary and affiliate companies. We also have agreed to provide indemnification to our officers, directors, employees and agents, to the extent permitted by law, arising from certain events or occurrences while the officer, director, employee or agent, is or was serving at our request in such capacity. Additionally, we have confidentiality obligations to certain customers and if breached would require the payment of significant penalties. If we become liable under any of these obligations, it could materially and adversely affect our business, financial condition or operating results. For additional information see Note J: “Commitments and Contingencies—Guarantees and Indemnification Obligations” in Notes to Consolidated Financial Statements.
We may discontinue or reduce our quarterly cash dividend or share repurchase program.
In January 2014, our Board of Directors initiated a quarterly dividend of $0.06 per share. In January 2015, our Board of Directors authorized Teradyne to repurchase up to $500 million of common stock. In 2015, we
Table of Contents
repurchased $300 million of common stock. In 2016, we intend to repurchase between $100 million and $200 million of common stock. Holders of our common stock are only entitled to receive dividends when and if they are declared by our Board of Directors. Future cash dividends and share repurchases are subject to the discretion of our Board of Directors and will depend, among other things, upon our earnings, capital requirements and financial condition. While we have declared a quarterly cash dividend on our common stock and authorized a share repurchase program, we are not required to do either and may reduce or eliminate our cash dividend or share repurchase program in the future. The reduction or elimination of our cash dividend or our share repurchase program could adversely affect the market price of our common stock.
We may incur indebtedness.
On April 27, 2015, we entered into a five-year, senior secured revolving credit facility of up to $350 million. Subject to customary conditions, we may seek to obtain from existing or new lenders incremental commitments under the credit facility in an aggregate principal amount not to exceed $150 million. We have not borrowed any funds under this credit facility. We could borrow funds under this credit facility at any time for general corporate purposes and working capital. Incurring indebtedness, among other things, could:
| • | make it difficult to pay other obligations; |
|---|
| • | make it difficult to obtain any necessary future financing for working capital, capital expenditures, debt service requirements or other purposes; |
|---|
| • | require the dedication of a substantial portion of any cash flow from operations to service our indebtedness, thereby reducing the amount of cash flow available for other purposes, including capital expenditures; and |
|---|
| • | limit our flexibility in planning for, or reacting to, changes in our business and the markets in which we compete. |
|---|
Restrictive covenants in the agreement governing our senior secured revolving credit facility may restrict our ability to pursue business strategies.
The agreement governing our senior secured revolving credit facility limits our ability, among other things, to: incur additional secured indebtedness; sell, transfer, license or dispose of assets; consolidate or merge; enter into transactions with our affiliates; and incur liens. In addition, our senior secured revolving credit facility contains financial and other restrictive covenants that limit our ability to engage in activities that may be in our long term best interest, such as, subject to permitted exceptions, making capital expenditures in excess of certain thresholds, making investments, loans and other advances, and prepaying any additional indebtedness while our indebtedness under our senior secured revolving credit facility is outstanding. Our failure to comply with financial and other restrictive covenants could result in an event of default, which if not cured or waived, could result in the lenders requiring immediate payment of all outstanding borrowings or foreclosing on collateral pledged to them to secure the indebtedness.
Our business may suffer if we are unable to attract and retain key employees.
Competition for employees with skills we require is intense in the high technology industry. Our success will depend on our ability to attract and retain key technical employees. The loss of one or more key or other employees, a decrease in our ability to attract additional qualified employees, or the delay in hiring key personnel could each have a material adverse effect on our business, results of operations or financial condition.
New regulations related to conflict minerals may adversely affect us.
The Dodd-Frank Wall Street Reform and Consumer Protection Act imposes new disclosure requirements regarding the use of “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries
Table of Contents
in our products, whether or not these products are manufactured by third parties. This requirement could affect the pricing, sourcing and availability of minerals used in the manufacture of components we use in our products. In addition, there are additional costs associated with complying with the disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex and we may be unable to verify the origins for all minerals used in our products. As a result, we may be unable to certify that our products are conflict free.
Our operations, and the operations of our customers and suppliers, are subject to risks of natural catastrophic events, widespread health epidemics, acts of war, terrorist attacks and the threat of domestic and international terrorist attacks, any one of which could result in cancellation of orders, delays in deliveries or other business activities, or loss of customers and could negatively affect our business and results of operations.
Our business is international in nature, with our sales, service and administrative personnel and our customers and suppliers located in numerous countries throughout the world. Our operations, and those of our customers and suppliers, are subject to disruption for a variety of reasons, including work stoppages, acts of war, terrorism, health epidemics, fires, earthquakes, hurricanes, volcanic eruptions, energy shortages, telecommunication failures, tsunamis, flooding or other natural disasters. Such disruption could materially increase our costs and expenses as well as cause delays in, among other things, shipments of products to our customers, our ability to perform services requested by our customers, or the installation and acceptance of our products at customer sites. Any of these conditions could have a material adverse effect on our business, financial conditions or results of operations.
A breach of our operational or security systems could negatively affect our business and results of operations.
We rely on various information technology networks and systems, some of which are managed by third parties, to process, transmit and store electronic information, including confidential data, and to carry out and support a variety of business activities, including manufacturing, research and development, supply chain management, sales and accounting. A failure in or a breach of our operational or security systems or infrastructure, or those of our suppliers and other service providers, including as a result of cyber attacks, could disrupt our business, result in the disclosure or misuse of proprietary or confidential information, damage our reputation, cause losses and increase our costs.
We may face risks associated with shareholder activism.
Publicly traded companies have increasingly become subject to campaigns by shareholders advocating corporate actions such as financial restructuring, increased borrowing, special dividends, stock repurchases or divestitures. We may become subject in the future to such shareholder activity and demands. Such activities could interfere with our ability to execute our business plans, be costly and time-consuming, disrupt our operations, divert the attention of management or result in our initiating borrowing or increasing our share repurchase plan or dividend, any of which could have an adverse effect on our business or stock price.
Provisions of our charter and by-laws and Massachusetts law make a takeover of Teradyne more difficult.
There are provisions in our basic corporate documents and under Massachusetts law that could discourage, delay or prevent a change in control, even if a change in control may be regarded as beneficial to some or all of our stockholders.
Item 1B. Unresolved Staff Comments
Item 2. Properties
| --- | --- |
The following table provides information as to our principal facilities:
| Location | Operating Segment | Major Activity+ | Approximate Square Feet of Floor Space | |||||||
| Properties owned: | ||||||||||
| North Reading, Massachusetts | Semiconductor Test & System Test | 1-2-3-4-5 | 422,000 | |||||||
| Agoura Hills, California | Semiconductor Test | 3-4 | 120,000 | |||||||
| Kumamoto, Japan | Semiconductor Test | 2-3-4-5 | 79,000 | |||||||
| 621,000 | ||||||||||
| Properties leased: | ||||||||||
| Cebu, Philippines | Semiconductor Test | 1-2-5 | 183,000 | |||||||
| San Jose, California | Semiconductor Test | 2-3-4-5 | 128,000 | |||||||
| Odense, Denmark | Industrial Automation | 2-3-4-5 | 121,000 | |||||||
| Buffalo Grove, Illinois | Semiconductor Test | 2-3-4-5 | 95,000 | |||||||
| Sunnyvale, California | Wireless Test & Semiconductor Test | 2-3-4-5 | 91,000 | |||||||
| Shanghai, China | Semiconductor Test, System Test, Wireless Test & Industrial Automation | 3-4-5 | 80,000 | |||||||
| Heredia, Costa Rica | Semiconductor Test | 1-5 | 49,000 | |||||||
| Hsinchu, Taiwan | Semiconductor Test & System Test | 4 | 43,000 | |||||||
| Singapore, Singapore | Semiconductor Test & Industrial Automation | 1-3-4 | 32,000 | |||||||
| Seoul, Korea | Semiconductor Test | 4 | 28,000 | |||||||
| 850,000 |
| + | Major activities have been separated into the following categories: 1. Corporate Administration, 2. Manufacturing, 3. Engineering, 4. Sales and Marketing, 5. Storage and Distribution. |
|---|
Item 3. Legal Proceedings
| --- | --- |
We are subject to legal proceedings, claims and investigations that arise in the ordinary course of business such as, but not limited to, patent, employment, commercial and environmental matters. We believe that we have meritorious defenses against all pending claims and intend to vigorously contest them. While it is not possible to predict or determine the outcomes of any pending claims or to provide possible ranges of losses that may arise, we believe the potential losses associated with all of these actions are unlikely to have a material adverse effect on our results of operations, financial condition or cash flows.
Item 4. Mine Safety Disclosure
Item 5. Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities
| --- | --- |
The following table shows the market range for our common stock based on reported sales price on the New York Stock Exchange and the dividends declared per share during such periods:
| Period | High | Low | Dividends | |||||||||
| 2014 | ||||||||||||
| First quarter | $ | 20.54 | $ | 17.36 | $ | N/A | ||||||
| Second quarter | 20.72 | 16.95 | 0.06 | (1) | ||||||||
| Third quarter | 20.88 | 17.74 | 0.06 | |||||||||
| Fourth quarter | 20.49 | 16.02 | 0.06 | |||||||||
| 2015 | ||||||||||||
| First quarter | $ | 20.15 | $ | 17.60 | $ | 0.06 | ||||||
| Second quarter | 21.33 | 18.03 | 0.06 | |||||||||
| Third quarter | 20.00 | 16.06 | 0.06 | |||||||||
| Fourth quarter | 21.58 | 18.09 | 0.06 |
| (1) | Dividend declared January 22, 2014 with a record date of May 9, 2014 and a payment date of June 2, 2014. |
|---|
The number of record holders of our common stock at February 22, 2016 was 1,898.
In January 2015, May 2015, August 2015 and November 2015, our Board of Directors declared a quarterly cash dividend of $0.06 per share.
In January 2014, August 2014 and November 2014, our Board of Directors declared a quarterly cash dividend of $0.06 per share.
In January 2015, our Board of Directors cancelled the November 2010 stock repurchase program and authorized a new stock repurchase program for up to $500 million of common stock. The cumulative repurchases as of December 31, 2015 totaled 15.6 million shares of common stock for $300 million at an average price per share of $19.20. In 2016, we intend to repurchase between $100 million and $200 million of common stock.
In November 2010, our Board of Directors authorized a stock repurchase program for up to $200 million. Under the November 2010 program, we repurchased 2.6 million shares of common stock for $31.2 million at an average price of $11.84 per share.
See “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations,” for information on our equity compensation plans and our performance graph.
Table of Contents
The following table includes information with respect to repurchases we made of our common stock during the quarter ended December 31, 2015 (in thousands except per share price):
| Period | (a) Total Number of Shares (or Units) Purchased | (b) Average Price Paid per Share (or Unit) | (c) Total Number of Shares (or Units) Purchased as Part of Publicly Announced Plans or Programs | (d) Maximum Number (or Approximate Dollar Value) of Shares (or Units) that may Yet Be Purchased Under the Plans or Programs | ||||||||||||
| October 5, 2015 – November 1, 2015 | 1,492 | $ | 18.49 | 1,480 | $ | 245,801 | ||||||||||
| November 2, 2015 – November 29, 2015 | 1,229 | $ | 20.09 | 1,228 | $ | 221,120 | ||||||||||
| November 30, 2015 – December 31, 2015 | 1,031 | $ | 20.48 | 1,029 | $ | 200,051 | ||||||||||
| 3,752 | (1) | $ | 19.56 | (1) | 3,737 | |||||||||||
| (1) | Includes approximately fifteen thousand shares at an average price of $20.25 withheld from employees for the payment of taxes. |
|---|
We satisfy U.S. federal and state minimum withholding tax obligations due upon the vesting and the conversion of restricted stock units into shares of our common stock, by automatically withholding from the shares being issued, a number of shares with an aggregate fair market value on the date of such vesting and conversion that would satisfy the minimum withholding amount due.
Item 6. Selected Financial Data
| --- | --- |
| Years Ended December 31, | ||||||||||||||||||||
| 2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||||
| (dollars in thousands, except per share amounts) | ||||||||||||||||||||
| Consolidated Statement of Operations Data (1)(2)(3)(4)(5)(6)(7): | ||||||||||||||||||||
| Revenues | $ | 1,639,578 | $ | 1,647,824 | $ | 1,427,933 | $ | 1,656,750 | $ | 1,429,061 | ||||||||||
| Income from continuing operations | 206,477 | 81,272 | 164,947 | 217,049 | 343,957 | |||||||||||||||
| Net income | $ | 206,477 | $ | 81,272 | $ | 164,947 | $ | 217,049 | $ | 369,873 | ||||||||||
| Income from continuing operations per common share—basic | $ | 0.98 | $ | 0.40 | $ | 0.86 | $ | 1.16 | $ | 1.86 | ||||||||||
| Income from continuing operations per common share—diluted | $ | 0.97 | $ | 0.37 | $ | 0.70 | $ | 0.94 | $ | 1.52 | ||||||||||
| Net income per common share—basic | $ | 0.98 | $ | 0.40 | $ | 0.86 | $ | 1.16 | $ | 2.00 | ||||||||||
| Net income per common share—diluted | $ | 0.97 | $ | 0.37 | $ | 0.70 | $ | 0.94 | $ | 1.63 | ||||||||||
| Cash dividend declared per common share | $ | 0.24 | $ | 0.18 | $ | — | $ | — | $ | — | ||||||||||
| Consolidated Balance Sheet Data: | ||||||||||||||||||||
| Total assets | $ | 2,548,674 | $ | 2,538,520 | $ | 2,629,824 | $ | 2,429,345 | $ | 2,188,639 | ||||||||||
| Short-term debt obligations | $ | — | $ | — | $ | 186,663 | $ | 2,328 | $ | 2,573 | ||||||||||
| Long-term debt obligations | $ | — | $ | — | $ | — | $ | 171,059 | $ | 159,956 | ||||||||||
| (1) | The Consolidated Statement of Operations Data for the year ended December 31, 2015 includes $17.7 million of pension actuarial losses, a $5.4 million gain from the sale of an equity investment and the results of operations of Universal Robots from June 12, 2015. |
|---|
Table of Contents
| (2) | The Consolidated Statement of Operations Data for the year ended December 31, 2014 includes a $98.9 million goodwill impairment charge related to the Wireless Test segment and $46.6 million of pension actuarial losses. |
|---|
| (3) | The Consolidated Statement of Operations Data for the year ended December 31, 2013 includes a $34.2 million gain from the sale of an equity investment and $10.3 million of pension actuarial gains. |
|---|
| (4) | The Consolidated Statement of Operations Data for the year ended December 31, 2012 includes $23.3 million of pension actuarial losses. |
|---|
| (5) | The Consolidated Statement of Operations Data for the year ended December 31, 2011 includes a tax benefit of $129.5 million due primarily to the release of the deferred tax valuation allowance and $13.6 million of pension actuarial losses. |
|---|
| (6) | The Consolidated Statement of Operations Data for the year ended December 31, 2011 includes the results of operations of LitePoint from October 5, 2011. |
|---|
| (7) | As a result of the divestiture of Diagnostic Test Solutions in 2011, we are reporting this business unit as discontinued operations for 2011. |
|---|
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
| --- | --- |
Overview
We are a leading global supplier of automation equipment for test and industrial applications. We design, develop, manufacture and sell automatic test systems used to test semiconductors, wireless products, data storage and complex electronics systems in the consumer electronics, wireless, automotive, industrial, computing, communications, and aerospace and defense industries. Our industrial automation products include collaborative robots used by global manufacturing and light industrial customers to improve quality, increase manufacturing efficiency and decrease manufacturing costs. Our automatic test equipment and industrial automation products and services include:
| • | semiconductor test (“Semiconductor Test”) systems; |
|---|
| • | defense/aerospace (“Defense/Aerospace”) test instrumentation and systems, storage test (“Storage Test”) systems, and circuit-board test and inspection (“Production Board Test”) systems (collectively these products represent “System Test”); |
|---|
| • | wireless test (“Wireless Test”) systems; and |
|---|
| • | industrial automation (“Industrial Automation”) products. |
|---|
We have a broad customer base which includes integrated device manufacturers (“IDMs”), outsourced semiconductor assembly and test providers (“OSATs”), wafer foundries, fabless companies that design, but contract with others for the manufacture of integrated circuits (“ICs”), developers of wireless devices and consumer electronics, manufacturers of circuit boards, automotive suppliers, wireless product manufacturers, storage device manufacturers, aerospace and military contractors, and distributors that sell collaborative robots.
On June 11, 2015, we acquired Universal Robots A/S (“Universal Robots”) for approximately $284 million of cash plus up to an additional $65 million of cash if certain performance targets are met extending through 2018. Universal Robots is the leading supplier of collaborative robots which are low-cost, easy-to-deploy and simple-to-program robots that work side by side with production workers to improve quality, increase manufacturing efficiency and decrease manufacturing costs. Universal Robots is a separate operating and reportable segment, Industrial Automation. The acquisition of Universal Robots provides a growth engine to our business and complements our existing System Test and Wireless Test segments. The total purchase price for Universal Robots was approximately $315 million.
In 2014, we acquired Avionics Interface Technologies, LLC (“AIT”), a supplier of equipment for testing state-of-the-art data communication buses. The acquisition of AIT complements our Defense/Aerospace line of bus test instrumentation for commercial and defense avionics systems. AIT is included in our System Test
Table of Contents
segment. The total purchase price for AIT was approximately $21 million, which included cash paid of approximately $19 million and $2 million in fair value of contingent consideration payable upon achievement of revenue and gross margin targets in 2015 and 2016. No contingent consideration was paid for 2015. The maximum remaining contingent consideration that could be paid is $1.1 million.
In 2013, we acquired ZTEC Instruments Inc. (“ZTEC”), a supplier of modular wireless test instruments. The acquisition of ZTEC expands our Wireless Test segment into the design verification test of wireless components and chipsets. The total purchase price for ZTEC was approximately $17 million, which included cash paid of approximately $15 million and $2 million in fair value of contingent consideration payable upon achievement of certain customer order and revenue targets through 2015. None of the contingent consideration was paid.
We believe our recent acquisitions have enhanced our opportunities for growth. We will continue to invest in our business, grow market share in our markets and expand further our addressable markets while tightly managing our costs.
The sales of our products and services are dependent, to a large degree, on customers who are subject to cyclical trends in the demand for their products. These cyclical periods have had, and will continue to have, a significant effect on our business since our customers often delay or accelerate purchases in reaction to changes in their businesses and to demand fluctuations in the semiconductor and electronics industries. Historically, these demand fluctuations have resulted in significant variations in our results of operations. The sharp swings in the semiconductor and electronics industries in recent years have generally affected the semiconductor and electronics test equipment and services industries more significantly than the overall capital equipment sector.
In the fourth quarter of 2014, we performed our annual goodwill impairment test and recorded a goodwill impairment charge of $98.9 million in our Wireless Test segment as a result of decreased projected demand attributable to an estimated smaller future wireless test market due to reuse of wireless test equipment, price competition and different testing techniques. Further reductions in the size of the wireless test market may occur, which may result in additional goodwill impairment charges, increased risk of excess and obsolete inventories, asset write-offs and restructuring charges.
Critical Accounting Policies and Estimates
We have identified the policies discussed below as critical to understanding our business and our results of operations and financial condition. The impact and any associated risks related to these policies on our business operations is discussed throughout Management’s Discussion and Analysis of Financial Condition and Results of Operations where such policies affect our reported and expected financial results.
Revenue Recognition
We recognize revenues when there is persuasive evidence of an arrangement, title and risk of loss have passed, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to our customers upon shipment or at delivery destination point. In circumstances where either title or risk of loss pass upon destination, acceptance or cash payment, we defer revenue recognition until such events occur except when title transfer is tied to cash payment outside the United States. Outside the United States, we recognize revenue upon shipment or at delivery destination point, even if we retain a form of title to products delivered to customers, provided the sole purpose is to enable us to recover the products in the event of customer payment default and the arrangement does not prohibit the customer’s use or resale of the product in the ordinary course of business.
Our equipment has non-software and embedded software components that function together to deliver the equipment’s essential functionality. Revenue is recognized upon shipment or at delivery destination point, provided that customer acceptance criteria can be demonstrated prior to shipment. Certain contracts require us to
Table of Contents
perform tests of the product to ensure that performance meets the published product specifications or customer requested specifications, which are generally conducted prior to shipment. Where the criteria cannot be demonstrated prior to shipment, revenue is deferred until customer acceptance has been received. We also defer the portion of the sales price that is not due until acceptance, which represents deferred profit.
For multiple element arrangements, we allocate revenue to all deliverables based on their relative selling prices. In such circumstances, a hierarchy is used to determine the selling price for allocating revenue to deliverables as fol
Showing the first 8K of 74K characters. Open the full section
Item 7A. Quantitative and Qualitative Disclosures about Market Risks
| --- | --- |
Concentration of Credit Risk
Financial instruments which potentially subject us to concentrations of credit risk consist principally of cash equivalents, marketable securities, forward currency contracts and accounts receivable. Our cash equivalents consist primarily of money market funds invested in U.S. Treasuries and government agencies. Our fixed income available-for-sale marketable securities have a minimum rating of AA by one or more of the major credit rating agencies. We place forward currency contracts with high credit-quality financial institutions in order to minimize credit risk exposure. Concentrations of credit risk with respect to accounts receivable are limited due to the large number of geographically dispersed customers. We perform ongoing credit evaluations of our customers’ financial condition and from time to time may require customers to provide a letter of credit from a bank to secure accounts receivable. One customer accounted for more than 10% of our accounts receivable balance as of December 31, 2015. A different customer accounted for more than 10% of our accounts receivable balance as of December 31, 2014.
Exchange Rate Risk Management
We regularly enter into foreign currency forward contracts to hedge the value of our monetary assets and liabilities in Japanese Yen, British Pound, Korean Won, Taiwan Dollar, Singapore Dollar and Euro. These foreign currency forward contracts have maturities of approximately one month. These contracts are used to minimize the effect of exchange rate fluctuations associated with the remeasurement of monetary assets and liabilities. We do not engage in currency speculation.
We performed a sensitivity analysis assuming a hypothetical 10% fluctuation in foreign exchange rates to the hedging contracts and the underlying exposures described above. As of December 31, 2015, 2014 and 2013, the analysis indicated that these hypothetical market movements would not have a material effect on our consolidated financial position, results of operations or cash flows.
Table of Contents
Interest Rate Risk Management
We are exposed to potential losses due to changes in interest rates. Our interest rate exposure is primarily in the Netherlands, United States and Singapore related to short-term and long-term marketable securities.
In order to estimate the potential loss due to interest rate risk, a fluctuation in interest rates of 25 basis points was assumed. Market risk for the short and long-term marketable securities was estimated as the potential change in the fair value resulting from a hypothetical change in interest rates for securities contained in the investment portfolio. The potential change in the fair value from changes in interest rates is immaterial as of December 31, 2015 and 2014.
Table of Contents
Item 8. Financial Statements and Supplementary Data
| --- | --- |
Report of Independent Registered Public Accounting Firm
To the Board of Directors and Shareholders of Teradyne, Inc.:
In our opinion, the consolidated financial statements listed in the index appearing under Item 15(a) (1) present fairly, in all material respects, the financial position of Teradyne, Inc. and its subsidiaries (the “Company”) at December 31, 2015 and 2014, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2015 in conformity with accounting principles generally accepted in the United States of America. In addition, in our opinion, the financial statement schedule listed in the index appearing under Item 15(a)(2) presents fairly, in all material respects, the information set forth therein when read in conjunction with the related consolidated financial statements. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements and financial statement schedule, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Annual Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements, on the financial statement schedule, and on the Company’s internal control over financial reporting based on our integrated audits. We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
As described in Management’s Annual Report on Internal Controls over Financial Reporting appearing under Item 9A, management has excluded Universal Robots A/S from its assessment of internal control over financial reporting as of December 31, 2015 because it was acquired by the Company in a purchase business combination on June 11, 2015. We have also excluded Universal Robots A/S from our audit of internal control over financial reporting. Universal Robots A/S is a wholly-owned subsidiary whose total assets and total revenues represent 14% and 3%, respectively, of the related consolidated financial statement amounts as of and for the year ended December 31, 2015.
/s/ PricewaterhouseCoopers LLP
Boston, Massachusetts
February 29, 2016
Table of Contents
TERADYNE, INC.
CONSOLIDATED BALANCE SHEETS
December 31, 2015 and 2014
| 2015 | 2014 | |||||||
| (in thousands, except per share information) | ||||||||
| ASSETS | ||||||||
| Current assets: | ||||||||
| Cash and cash equivalents | $ | 264,705 | $ | 294,256 | ||||
| Marketable securities | 477,696 | 533,787 | ||||||
| Accounts receivable, less allowance for doubtful accounts of $2,407 and $2,491 in 2015 and 2014, respectively | 211,293 | 151,034 | ||||||
| Inventories: | ||||||||
| Parts | 73,117 | 70,821 | ||||||
| Assemblies in process | 32,825 | 10,347 | ||||||
| Finished goods | 47,646 | 23,961 | ||||||
| 153,588 | 105,129 | |||||||
| Deferred tax assets | 54,973 | 57,239 | ||||||
| Prepayments | 91,519 | 95,819 | ||||||
| Other current assets | 6,194 | 6,582 | ||||||
| Total current assets | 1,259,968 | 1,243,846 | ||||||
| Property, plant and equipment, net | 273,414 | 329,038 | ||||||
| Marketable securities | 265,928 | 470,789 | ||||||
| Deferred tax assets | 7,404 | 7,494 | ||||||
| Other assets | 13,080 | 10,419 | ||||||
| Retirement plans assets | 636 | 12,896 | ||||||
| Intangible assets, net | 239,831 | 190,600 | ||||||
| Goodwill | 488,413 | 273,438 | ||||||
| Total assets | $ | 2,548,674 | $ | 2,538,520 | ||||
| LIABILITIES | ||||||||
| Current liabilities: | ||||||||
| Accounts payable | $ | 92,358 | $ | 47,763 | ||||
| Accrued employees’ compensation and withholdings | 113,994 | 100,994 | ||||||
| Deferred revenue and customer advances | 85,527 | 71,603 | ||||||
| Other accrued liabilities | 43,727 | 50,247 | ||||||
| Contingent consideration | 15,500 | 895 | ||||||
| Accrued income taxes | 21,751 | 20,049 | ||||||
| Total current liabilities | 372,857 | 291,551 | ||||||
| Long-term deferred revenue and customer advances | 25,745 | 19,929 | ||||||
| Retirement plans liabilities | 103,531 | 108,460 | ||||||
| Deferred tax liabilities | 26,663 | 23,315 | ||||||
| Long-term other accrued liabilities | 32,156 | 13,830 | ||||||
| Long-term contingent consideration | 21,936 | 2,455 | ||||||
| Total liabil |
Showing the first 8K of 222K characters. Open the full section
Item 9. Changes in and disagreements with accountants on accounting and financial disclosure
| --- | --- |
None.
Item 9A. Controls and procedures
| --- | --- |
Disclosure Controls and Procedures
As of the end of the period covered by this report, our management, with the participation of our CEO and CFO, evaluated the effectiveness of our disclosure controls and procedures pursuant to Rule 13a-15(b) promulgated under the Exchange Act. Based upon that evaluation, our CEO and CFO concluded that, as of the end of the period covered by this report, our disclosure controls and procedures were effective in ensuring that material information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, including ensuring that such material information is accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.
Changes in Internal Control Over Financial Reporting
There was no change in our internal control over financial reporting during the fourth fiscal quarter ended December 31, 2015 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.
Management’s Annual Report on Internal Control over Financial Reporting
In accordance with SEC responses to frequently asked questions regarding the evaluation of internal control of entities subject to a business combination, we have excluded Universal Robots from our assessment of internal control over financial reporting as of December 31, 2015. As previously announced, we acquired Universal Robots A/S on June 11, 2015 pursuant to a Share Sale and Purchase Agreement, dated as of May 13, 2015. The total assets and total revenues of Universal Robots represent 14% and 3%, respectively, of our consolidated financial statement amounts as of and for the year ended December 31, 2015.
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal Control—Integrated Framework (2013), our management concluded that our internal control over financial reporting was effective as of December 31, 2015.
The effectiveness of our internal control over financial reporting as of December 31, 2015 has been audited by PricewaterhouseCoopers LLP, our independent registered public accounting firm, as stated in their report which is included under Item 8 of this Annual Report.
Inherent Limitations on Effectiveness of Controls
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
Item 9B. Other Information
Item 10. Directors, Executive Officers and Corporate Governance
| --- | --- |
Certain information relating to our directors and executive officers, committee information, reports and charters, executive compensation, security ownership of certain beneficial owners and management and related stockholder matters, and certain relationships and related transactions is incorporated by reference herein from our definitive proxy statement in connection with our Annual Meeting of Shareholders to be held on May 10, 2016. The proxy statement will be filed with the SEC not later than 120 days after the close of the fiscal year. For this purpose, the Compensation Committee Report included in such proxy statement is specifically not incorporated herein. Also see “Item 1: Business—Our Executive Officers.”
Item 11. Executive Compensation
| --- | --- |
Certain information relating to our directors and executive officers, executive compensation, security ownership of certain beneficial owners and management and related stockholder matters, and certain relationships and related transactions is incorporated by reference herein from our definitive proxy statement in connection with our Annual Meeting of Shareholders to be held on May 10, 2016. The proxy statement will be filed with the SEC not later than 120 days after the close of the fiscal year. For this purpose, the Compensation Committee Report included in such proxy statement is specifically not incorporated herein.
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
| --- | --- |
Certain information relating to our directors and executive officers, executive compensation, security ownership of certain beneficial owners and management and related stockholder matters, and certain relationships and related transactions is incorporated by reference herein from our definitive proxy statement in connection with our Annual Meeting of Shareholders to be held on May 10, 2016. The proxy statement will be filed with the SEC not later than 120 days after the close of the fiscal year. For this purpose, the Compensation Committee Report included in such proxy statement is specifically not incorporated herein. Also see “Item 7: Management’s Discussion and Analysis of Financial Condition and Results of Operations—Equity Compensation Plans.”
Item 13. Certain Relationships and Related Transactions, and Director Independence
| --- | --- |
Certain information relating to our directors and executive officers, executive compensation, security ownership of certain beneficial owners and management and related stockholder matters, and certain relationships and related transactions is incorporated by reference herein from our definitive proxy statement in connection with our Annual Meeting of Shareholders to be held on May 10, 2016. The proxy statement will be filed with the SEC not later than 120 days after the close of the fiscal year. For this purpose, the Compensation Committee Report included in such proxy statement is specifically not incorporated herein.
Item 14. Principal Accountant Fees and Services
| --- | --- |
Certain information relating to audit fees and other of Teradyne’s independent registered public accounting firm is incorporated by reference herein from our definitive proxy statement in connection with our Annual Meeting of Shareholders to be held on May 10, 2016. The proxy statement will be filed with the SEC not later than 120 days after the close of the fiscal year. For this purpose, the Audit Committee Report included in such proxy statement is specifically not incorporated herein.
Table of Contents
PART IV
Item 15. Exhibits and Financial Statement Schedules.
| --- | --- |
15(a)(1) Financial Statements
The following consolidated financial statements are included in Item 8:
15(a)(2) Financial Statement Schedule
The following consolidated financial statement schedule is included in Item 15(c):
Schedule II—Valuation and Qualifying Accounts
Schedules other than those listed above have been omitted since they are either not required or information is otherwise included.
15(a)(3) Listing of Exhibits
The Exhibits which are filed with this report or which are incorporated by reference herein are set forth in the Exhibit Index.
15(c) Financial Statement Schedules
Table of Contents
TERADYNE, INC.
SCHEDULE II—VALUATION AND QUALIFYING ACCOUNTS
| Column A | Column B | Column C | Column D | Column E | Column F | |||||||||||||||
| Description | Balance at Beginning of Period | Additions Charged to Cost and Expenses | Other | Deductions | Balance at End of Period | |||||||||||||||
| (in thousands) | ||||||||||||||||||||
| Valuation reserve deducted in the balance sheet from the asset to which it applies: | ||||||||||||||||||||
| Accounts receivable: | ||||||||||||||||||||
| 2015 Allowance for doubtful accounts | $ | 2,491 | $ | — | $ | — | $ | 84 | $ | 2,407 | ||||||||||
| 2014 Allowance for doubtful accounts | $ | 2,912 | $ | 55 | $ | — | $ | 476 | $ | 2,491 | ||||||||||
| 2013 Allowance for doubtful accounts | $ | 4,118 | $ | 69 | $ | — | $ | 1,275 | (1) | $ | 2,912 | |||||||||
| (1) | Based upon an improvement in the aging of accounts receivables in 2013, Teradyne reduced its allowance for doubtful accounts by approximately $1 million. |
|---|
| Column A | Column B | Column C | Column D | Column E | Column F | |||||||||||||||
| Description | Balance at Beginning of Period | Additions Charged to Cost and Expenses | Other | Deductions | Balance at End of Period | |||||||||||||||
| (in thousands) | ||||||||||||||||||||
| Valuation reserve deducted in the balance sheet from the asset to which it applies: | ||||||||||||||||||||
| Inventory: | ||||||||||||||||||||
| 2015 Inventory reserve | $ | 111,252 | $ | 21,332 | $ | 1,680 | $ | 14,888 | $ | 119,376 | ||||||||||
| 2014 Inventory reserve | $ | 115,857 | $ | 22,193 | $ | 7,064 | $ | 33,862 | $ | 111,252 | ||||||||||
| 2013 Inventory reserve | $ | 141,838 | $ | 16,592 | $ | 2,568 | $ | 45,141 | $ | 115,857 | ||||||||||
| Column A | Column B | Column C | Column D | Column E | Column F | |||||||||||||||
| Description | Balance at Beginning of Period | Additions Charged to Cost and Expenses | Other | Deductions | Balance at End of Period | |||||||||||||||
| (in thousands) | ||||||||||||||||||||
| Valuation reserve deducted in the balance sheet from the asset to which it applies: | ||||||||||||||||||||
| Deferred taxes: | ||||||||||||||||||||
| 2015 Valuation allowance | $ | 41,737 | $ | 1,322 | $ | — | $ | 20 | $ | 43,039 | ||||||||||
| 2014 Valuation allowance | $ | 40,386 | $ | 1,380 | $ | — | $ | 29 | $ | 41,737 | ||||||||||
| 2013 Valuation allowance | $ | 55,446 | $ | 4,546 | $ | — | $ | 19,606 | $ | 40,386 | ||||||||||
Table of Contents
EXHIBIT INDEX
The following designated exhibits are, as indicated below, either filed herewith or have heretofore been filed with the Securities and Exchange Commission and are referred to and incorporated by reference to such filings.
| Exhibit No. | Description | SEC Document Reference | ||
| 2.1 | Share Sale and Purchase Agreement by and among Teradyne Holdings Denmark ApS, Teradyne Inc. and the shareholders of Universal Robots A/S dated May 13, 2015. | Exhibit 2.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 5, 2015. | ||
| 3.1 | Restated Articles of Organization, as amended. | Exhibit 3.01 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 2, 2000. | ||
| 3.2 | Amended and Restated By-laws, as amended. | Exhibit 3.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2007. | ||
| 10.1† | Standard Manufacturing Agreement entered into as of November 24, 2003 by and between Teradyne and Solectron. | Exhibit 10.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2007. | ||
| 10.2† | Amendment 1 to Standard Manufacturing Agreement, dated as of January 18, 2007, by and between Teradyne and Solectron. | Exhibit 10.2 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2007. | ||
| 10.3† | Second Amendment to Standard Manufacturing Agreement, dated as of August 27, 2007, by and between Teradyne and Solectron. | Exhibit 10.3 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2007. | ||
| 10.4 | Fifth Amendment to Standard Manufacturing Agreement, dated as of July 17, 2009, by and between Teradyne and Flextronics Corporation. | Exhibit 10.4 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009. | ||
| 10.5† | Sixth Amendment to Standard Manufacturing Agreement, dated as of July 27, 2009, by and between Teradyne and Flextronics Corporation. | Exhibit 10.5 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009. | ||
| 10.6 | Addendum to Standard Manufacturing Agreement (Authorized Purchase Agreement)—Revised July 1, 2010. | Exhibit 10.6 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2010. | ||
| 10.7 | Eighth Amendment to Standard Manufacturing Agreement, dated as of April 13, 2012, by and between Teradyne and Flextronics Sales & Marketing North Asia (L) LTD. | Exhibit 10.7 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. | ||
| 10.8† | Ninth Amendment to Standard Manufacturing Agreement, dated as of September 17, 2012, by and between Teradyne and Flextronics Sales & Marketing North Asia (L) LTD. | Exhibit 10.8 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. |
Table of Contents
| Exhibit No. | Description | SEC Document Reference | ||
| 10.9 | 2006 Equity and Cash Compensation Incentive Plan, as amended.* | Appendix A to Teradyne’s Notice and Proxy Statement on Schedule 14A filed April 2, 2015. | ||
| 10.10 | Form of Performance-Based Restricted Stock Unit Agreement for Executive Officers under 2006 Equity and Cash Compensation Incentive Plan.* | Filed herewith. | ||
| 10.11 | Form of Time-Based Restricted Stock Unit Agreement for Executive Officers under 2006 Equity and Cash Compensation Incentive Plan.* | Filed herewith. | ||
| 10.12 | Form of Restricted Stock Unit Agreement for Directors under 2006 Equity and Cash Compensation Incentive Plan.* | Filed herewith. | ||
| 10.13 | 1996 Employee Stock Purchase Plan, as amended.* | Appendix B to Teradyne’s Notice and Proxy Statement on Schedule 14A filed April 11, 2013. | ||
| 10.14 | Form of Executive Officer Stock Option Agreement under 2006 Equity and Cash Compensation Incentive Plan, as amended.* | Filed herewith. | ||
| 10.15 | Deferral Plan for Non-Employee Directors, as amended.* | Exhibit 10.2 to Teradyne’s Quarterly Report on form 10-Q for the quarter ended September 28, 2008. | ||
| 10.16 | Supplemental Savings Plan, as amended and restated.* | Exhibit 10.18 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. | ||
| 10.17 | Supplemental Executive Retirement Plan, as restated.* | Exhibit 10.19 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. | ||
| 10.18 | Agreement Regarding Termination Benefits dated January 22, 2014 between Teradyne and Mark Jagiela.* | Exhibit 10.24 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2013. | ||
| 10.19 | Employment Agreement dated August 9, 2004 between Teradyne and Gregory R. Beecher.* | Exhibit 10.40 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 4, 2004. | ||
| 10.20 | Employment Agreement dated May 7, 2004 between Teradyne and Mark Jagiela.* | Exhibit 10.37 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 4, 2004. | ||
| 10.21 | Amended and Restated Executive Officer Change in Control Agreement dated December 30, 2008 between Teradyne and Gregory R. Beecher, as amended.* | Exhibit 10.28 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. |
Table of Contents
| Exhibit No. | Description | SEC Document Reference | ||
| 10.22 | Executive Officer Change in Control Agreement dated January 22, 2014 between Teradyne and Mark Jagiela, as amended.* | Exhibit 10.29 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2013. | ||
| 10.23 | Amended and Restated Executive Officer Change in Control Agreement dated May 26, 2009 between Teradyne and Charles J. Gray, as amended.* | Exhibit 10.30 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. | ||
| 10.24 | Employment Agreement dated July 24, 2009 between Teradyne and Charles J. Gray.* | Exhibit 10.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended April 4, 2010. | ||
| 10.25 | Amended and Restated Executive Officer Change in Control Agreement dated June 30, 2012 between Teradyne and Walter G. Vahey, as amended.* | Exhibit 10.32 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. | ||
| 10.26 | Employment Agreement dated February 6, 2013 between Teradyne and Walter G. Vahey.* | Exhibit 10.33 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2012. | ||
| 10.27 | Executive Officer Agreement dated June 29, 2012 between Teradyne and Jeffrey Hotchkiss.* | Exhibit 10.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 1, 2012. | ||
| 10.28 | Executive Officer Change in Control Agreement dated September 1, 2014 between Teradyne, Inc. and Bradford Robbins.* | Exhibit 10.1 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 28, 2014. | ||
| 10.29 | Employment Agreement dated September 1, 2014 between Teradyne, Inc. and Bradford Robbins.* | Exhibit 10.2 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended September 28, 2014. | ||
| 10.30 | Form of Indemnification Agreement.* | Exhibit 10.24 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2006. | ||
| 10.31 | Nextest Systems Corporation 1998 Equity Incentive Plan, as amended. | Exhibit 10.33 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. | ||
| 10.32 | Nextest Systems Corporation 2006 Equity Incentive Plan. | Exhibit 10.34 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. | ||
| 10.33 | Eagle Test Systems, Inc. 2003 Stock Option and Grant Plan. | Exhibit 10.35 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. | ||
| 10.34 | Eagle Test Systems, Inc. 2006 Stock Option and Incentive Plan. | Exhibit 10.36 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. |
Table of Contents
| Exhibit No. | Description | SEC Document Reference | ||
| 10.35 | LitePoint Corporation 2002 Stock Plan. | Exhibit 10.42 to Teradyne’s Annual Report on Form 10-K for the fiscal year ended December 31, 2011. | ||
| 10.36 | Credit Agreement among Teradyne, Inc., Barclays Bank PLC, as the administrative agent and collateral agent, and the lenders party thereto dated April 27, 2015. | Exhibit 10.1 to Teradyne’s Current Report on Form 8-K filed May 1, 2015. | ||
| 10.37 | Amendment No. 1 to Credit Agreement dated as of May 19, 2015 among Teradyne Inc., Barclays Bank PLC, as the administrative agent, and the lenders party thereto. | Exhibit 10.2 to Teradyne’s Quarterly Report on Form 10-Q for the quarter ended July 5, 2015. | ||
| 21.1 | Subsidiaries of Teradyne. | Filed herewith. | ||
| 23.1 | Consent of PricewaterhouseCoopers LLP. | Filed herewith. | ||
| 31.1 | Rule 13a-14(a) Certification of Principal Executive Officer. | Filed herewith. | ||
| 31.2 | Rule 13a-14(a) Certification of Principal Financial Officer. | Filed herewith. | ||
| 32.1 | Section 1350 Certification of Principal Executive Officer. | Furnished herewith. | ||
| 32.2 | Section 1350 Certification of Principal Financial Officer. | Furnished herewith. | ||
| 101.INS | XBRL Instance Document | |||
| 101.SCH | XBRL Taxonomy Extension Schema Document | |||
| 101.CAL | XBRL Taxonomy Extension Calculation Linkbase Document | |||
| 101.DEF | XBRL Taxonomy Extension Definition Linkbase Document | |||
| 101.LAB | XBRL Taxonomy Extension Label Linkbase Document | |||
| 101.PRE | XBRL Taxonomy Extension Presentation Linkbase Document |
| † | -Confidential treatment granted. |
|---|
| * | -Management contract or compensatory plan. |
|---|
Table of Contents
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized this 29th day of February, 2016.
| TERADYNE, INC. | ||
| By: | /S/ GREGORY R. BEECHER | |
| Gregory R. Beecher, | ||
| Vice President, Chief Financial Officer and Treasurer |
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.
| Signature | Title | Date | ||
| /S/ ROY A. VALLEE Roy A. Vallee | Chair of the Board | February 29, 2016 | ||
| /S/ MARK E. JAGIELA Mark E. Jagiela | Chief Executive Officer (Principal Executive Officer) | February 29, 2016 | ||
| /S/ GREGORY R. BEECHER Gregory R. Beecher | Vice President, Chief Financial Officer and Treasurer (Principal Financial and Accounting Officer) | February 29, 2016 | ||
| /S/ MICHAEL A. BRADLEY Michael A. Bradley | Director | February 29, 2016 | ||
| /S/ DANIEL W. CHRISTMAN Daniel W. Christman | Director | February 29, 2016 | ||
| /S/ EDWIN J. GILLIS Edwin J. Gillis | Director | February 29, 2016 | ||
| /S/ TIMOTHY E. GUERTIN Timothy E. Guertin | Director | February 29, 2016 | ||
| /S/ MERCEDES JOHNSON Mercedes Johnson | Director | February 29, 2016 | ||
| /S/ PAUL J. TUFANO Paul J. Tufano | Director | February 29, 2016 |